Question about Sony Cyber-shot DSC-S700 Digital Camera

3 Answers

Lence problem lence got struck

Posted by on

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    Hello anuhydin,

    If lens looks tilted, then your camera dropped. Kindlt let me know.

×

3 Answers

Yes, my camera dropped from my hand

Posted on Jun 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

What is SWAP policy? Where it is aplicable?

Posted on May 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Lens of this camera is not available This camera is in SWAP policy. Submit this camera in any sony service network. If warranty is valid than no cost will charge and successer model will issue you like DSC-S750

Posted on May 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lence do not open


The non-functioning of the camera can be a fault in the shutter, zoom or auto focus sections and may be due to the failure of the Main control system or the drive. A simple was is to reset and we can try by removing the battery and card for some time. Now replace only the battery and while switching power ON, tap the lens hood on the palm of your hands so as to disengage any dirt or mechanism being struck. You can spray a degreasing spray on the lens hood sides and also assist the lens as it tries to come out, attempt to pull it out slowly while powering ON the camera. Also in some cases you can slid a thin film/paper on the lens hood sides to wipe out any dirt .

Tips to open and check for common faults:

http://www.youtube.com/watch?v=v2Mj3Qp3xYU&feature=related
Use some air to blow between the lens to dislodge any sand particles struck inside. Unless you are familiar with handling of small devices must the camera be opened. If so check the voltage on the motor drive, check the auto focus and Zoom drives, it must be free with manual movement. If jammed the motor can be removed and released. If none of these works then you can think of taking consensus with the service centre.
Get estimate before you decide. It will be good to have it checked at the authorised service as you do not have to run around for spares.

Thank You for using Fixya


Sep 22, 2011 | FUJIFILM FinePix AV100 Digital Camera

1 Answer

Lence erro & restart camera


The lens error is due to failure of the lens control system. You can remove battery and card replace battery and while switching on tap the lens hood on your hands so as to disengage any dirt or mechanism being struck.
Use some air to blow between the lens to dislodge any sand particles struck inside. If none of these works then you can think of taking consensus with the service centre.
get estimate before you decide. It will be good to have it checked at the Canon service as you do not have to run around for spares.

Jun 14, 2011 | Canon PowerShot A480 Digital Camera

1 Answer

Nikon lence is not going inside , It showing lence error


ya even I hav d same problem..!! I dnt think its covered under warranty..u will have to pay d service charge.
Apurva ,Lucknow

Apr 28, 2010 | Nikon Coolpix S210 Digital Camera

1 Answer

Lence error


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Feb 16, 2010 | Casio Digital Cameras

1 Answer

Nikon d40x error saying "error: press shutter release button again"


check the lence is working properly then the focusin option is auto or manual the auto focus 18-55 lence is properly fixed on mount or not

Oct 18, 2009 | Nikon D40x Digital Camera

1 Answer

Outdoor images overexposed


hi, its a problem of lence flap,it is in the lence berral , just change the lence flap and your camera is ok,remember if you are a tecnition then try your owen

Aug 27, 2009 | Sony Cybershot DSC-T200 Digital Camera

2 Answers

Needs help


hi,if your leance could not open when you turn on camera so may be you must cheak the lence assembly breckeg , if the lence is open then servise lence unit and fix it properly,and the easy way is remove the lence unit and first remove moter from it and rolling well as possible.it must be smoth rolling between beralls of lence,then roll the moter alone well by using adapter about 5 volts,now fix it by aqurat ,you find a magic

Aug 25, 2009 | Canon PowerShot SD630 Digital ELPH / IXUS...

1 Answer

Lance alignment is disturbed


hi,if you are a tecnition then open yor camera and remove the lence assembly,then remove the motor and clean the lence unit properly ,and check that smothness between lence beralls, it must be rolling smothly ,and roll the moter by using adapter of 5 volts ,roll motor both side ,after that fix it properly ,now you can check it by put suply on motor and see what has be done,if lence responce smothly in and out then fix it with camera,and see the magic

Aug 25, 2009 | Nikon COOLPIX L10 Digital Camera

1 Answer

Lence Error in A580 Digicam-Canon


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Nov 30, 2008 | Canon Digital Rebel XTi 10.1MP Digital SLR...

Not finding what you are looking for?
Sony Cyber-shot  DSC-S700 Digital Camera Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Digital Cameras Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Sony Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...