Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

I have a Janome MC 9000 that will not power on. I changed the light bulb while it was powered on and as soon as I plugged in the bulb the machine shut down. It has been dead since. I had no problems with it up until that point and I'm afraid I've crashed the memory board....ANY SUGGESTIONS? I'm desperate:( Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,788 Answers

Your machine has a fuse, go to www.sewingpartsonline.com and you will see your machine. It gives the fuse # and it costs $6.95 but you may be able to get one from Radio Shack.Good luck

Posted on Oct 04, 2010

  • 9to5 Oct 05, 2010

    Thank you for the information. Now I have to find where to get the fuse and then find where on the machine it goes...LOL! Someone that works on Janome told me that if the circuit board is shot then I just need to toss my machine in the dump...the thought of that makes me sick, this was not a cheap machine! Any info on a "circuit board"?

  • Mary Dunn Oct 05, 2010

    Maybe, if you call the sewingpartsonline.com and ask them how to find where the fuse goes, they will email you directions, Just a suggestion. Or just plain ask Janome at 1-800-631-0183. I know that you do not have a cheap machine, but someone should help you from Janome. I will keep my fingers crossed for you. Good luck

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the bulb located on the MC 9000


You can find it inside the side cover (left hand side).

Dec 14, 2013 | Janome Memory Craft 9000 Computerized...

2 Answers

Janome Memory Craft 9000 slow to power on


it could be the power cord, or a computer part, it needs to be serviced

Mar 13, 2012 | Janome Memory Craft 9000 Computerized...

1 Answer

Need a power cord for MC 9000


That is a real common power cord, it should be available at sewing machine repair shops.

Oct 17, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

Does this machine have a low shank --- or high shank?


High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop


Bargain Box

Apr 19, 2010 | Janome Memory Craft 9000 Computerized...

2 Answers

Changing light bulb on Memory Craft 8000


When your Memory Craft 8000 or MC 5700 is otherwise working fine but the LCD display screen begins to grow darker and you find you just can't read it, the only thing you can do is replace the LCD screen, or buy a new machine.
Janome no longer stock this item direct, but there is an affordable replacement available.
Full Access and Installation instructions are provided, so you can DIY or have someone else do the replacement for you.

Check this Link
Also includes advice, links & contacts to be able to Reset your screen and do a Self Diagnosis Routine to test your machine BEFORE you purchase a replacement LCD backlight for either the Janome MC 8000 or MC 5700, so you can check that there are no other troubles.

Feb 05, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

How do i install my el board in my janome mc 8000 sewing machine


Try this link for an affordable solution to repairing your Janome MC 8000 Display Back Light Janome Memory Craft 8000 LCD Backlight Replacement Kit. The kit comes with a custom repair manual specifically written for back light replacement.

Dec 28, 2009 | Janome Memory Craft 9000 Computerized...

3 Answers

Janome MC 9000 off touch screen calibration


Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

Nov 16, 2009 | Janome Memory Craft 9000 Computerized...

2 Answers

New home 8000 memory craft embroidery machine


Locate a Janome dealer and have him order them for you. The power cord can be purchased from Radio Shack if the dealer doesn't have one.
sewman7

Jul 19, 2008 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...