Question about Blendtec Extra Carafe / Jar for the Total Blender (Blend-Tec) Blender

2 Answers

My blendtec blender is displaying the message watchdog timeout why ? please help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with the Watchdog reading and I simply turned the On Off Switch really fast and Presto! It worked!

Posted on Mar 14, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Mine too. There is a device on the circuit board called a 'rectifier' - this has most likely failed. If under warranty it should be replaced. Mine was not, so I removed the circuit board and wired in a speed control unit and Vita-mix switches. A bit complicated for my level of techno-wizardry, but in the end much nicer than the touch-button panel. Good luck.
Cxo.

Posted on Dec 18, 2010

  • ccworsham Dec 18, 2010

    Mine too. There is a device on the circuit board called a 'rectifier' - this has most likely failed. It should be replaced under warranty. Mine was not, so I removed the circuit board and wired in a speed control unit and Vita-mix switches. A bit complicated for my level of techno-wizardry, but much nicer in the end. Good luck.
    Cxo.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Get a manual for blendtec ES3


i have blendtec blender model ES3 they have problem always showing overload?

Apr 06, 2012 | Blendtec Extra Carafe / Jar for the Total...

1 Answer

I have an ICB 3. The LED display lights up and when you touch the buttons it beeps but, it will not spin.


I called blendtec and got it figured out. The unit was in some locked mode and so I had to push the buttons 4-1-3 in that order to get it to work. The confusing thing is there's two invisible buttons between 1,2 and low, high. So the buttons go 1, 2, 3(invisible), 4(invisible), 5 (low), 6 (high). It mentions these options in the manual on page 18.

Jun 25, 2011 | Blendtec ABC Work Top Blender

1 Answer

Where can I find an owners manual


Hi, Go to this website: http://commercial.blendtec.com/Product/EZ/ez
Then open the "videos and resources" tab at the bottom. You'll be able to download a PDF of the manual for the EZ-Blender.
Best,
S

Mar 16, 2011 | Blendtec EZ-Blender Work Top

2 Answers

Blendtec replacement jar


You can also go to http://veggiesensations.com to buy blendtec total blender parts. Hope this helps!

Jun 30, 2010 | Blendtec Extra Carafe / Jar for the Total...

1 Answer

How to change the blade


You can't. The Jars have perfectly balanced blades that cannot be changed. A replacement jar from Blendtec is cheaper than a replacement blade assembly from other manufacturers. 1-800-253-6383 is the customer service number.

Jun 04, 2010 | Blendtec Smoother Work Top Blender

1 Answer

The rubber washer in the jar burned up


Happens occasionally. Call blendtec and they can hook you up if it is still under warranty. 801-222-0888.

May 19, 2010 | Blendtec Extra Carafe / Jar for the Total...

2 Answers

BLENDTEC BLENDER WONT WORK WATCH DOG TIME OUT?


That is a motor issue, you need to contact Blendtec customer service. They will let you know if it is still under warranty. 1-800253-6383.

Oct 31, 2009 | Blendtec HP-611-FLP / HP-621-FLP Work Top...

1 Answer

Blendtec blender jug split


I wouldn't fix the jar, just buy a new one. A crack, though rare, could possibly harbor bacteria. You could try using heat and melting it, but it wouldn't work as well. Your jar may still be under warranty, call Blendtec at 801-222-0888

Feb 24, 2009 | Blendtec Extra Carafe / Jar for the Total...

1 Answer

Lost manual


Call 1-800-blendtec and they can email you a manual. I have a pdf version if you need it.

Aug 22, 2007 | Blendtec BD4 Blender

Not finding what you are looking for?
Blendtec Extra Carafe / Jar for the  Total Blender (Blend-Tec) Blender Logo

Related Topics:

1,197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blendtec Blenders Experts

eyecam

Level 2 Expert

87 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Ross Keen

Level 3 Expert

1231 Answers

Are you a Blendtec Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...