Question about IBM Infoprint 1332 Laser Printer

1 Answer

IBM 1332 printer error #241 Paper jam - IBM Infoprint 1332 Laser Printer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Fixing a printer paper jam
When working with any printer it's inevitable that you'll encounter a paper jam. Below are the steps you'll want to follow when this occurs.

  1. Turn off the printer.
  2. Inspect the location or tray the printed paper ejects to. If the stuck paper is visible manually remove it.*
  3. Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it.*
  4. Open the printer door that allows you access to the printer ink cartridges or toner and look for any stuck paper. If the stuck paper is visible manually remove it.*
  5. Turn the printer back on. If you continue to receive a printer jam error try repeating the above steps again. If issue still persist and you see no paper that is stuck in the printer it's likely your printer is experiencing another hardware issues and we suggest contacting the printer manufacturer for additional assistance and/or repair.

* To manually remove paper pull on the paper with both hands being careful not to tear the paper while pulling it. If you're unable to get to an edge of the paper that allows you to pull it you may need to manually rotate the gears that feed the paper through the printer.

Preventing a printer paper jam
As mentioned earlier it is inevitable that you will encounter at least one paper jam during the life of your printer. However, if you're encountering frequent paper jams following the below steps can help prevent paper jams from occurring.

  • If your printer has a paper tray do not fill the tray to capacity. If you're encountering frequent paper jams reduce the amount of paper you place in the tray each time it is filled.
  • Make sure you or the tray feeding the paper into the printer is aligned properly and/or the slider used to hold the paper in place in the tray is snug with the paper. Many printers have sliders that allow different types and sizes of paper to be fed into the printer. If the slider is not properly positioned it can cause paper jams.
  • Use standard office paper; folded paper, paper with labels, and specialty paper such as hard bound paper can often cause paper jams. If you're uncertain with what type of paper you should use with your printer your printer documentation will list the types of paper compatible with your printer.
  • Do not mix the types of paper you're feeding into the printer at one time. If you need to change the type of paper or size of paper being used removed any other paper currently in the printer before inserting the new paper.
  • Examine the printer for any previous stuck paper in the printer. Previous paper jams, torn paper, printing labels or other foreign objects in the printer can cause reoccurring printer jams.

Posted on Oct 04, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: IBM Infoprint 1332 paper jam

one of the paper path sensors is blocked. check underneath tonner check if the sensor is playing freely.

Posted on Apr 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Constant paper jams


Open the printer and with a blower clean it thoroughly.
This resolves the paper jam issue many times.

Nov 16, 2011 | IBM Infoprint 1332 Laser Printer

2 Answers

241 paper jam message


Lexmark T630 241 paper jam message - Indicates a paper jam from the pull down manual feed tray.


If you check to make sure and small fragments of paper are not hindering the operation of the switch. The switch is located on the left side of the tray and will be spring loaded. The switch should move freely without binding. Make sure no toner or dust is on the optical sensor assembly. See Diagram for location.



prefab_8.jpg

If the switch seems OK and the printer still reports an error, the printer will require professional care.

Jan 15, 2011 | Lexmark T630 Laser Printer

2 Answers

Hello I am getting a paper jam error #241 "check paper tray 1 "


DEAR SIR,
Some print media, although they may conform to size and weight specifications, may not perform to your expectations. Print quality, jam rates, fuser life, and output stacking can be affected by the printing environment (temperature and humidity) and characteristics of the paper (structure, moisture content, smoothness or thickness);
Duplex printing is not supporteD
Using Auxiliary tray is recommended

HOPE THIS HELPS....

Thank you sir,take care

Oct 04, 2010 | IBM Infoprint 1332 Laser Printer

1 Answer

How many pages per minute on a InfoPrint 1332


The InfoPrint 1332 has a maximum output speed of 35 pages per minute. This speed can be less if you are using thicker paper or paper that's not 8.5" x 11", and other factors can affect the speed as well.

Apr 14, 2010 | IBM Infoprint 1332 Laser Printer

1 Answer

What is this ??


Typically there is a piece of paper caught in the fuser exit. If no paper evident(ie paper feeds cleanly, stops 1 inch past fuser) verify there are 2 sensor exit flags present and free to move. Occasionally 1 of the flags gets broken off the sensor causing this jam.

Jan 27, 2010 | IBM Infoprint 1332 Laser Printer

1 Answer

Paper sticks when coming out of shoot


Yes it might be the problem due to some dust or jamming in the Roller which moves the paper out..

It needs servicing.. if you are able to clean it internally then good.. otherwise contact to nearby service / or Repair shop.

Have a nice day
Scott

Apr 27, 2009 | IBM Infoprint 1332 Laser Printer

1 Answer

Paper jam


disconnect the power and usb cable from the back of the printer and press and hold down the power button for 30 sec and then reconnect the cables and try again...open the backdoor and try to move the rollers in upward direction.Make sure the unit is connected directly to the walljack.

Nov 28, 2008 | IBM Infoprint 1332 Laser Printer

1 Answer

Optra 2450 error 241


24X Paper Jam message displays, Paper jammed over the Pass
Thru Sensor. (The printer displays the value of X for the paper tray
where the error occurs. Example: 241 is a Paper Jam Tray 1)

That is a quote directly from the service manual. You have a paper jam, or some tiny bits of paper stuck over the pass thru sensor. Remove debris and clean out to fix your problem.

Thanks and please take a moment to rate as fixya.

Nov 10, 2008 | Lexmark Optra S 2450 Laser Printer

2 Answers

IBM Infoprint 1332 paper jam


one of the paper path sensors is blocked. check underneath tonner check if the sensor is playing freely.

Aug 19, 2008 | IBM Infoprint 1332 Laser Printer

Not finding what you are looking for?
IBM Infoprint 1332 Laser Printer Logo

949 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

454 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Jim Keysor

Level 2 Expert

329 Answers

Are you an IBM Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...