Question about Canon BubbleJet i9950 InkJet Photo Printer

Open Question

Canon i9950 error 5 orange flashes followed by 1 green flash. tried the reset procedure and it does not work. where can I get a copy of the procedure to remove printhead to clean? mornae

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 48 Answers

SOURCE: Canon i9950

Yes, the flashing light on start-up is actually the Waste Ink pad is full
a Canon tech suggests that the job is very difficult (unfortunately even for them)
HOWEVER....
good news is that you can override it for awhile...

  • turn off power
  • press & hold RESUME button, then press POWER button
  • continue to hold POWER then release RESUME button
  • Press RESUME Button 2x quick
  • Release both RESUME and POWER
  • Green light will now blink, then stop
  • With Green light on....press RESUME 4x
  • Push Power button to turn printer off
this should resolve the issue
remember to rate the solutions...anything less than FIXYA actually lowers my rank...I didn't make the system...just wanting everyone to understand the impact of their vote....so if you need further help...just ask....hope it fixya'd...if it did then rate please!
bearb

Posted on Nov 15, 2008

Ad
  • 1 Answer

SOURCE: Canon i9950

Five flashes: Print head not installed / Print head not installed correctly / Defective print head
Install the print head. If the print head is already installed, remove the print head and check the electrical contacts for foreign matter, then reinstall.
For the i9950 ONLY: When the CD-R tray is set in the printer, remove the CD-R tray and set the paper output tray to the paper print position, then install the print head.
After reinstalling the print head, you may need to realign it.
If this error still remains, the print head may be damaged

Posted on Jun 23, 2008

  • 479 Answers

SOURCE: canon pixma ip1000 problem

you have to reset your printer


1. Unplug AC (and usb just for good measure)
2. Hold Start while plugging in...
3. While still holding Start press Resume twice.
4. This then allows for Removal of Ink Cartridges(if you are past the limit)... a very important step apparently.
5. Now repeat Step 1... Step 2
6. Now press the Resume 4 times (only blinks for 1st two presses !)
7. Should be ready...

Posted on Sep 26, 2008

  • 1602 Answers

SOURCE: Flashing orange lights

WASTE TANK NEEDS TO BE EMPTIED

GO ON LINE AND TYPE

CANON 850i INKJET PHOTO PRINTER 7 BLINKING LIGHT YELLOW

AND YOU CAN FIND YOUR HELP YOU NEED

ROD THE CANDYMANGNADY

Posted on Feb 04, 2009

  • 1 Answer

SOURCE: canon i9950 prints green on photo paper

I had the same problem. Having checked other websites I came across the following which narrowed down the problem to the Photo Cyan / Photo Magenta ink tanks, and replacing the Photo Magenta one (although it was not empty) has successfully resolved the problem. Eveidently ink from the original one was not flowing and so caused the syan cast. (I experimented by subsequently removing the Cyan one which produced prints with Magenta cast)

TEXT OF POST I FOUND:-

That post is labeled "Cannon (sic) S9000 Print Head" and concerns a greenish hue error in all print quality levels OTHER THAN plain paper. In other words, all output designated as Photo Paper Pro, Glossy, High Resolution Paper, etc., results in output with enormous and unacceptable levels of green hue. All output designated as "Plain Paper" whether the output actually is on plain paper or photo paper pro, turns out well.

This problem is not unique to the S9000, as I experienced it identically with the S820 and predictably can occur in any printer with the six cartridge print head.

It is a frustrating problem because you know that the printer is physically capable of printing WITHOUT the hue (as it proves to you each time you choose a "plain paper" paper setting.)

Troubleshooting by reinstalling and updating the printer drivers, and uninstalling/reinstalling the ZoomBrowser EX, replacing the ink cartridges, and deep cleaning are all blind alleys.

A call to Canon support solved the problem for me with this simple and important revelation:

The Plain Paper setting is unique in its use of only 4 of the 6 cartridges. In the Plain Paper setting, only the black, cyan, magenta and yellow cartridges are utilized. The Photo Magenta and Photo Cyan are not utilized. In all higher resolution settings, i.e., in all other settings, all 6 cartridges are utilized.

It follows that if one's problem disappears when not using these two Photo cartridges (i.e., when printing at the Plain Paper setting), then the problem lies with these cartridges.

(In my case, I'd loaded a plain "Cyan" cartridge in the "Photo Cyan" slot during earlier trouble shooting and had forgotten to replace it with the proper Photo Cyan cartridge.)

Problems with magenta hues would admit of the same solution.

Hope that helps anyone else out there tearing out their hair trying to troubleshoot this. "

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I reset the EEPROM of a canon print head?


Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.

you done.

Aug 14, 2012 | Canon BubbleJet i9950 InkJet Photo Printer

1 Answer

Operator Error. 5 flashing amber lights followed by one flashing green light.


Try unplugging the power cord, letting it sit off for 30 seconds, then plugging it back in.

Apr 22, 2011 | Canon i9950 InkJet Printer

1 Answer

The orange error light is flashing 5 times in between the green light.


Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Jan 27, 2010 | Canon BubbleJet i560 InkJet Printer

1 Answer

Five flashes of orange followed by one green flesh


  1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the printer should turn off, if not, press the Power button once more.
  8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Jan 02, 2010 | Canon BubbleJet i9950 InkJet Photo Printer

1 Answer

S9000 printer will not print.


Hi
Try this see if work for you.

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Jan 13, 2009 | Canon i950 InkJet Photo Printer

1 Answer

Blinking orange 5 times and 1 green


Try this:
Most of the time when a printer used for a certain period the ink would dry out and caused an error message. What you do is to replace with a new inks pad inside the printer and reset that error message. Once it is done, your printer will work again!

For Printer Model: Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000:

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Please remember to rate all Techs who assist you for free :)

Oct 04, 2008 | Canon BubbleJet i560 InkJet Printer

2 Answers

CANON PIXMA MP150


Error E/2/7 Solution=waste ink basket
Mp150
Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Sep 03, 2007 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

Service manual vanon i9950


1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power
button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power
and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights
alternately in orange and green, starting with orange.)
4) When the LED lights in green, press the Resume/Cancel button the specified number of time(s)
according to the function listed in the table below. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in either orange or green, starting with orange.)
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu
selection mode automatically.)
Time(s) LED
Function
Remarks
0 times Green Power off When the print head is not installed, the carriage
returns and locks in the home position.
1 time Orange Service test print See Section 3.5 Verification Items, (1) Service test
print.
2 times Green EEPROM information print See Section 3.5 Verification Items, (2) EEPROM
information print.
3 times Orange EEPROM initialization
4 times Green Waste ink counter resetting
5 times Orange Destination settings After performing step 5), and follow the Destination
settings procedures.
6 times Green Print head deep cleaning
7 times Orange Media sensor correction After performing step 5), and follow the Media sensor
correction procedures.
8 times Green CD-R test print Not used in servicing
9 times Orange CD-R print position
correction (horizontal)
Not used in servicing
10 times Green CD-R print position
correction (vertical)
Not used in servicing
11 times
or more
Return to the menu selection

For full Service manual I've uploaded it here:
http://www.megaupload.com/?d=BLC9L7OU

Mar 24, 2007 | Canon BubbleJet i9950 InkJet Photo Printer

Not finding what you are looking for?
Canon BubbleJet i9950 InkJet Photo Printer Logo

Related Topics:

1,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2005 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...