Question about Health & Beauty

1 Answer

Pride legend xl8 scooter electrical harness from control unit to tiller switches not working ie,ingnition light and speed control not functioning at all? please help michael

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi,


First take the control panel off, (panel that has the battery power display etc ) take care in doing to make sure you don't pull any wires off.
first check the wiring on the ignition switch, check the speed pot by moving it up and down,
Check the connections to the battery follow the wires from the battery to the Motor controller, normally marked B+, B-, then follow from the motor controller to the motor again checking the connections.
Make sure the freewheel lever stays in position
.


Please check the link bellow to diagnose your problem:


http://www.pridemobility.com/pdf/Owners_Manuals/INTL_Scooter/uk/UK_Legend_Classic_XL_8_om.pdf


Please accept the solution if it's helpful. Do get back to us for any further query.


Thanks for contacting fixya.com

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 3wh. 'LR'model Pride scooter for


I'd be looking at the motor controller first. Since you don't have any flashing leds to indicate a problem, perhaps the brushes on the motors need replacing.

Jul 28, 2017 | Pride Mobility Products Pride Mobility...

1 Answer

Legend classic x18 measurements


hi, can you explain in more detail what information you require ?

The XL8 is one of the best 8mph mobility scooters out there, sadly it been replaced by the Pride colt brand..

Regards

Jan 21, 2013 | Pride New Mobility Legend 4 Wheel Scooter

1 Answer

Colt xl8 code 7 fault changed speed pot still cuts out


hi, can i ask you what the pot was like , a electronic one or mechanical one ?

If it's Electronic check there is a 24v - + plus voltage on the red and black cable. This is a common problem with these scooters.

regards
www.gewizrepairs.co.uk

Jan 07, 2013 | Pride Mobility Products Pride Legend XL -...

2 Answers

The right hand side indicator does not work on my Pride Legend Classic XL8. I have checked the fuses and they are ok. The left hand side indicator and the hazard flashers work perfectly. Please help.


Hi if when you put the hazzard lights on all the indicators work then this suggests the problem is with the indicator switch, you may need to get it replaced, it could be that it has got corroded due to rain or damp getting in, if the hazzords are working ok then you know the fuse and bulbs are good so all thats left that could be wrong is the switch that works the indicators.
this will need removing and replacing to solve your problem

Aug 18, 2010 | Pride Mobility Products Pride Legend XL -...

1 Answer

How do i remove the pride legend classic xl8 seat


hi, be careful here as it can make your back ache,
now there is a lever to the right of the seat, pull it up towards you and
turn your seat 90 anticlockwise, so the seats not facing the control panel, at right angles, you should now be able to lift the seat , take great care here if you have back problems in the past as some seats are quite heavy.

Regards
GeWiz.

Dec 12, 2009 | Pride New Mobility Legend 4 Wheel Scooter

2 Answers

I have an xl8 mobility scooter that keeps cutting out and stopping dead, i then switch it off and on and it starts, could it be the motor?


My Pride Colt XL8 keeped cutting out (7 flashes of LED, Speed pot error) , checked all the cable connections up tiller arm as recommended by Pride technical support, worked for about a week, then problem returned. Eventually took to Pride dealer, with problem occasional occurring,they found it to be the lower tiller cable support bracket straining the cables connector intermittently and so removed the bracket, the problem then was solved !

Oct 19, 2009 | Pride Mobility Products Pride Legend XL -...

1 Answer

I have mislaid my Legend Classic XL8 manual & wish to know all the flash error codes


This page has a link to the users manual near the bottom:

http://www.cheapest-scooters.co.uk/8mph/pride-legend-classic-xl8-mobility-scooter.html

Aug 21, 2009 | Pride New Mobility Legend 4 Wheel Scooter

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...