Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpoo? duet displays F11 and F dl alternatively

The unplugging and replugging is something I can try? It could harm the machine?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

F11 IS A COMMUNICATION ERROR BETWEEN THE DOOR LOCK ASSEMBLY AND THE MAIN PROCESSING BOARD THIS HAS BECOME A COMMON ISSUES WITH THE DUET WM THAT WERE MADE BETWEEN 2003 TO 2006. THERE IS A HAIR LINE CRACK IN THE MAIN BOARD THAT IS CAUSING THIS ISSUE. MFG SUGGEST CHANGING THE MAIN BOARD AND THE DOOR LOCK ASSEMBLY

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F11 code on a whirlpoos duet washer model GHW9150PW1. I replaced the CCU and still have the same problem. When I run a diagnostic test at the C01 stage is when the F11 error appears. Any help would be...


Might be a wire broken from vibrations or the MCU itself.
I have a service manual for you. Use the manual to reference repairs and your machine's tech sheet for error codes. This is your F-11 error from your tech sheet:
F11 Serial communication error
Communication between the Central Control Unit (CCU) and the
Motor Control Unit (MCU) cannot be sent correctly.
Possible causes/procedure:
1. Unplug washer or disconnect power.
2. Check wire harness connections to the MCU, the motor, and
Central Control Unit (CCU).
3. Check the drive system for any worn or failed components.
4. Plug in washer or reconnect power.
5. Verify CCU operation by running a Diagnostic test or any
cycle.
6. Check the MCU by looking for operations of the drive motor.
7. Check the drive motor for powered rotations.
8. Check that the serial harness at the MCU is not mounted
upside down. The wires should be to the left when facing the
MCU connectors.
themobilian_1436.jpg

I have some more photos and repair manual for duet sport model HERE

themobilian_1437.jpg

Feb 11, 2011 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

I keeg getting the dreaded F11 anf DL code!


Hi,
The following list of codes indicates an electronics communication problem with the washer:

Duet HT® washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99
Duet® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33
PLACEHOLDER FOR ART
To remove the error display, press Pause/Cancel twice.
If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, then call for service.

Take care

Jun 22, 2010 | Whirlpool GHW9400 Front Load Washer

1 Answer

F35 code


Hi,
The following list of codes indicates an electronics communication problem with the washer:

Duet HT® washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99
Duet® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33

To remove the error display, press Pause/Cancel twice.

If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

Take care

Jun 15, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F11 and/or dl code on a whirlpool duet front load washer


F11 is:
Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
Check for:
Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
Check the Drive system for any worn or failed components
Check MCU
Check CCU
Check Motor
Check Wire Harness

http://www.fixya.com/support/r666194-f11_error_whirpool_duet_kenmore_elite

Check the above link for a detailed article about the f11 error code.
Courtesy:JSrock

Apr 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front load washer displays error f did what the manual says but still same problem


it shows f11,also DL,
I did change the door lock,
same alarms.

it's fine for few wash but when it happens again it just stop and show
F11.

Mar 28, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The washer beeps and flases f dl


it probably flashes also f11....to correct that problem , you must replace CCU board (upper board) and latch assembly...

F11: CCU board
FDL: latch problem

Jul 03, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

F dL symbol on Whirlpool duet HT


It is saying there is a problem with your door Lock. when you close the door does it hold like it use too? try to open and close the door if it doesn't really close properly then you will just need a door latch. If the machine gives you an f11 code then its the main computer board that can also give your the door lock error. I would check the door first though.

Jan 09, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

1 Answer

Whirlpool duet wahsher


The following list of codes indicates an electronics communication problem with the washer:
Duet HT® washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99
Duet® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33
PLACEHOLDER FOR ART
To remove the error display, press Pause/Cancel twice.
If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, then call for service.

please do not forget to rate and comment about your experience with fixya today.

Aug 18, 2008 | Whirlpool Washing Machines

1 Answer

Whirlpool Duet Washer GHW9150PWO Have F11 and DL errors. Have replaced the door lock 2 x and still have same error messages.


Well du is a door lock error but it can also mean an error with communication to the main control board or ccu. f11 is also a communication error in either the ccu or the mcu ( motor control board)......easiest thing to try is to unplug all your connections to the ccu and plug them back in and try it again.....sometimes a wire harness just may be loose....if that dosent work I would look at replacing the ccu ( central control unit )

Jul 28, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My whirlpool duet is giving me a dl error or F11. The door will not unlock and my clothes are stuck in the washer.


F11 is a communications error between the main control board and the motor control board. You can first try to unplug the washer for a few minutes. Plug it back in and see if it will reset. If not one of the two control boards may be bad. Another thing you can try is to unplug all the wiring harnesses on both boards and plug them back in. It could just be a loose harness. The main control board is under the top panel in the back. The motor control board is behind the bottom panel on the left.

Apr 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...