Question about RIM BlackBerry Pearl 8100

2 Answers

Navman PiN 570 Booting Problem

I have a Navman PiN 570 GPS Receiver it doesnt respond to power on/off button it only powers up by moving Hard Reset Switch to right then freezes saying navman in top left corner and SmartST in bottom right corner, download img appears if i hold poer button n flick hard reset also if i plug the sync / charger usb cable into the pc, then a new device is found, but drivers or software cant be found for it on the supplied CD's or the microsoft site.The new device comes up as SEC S3c2410x Test B/D

microsoft active sync is installed off the cd ontthe pc but it doesnt decect the navman when connected to the usb port.SmartST software doesnt see it either.Theres no info on the navman site that even relates to this

any help would be apprciated

Posted by on

  • 3 more comments 
  • Anonymous Jul 19, 2008

    SEC S3C2410X Test B/D driver

  • Anonymous Oct 23, 2008

    The device never show up, even it says devise found, but still i can't read this devise on my computer...:(

  • Anonymous Nov 02, 2008

    me too

  • khazi Dec 22, 2008

    i have the same problem,....i

  • jrmarinho Feb 15, 2009

    please i need a driver for SEC S3C2410X Test B/D someone can help me?


2 Answers

SEC S3C2410X Test B/D

Posted on Jul 19, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Please give your mail id i will send drivers

Posted on Nov 14, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to restore HTC One V T320e smartphone

Performing a factory reset using hardware buttons
If you can't turn HTC One V on or access settings, you can still perform a factory reset by using the hardware buttons on HTC One V.
1. Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
2. Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
3. Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.
[img title="unlock HTC ONE V hard reset forgotten password" alt="HTC ONE V hard reset" src="" height="350" width="180">
will remove any applications you've downloaded and installed. Be sure to back up
any data and files you want to keep before you do a factory reset.
Performing a factory reset from settings
1. Slide the Notifications panel open, and then tap Settings.
2. Tap Storage > Factory data reset.
3. Tap Reset phone, and then tap Erase everything.Performing a factory reset via settings
The most convenient way to do a factory reset is via the settings.
1. From the Home screen, press MENU, and then tap Settings.
2. Tap SD & phone storage > Factory data reset.
3. Tap Reset phone, and then tap Erase everything.

HTC One V not responding?
If HTC One V frozen and does not respond when you touch the screen or press the buttons, you can still restart it by press and hold the POWER button for at least 10 seconds, and then release it. HTC One V then restarts.

Sep 26, 2013 | HTC One V T320e - 4gb - Grey Unlocked...

3 Answers

Will not fire up a gps signal

Most GPS systems require a first time boot-up where they scan all registered satellites to determine where in the world they are and what satellites to concentrate their navigational efforts on. Try charging the GPS up entirely, and then doing a hard reset of the system (either by navigating to the hard reset in software or by pressing the tiny reset button usually located on GPS units), and then taking the system out under the open sky and letting it run for half an hour or so, making sure it is running in navigation mode (as opposed to setup or media mode). Once it locks properly onto a small subset of satellites, it should not have much difficulty.
If you continue having problems, check to be certain you are running the latest software on the device which can make a big difference. The latest software for the 520 is here:

Good luck...

Nov 21, 2007 | Fujitsu Siemens Pocket Loox N520 Pocket PC

1 Answer

I keep giving the wrong passworb

You have two options, you can attempt to reset the password which varies by model or you may need to do a hard reset which is usually executed by holding the power button and using the stylus to tap on the button located on the bottom, a small pin should also work. If you can respond with the model number I'll see if I can find a better solution that doesn't involve a data wipe.

Aug 15, 2013 | i-mate Computers & Internet

1 Answer

How do I do a hard reset?

