Question about Xerox 6180MFP/N Printer

1 Answer

Phaser 6180MFP has error code 133-290 how to correct, and what is it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

Hi, the error code you mention suggests you are able to print a start page but still the error is constantly displayed on the device.
This error is related to a failure on the Fax module, originated by a possible corrupted job on the device memory.
3 Ways to solve this.

  1. Unplug the device from the power cord and leave it for around 10 minutes. Then plug the power cord back on. This will allow the memory to clean.
  2. Clean the memory. Before you do that print a configuration report to ensure you keep all configuration data, such as network information. On the front panel navigate to System > Admin Menu >Maintenance > Initialize NVM. Be aware this procedure might erase your network configuration. therefore is important to print the configuration report previously
  3. The same steps taken in Step2 will be required but done on a Diagnostic menu. For this I would advise you to contact Xerox to get an onsite visit.
Hope this helps. Regards,

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does this error mean when I'm trying to scan to email on our Phaser 6180MFP? Error 016-506


Failed to login to the SMTP server. Use CentreWare IS to verify that the user name and password settings are correct.

Mar 23, 2015 | Office Equipment & Supplies

1 Answer

Will not print in color


You can find answers to your Xerox questions at www.xerox.com/support

If the machine will copy in color it should print in color.
After verifying that it will copy in color, verify your driver is capable of being switched from black and white to color. If there are no color settings then you have the wrong driver. The link above will take you to the support page where you can download new drivers.

Mar 26, 2013 | XEROX MULTIFUNCTIONS Xerox Phaser...

1 Answer

ERROR 016-782 XEROX 6180MFP with windows7.


While there is no specific download for Win7 for this KB, you could try one of the others:

http://support.microsoft.com/kb/916846

Sep 21, 2011 | Xerox Phaser 6180N Laser Printer

1 Answer

I have error on my Xerox Phaser 6180MFP: 116-324 I have unplugged , restarted, checked all connections...help?


116-324: Controller Error (Illegal Exception)

To access Service Mode, press Up and Down Arrows at power ON.
Go to EEPROM Test

EEPROM Test
? Start
? Processing
? Check OK
Performs write/read/verification of the test patterns (0xff, 0xaa, 0x55, and 0x00) on one byte at every 0x400 from the first address of EEPROM.

Sep 14, 2011 | Xerox Office Equipment & Supplies

1 Answer

I have a Xerox Phaser 6180MFP and when I print #10 standard envelopes and #9 renturn envelopes the envelopes come out with badly pressed wrinkles on the end of the envelope that comes out last. I have...


I am looking for a diagram on how to print envelopes with my phaser 6180 mfp - when I put the envelopes in, it keeps telling me that I need to put paper in. where can I find such diagram?

May 21, 2010 | Xerox Phaser 6180N Laser Printer

2 Answers

My phaser 6180 transfer life repalce soon what is


If your Xerox Phaser 6180, 6180mfp, 6280, or 6280mfp is displaying "Replace Transfer Unit" or "Ready transfer Unit Life" you most likely need to replace the transfer unit.
For the 6180 and 6180mfp the part number is 675K47088. For the 6280 and 6280mfp the part number is 675K70583.Here is a video that shows you how to replace this part. It is very easy and requires no tools.

Mar 30, 2010 | Xerox Phaser 6180N Laser Printer

2 Answers

Xerox Phaser 6180MFP i have replaced toners


There are a couple of possibilities here.

Is the printer on a 'page pack' contract ?


Are the toners really chipped for the printer you have ?
There are 8 printers (including the multifunction variants as yours is) that take a SIMILAR cartridge.

They vary in capacity and chip. Some remanufacturers don't realise and have been sening out cartidges for these with the wrong chip fitted.

There has also been a bad batch of chips (a while ago now).

The solution is quuite simple, contact your supplier tell them what the problem is (error message etc) and they should be able to check the cartridge in their test printer (a GOOD remanufacturer will have a test printer for each of the cartridges they produce - how could they test their product otherwise !!).

Oct 09, 2009 | Xerox 6180MFP/D Printer

Not finding what you are looking for?
Xerox 6180MFP/N Printer Logo

828 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...