Question about Systemax AOL Optimized PC (100607) PC Desktop

1 Answer

Systemax AOL Optimized

My pc once turned on just continues to restart over and over
and when I press "f10" it goes to CMOS setup and does not turn off
can still be a power supply problem ?
or what do I press for a destructive sytem restore?
really need your help!
thank you

Posted by on

  • Anonymous Apr 23, 2009

    When I turn the computer on, the screen will say, starting up... and then the computer shuts off, and automatically turns back on again. The process keeps repeating itself.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

DOES YOUR HARDISK DRIVE DETECTED?IF NOT, TRY TO DISCONNECT IT FROM THE SYSTEM ,TURN OFF YOUR PC,POWER ON, PRESS F10 AND OPTIMIZE DEFAULT SETTING, SAVE IT.TYURN YOUR PC OFF CONNECT THE HARDISK,IF IT DETECTED, AND NO WINDOWS APPEAR,REFORMAT YOUR SYSTEM.

Posted on May 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get into setup when starting up computer it is a presario sr 1000 desktop


Restart your computer
During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key
this will vary depending on your computer and operating system

Press and hold that key during the boot up process to enter BIOS
the using arrow key scroll down to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to cmos to restart

or

using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart




hope this helps

Jul 29, 2012 | Compaq Computers & Internet

1 Answer

When goes to boot up the screen goes black


turn on your pc, press F2 or del. find the boot order, set your hard drive as your first boot priority order. press F10 and then save. hope this will help... good luck

Jun 14, 2012 | Systemax AOL Optimized PC (100607) PC...

1 Answer

How to reset my motherboard - dg35ec intel


Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

Hope this helps

Apr 26, 2011 | Intel DG35EC Motherboard

1 Answer

How to reset my computer


During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

Hope this helps

Mar 25, 2011 | Computers & Internet

1 Answer

When i start the laptop, i want to go in to the setup. however when i press F2, it ask you to insert password.


Here are a few things you can do or try

Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally.

Alternate:

From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT. Click Restart when prompted. Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

Hope this helps don

Feb 26, 2011 | Computers & Internet

1 Answer

It has a blue screen doesnot do anything


Here are a few things you can do or try

Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally.

Alternate:

From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT.

Click Restart when prompted.

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer)

or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart


click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart



Hope this helps don't forget to vote


Feb 23, 2011 | Computers & Internet

2 Answers

I need to restore my factory settings and reboot my samsung n150 notebook how do i do it please


Here are a few things you can do or try

Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally.

Alternate:

From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT.

Click Restart when prompted.

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer)

or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart


click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart




Hope this helps don't forget to vote


Feb 23, 2011 | Computers & Internet

1 Answer

How do i get back to factory setings keep geting


Here are a few things you can do or try

Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally.

Alternate:

From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT.

Click Restart when prompted.

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer)

or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart


click start all programs accessories scroll to system tools from there you should see a system restore click next a sytem date should open up select the date you want to restore your computer to or if you want a full factory restore or

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or

During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart




Hope this helps don't forget to vote


Feb 21, 2011 | Gateway Computers & Internet

1 Answer

I have aol optimized pc how do you made your boot from cdrom Operating SystemMicrosoft Windows XP Home EditionForm FactorMini TowerProcessorIntel Celeron 1.7 GHzInstalled Memory256 MB (DDR SDRAM)Display17...


restart the computer. before it starts windows on the bottom left of the screen it will say press f1 or f2 to setup. press it. go into the boot configuration and set your first boot device to cdrom. then press f10 to save. insert the xp disc and restart the computer. when it restarts it should say press any key to boot from cd. just press any key and it will start on its own.

May 11, 2010 | Systemax AOL Optimized PC (100607) PC...

2 Answers

AOL Optimized PC - desktop acting odd


Hi I'm not sure how to change it but I have a suggestion that might work. Here are the steps to try: Go to START then RUN type in msconfig In the next window that pops up, select STARTUP tab Check in there and see if any startup item belongs to aol. Uncheck all those belonging to aol. Click apply, then click Close. It will ask to restart. Click on restart and see if it still happens when it loads up windows again. Good Luck Lolita

May 14, 2007 | Systemax AOL Optimized PC (100607) PC...

Not finding what you are looking for?
Systemax AOL Optimized PC (100607) PC Desktop Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Systemax Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Systemax Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...