Remember that when you hard-reset, all of your personalization and information will be deleted. Here are the steps:
  1. Press the POWER button
  2. KEEP holding the Power button down, use the stylus pin to gently press and release the Reset button (on the back in the middle of the device) - don't take your finger off the Power button
  3. When the "palm powered" screen is displayed, release the Power button after 3 seconds.
  4. You'll receive a warning message that you are about to delete everything
  5. Press the Scroll button (bottom and center of the device with the triangle symbol on it.
You have now officially hard reset the system and you will need to go through the initialization process again.

Feb 08, 2011 | Sony CLIE PEG-SJ22 Handheld

2 Answers

Phone Not Booting up.

By hard reset you can solve this problem.
for hard reset just remove battery and put it back press and hold cam and call button then press power key.

May 31, 2010 | i-mate PDAL Pocket PC

2 Answers

Changed pin # for locking/unlocking dell axim x51v dont know it

You'll have to hard reset your device, in ordere to get past the password request phase. You, most probably, know that a hard reset will restore your device to its factory defaults, thus deleting all the programs you have installed, as well as your personal data and settings.
Anyway, to hard reset your devcie, press the Power button to turn it on. Then, press and hold the Power button, and, whilst keeping it pressed, press the reset pin with the stylus pen. Release the buttons. A screen asking for confirmation will come up. Confirm the hard reset procedure by pressing the Contacts button (or cancel it by pressing the Mail button).
By the way, if you happen to miss your device's user guide, you can download it from this location.
Hope it works for you.
Regards, Carlos

May 21, 2010 | Dell Axim X51v Pocket PC

2 Answers

How do you fix a touch screen that does not respond? I have done a complete reset and still nothing. Thanks.

Have you already performed a clean reset? You might know that it will restore your device to its factory settings, thus deleting everything you have installed, as well as your personal data and settings. So, it is strongly recommended to backup your data beforehand.
Anyway, to perform a clean reset, press and hold the Calendar, Power, and Messaging buttons, and, whilst keeping them pressed, press and hold the reset pin with the stylus pen. When your device restarts, release the buttons and the stylus pen from the reset pin.
Hope it works for you.
Cheers! Carlos

May 12, 2010 | HP iPAQ hx2410 Pocket PC

2 Answers

I have a sidekick and when i changed it to spanish, now doesnt do anything at all it powers on and the rolling ball doesnt work and doesnt responds to anything, anyone knows something ?!

You may need to perform a Master Reset. This will fully restore your phone to it's factory settings.

To do this, remove your SIM card and follow these directions:

1) Flip the screen as if your about to close it.

2) On the upper right hand side look closely. You will see a little arrow pointing to a small circle.

3) Push in the circle with a paperclip and at the same time hold down the power button.

4) Remember to push both at the same time and keep them pushed in until the phone turns off.

5) Once the phone turns off you have done the hard reset successfully.

6) Then, turn your phone back on normally.

Apr 01, 2010 | Sharp Sidekick LX Smartphone

2 Answers

Navman gps device

Just press the turn on button for 10 sec

Apr 02, 2008 | Sony Ericsson K800i Cellular Phone

1 Answer

Navman pin 570 pocket pc will not charge

It is likely your battery is depleted or it can also be an unlikely flaw in the firmware.

To eliminate the firmware flaw, restore (flash) the entire firmware using a downloaded version from the site or an upgrade of the OS and or GPS app which will likely include an entirely new firmware.

Since your battery isn't retaining a charge, this operation should be performed from a PC demonstrated to provide power to the PiN 570 and or a reliable power strip on a UPS if you're using the split AC/USB cable.

A device subjected to a power interruption during a firmware flash can become permanently ruined or cost ineffective to recover.

Mar 22, 2008 | Computers & Internet

Not finding what you are looking for?
RIM BlackBerry  Pearl  8100 Logo

834 people viewed this question

Ask a Question

Usually answered in minutes!

Top RIM Computers & Internet Experts

Andrew Wright

Level 2 Expert

117 Answers


Level 2 Expert

173 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Are you a RIM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides