Question about Portable Televisions

1 Answer

Maxim tv I have a universal remote control and was wondering if you are able to provide me with a code for a maxim 11-36 tv so i am able to operate said tv via the universal control. Regards Gillian.

Posted by on

1 Answer

Apparently some tv's are made with parts from other makes... for example a sony will use parts from toshiba.. if you can find out or know if Maxim are using any other parts and know what other make ..then i can tell you

in summary: you may need a code for a DIFFERENT model tv.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need universal remote control tv codes


If you have a universal remote control, you can use its code search feature to try to find a code that works. If you search through allcodes stored in the remote without success, you may have to try another universal remote. Different remotes may have different codes.

Mar 14, 2015 | Axion AXN-8701 7 in. Portable TV

1 Answer

Not able to tune


Mostly likely you can purchase a "universal" remote control to replace the missing remote control. You didn't provide the make or model of the TV, but this works 99% of the time.

Feb 21, 2014 | Portable Televisions

1 Answer

LACK OF CODE PORTABLE TV WITH DECK FOR UNIVERSAL REMOTE CONTROL


Hello
Three digit remote code for GE TVs are:-

000/ 003/ 004/ 009/ 022/ 031/ 044/ 052/ 054/ 055/ 087/ 092/ 103/ 107/ 125/ 164/ 181

Four digit universal remote code for GE TVs are:-

0031 0107 0164 0004 0009 0044 0054 0000 0342 0003 0125 0015 0022 0052 0087

Four digit universal remote code for GE TV/VCR Combo is
0342
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Dec 04, 2010 | GE SpaceMaker 05GP009 Television

1 Answer

Sylvania 15 inch digital/analog LCD TV HDTV. Once


try doing the auto search method on the cable remote. sometimes this works when the codes do not. if it doesn't then it is what it is.

Jun 26, 2010 | Portable Televisions

3 Answers

Find eGear by Target tv remote codes


need code for e gear tv for remote

Nov 13, 2009 | Portable Televisions

2 Answers

Set up for universal remote not working


I have a phillips remote tv controller universal. I lost my papers so I need to have the codes to use in my magnavox tv. Please send me the codes. Thank you.

Dec 10, 2008 | Portable Televisions

1 Answer

Tv remote doesnt work on tv


Not all Philips TVs use the same remote codes.
It is very unlikely that the TV remote receiver is the problem (trust me).
Is this the original remote for that set?
If not, try program it as a universal with the other Philips codes or get a universal remote and do the same.
Here is the website for remote codes:
www.remotecodelist.com/remotes/

Jan 02, 2008 | PROimage PRO IMAGE 5" BLACK&WHITE TV...

9 Answers

Universal Remote Code for Dynex 20" TV/DVD


I just bought a 32" dynex lcd and saw that i couldn't program my two $5 ge remotes to work it. From reading in this forum and others I'm not the only one with the problem, I thought I was stuck with only the dynex remote. But the dynex website tells you how to get universal remotes to work,
It tells you to try the codes for Orion, Emerson, Memorex, Sansui, Sylvania, Zenith. The second orion code worked for me. both my ge remotes look and work the same but one uses a four digit code and the other uses a three digit code. I used 0135 on one and 135 on the other. There is a good chance that if you try the codes for the brands dynex lists you will find one that works. The 0135 or 135 might work for most dynex tv's.
If you have a ge remote and haven't programmed it for volume punch through you might try it. It allows the tv volume to be controlled using the ge remote even when it's set to something other than tv.

Nov 04, 2007 | Portable Televisions

Not finding what you are looking for?
Portable Televisions Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Portable Televisions Experts

Blake

Level 2 Expert

136 Answers

The Knight
The Knight

Level 3 Expert

68180 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Portable Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...