Question about Husqvarna Chain Saw 20" Bar

1 Answer

I have a husqvarna 350 chain saw. i need a piston but cant figure out what year it was made. the model #9670188-00 could you tell me what year it is or the part # for the piston thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Husqvarna Master
  • 2,239 Answers

This is a product number not the serial number.

Posted on Jan 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Husqvarna chain saw not starting. Seems to have lost compression. What should the compression be?


If its lost compression i would remove the two/three screws holding the muffler, take a look through the exhaust port at the piston, if there is any sign of scuffing or damage it is going to be cylinder off.

Nov 21, 2010 | Husqvarna ChainSaw 18 in Bar 32 HP Model...

1 Answer

Can not determine model number from tag with serial number inscribed on it,,Need a chain brake for a model 350.....Read tag affixed to saw, I cannot find the model number on the web Info as follows --Husq...


Hello Jonathan;
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
05 0502886
05 = year produced – 2005 (single digit before 2000; please contact Husqvarna for single digit clarification
http://www.husqvarna.com/us/homeowner/support/customer-support/)
05 = week produced – Feb, 07 - 11
02886 = 2886th unit Husky produced that week

What I think is the best fit IPL for your saw follows.
http://weborder.husqvarna.com/order_static/doc/usa/2004/I04000/I0401092.pdf
Detail A
*Compl = 537 10 78-01
Internet search $50±

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Apr 13, 2010 | Husqvarna Garden

2 Answers

Muffler keeps vibrating off


On your saw it IS a problem. The Husqvarna 350 has a long history of this very problem. I recommend you contact a local Husqvarna dealer, there may a warranted repair, at the very least they have been dealing with problem long enough to know how to provide a long term repair.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 29, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

Husqvarna chain saw oiler problem


I fear you are correct about the oiler problem. I see a lot of oiler problems on these saws. Sooner or later Husky will have to address it. Ask the dealer about modifying your oiler; the 350 has an adjustable and might fit 1 or both of these saws. I think Husky needs to admit the nonadjustable is a mistake, and come up with a fix.

If you want to do some research start with the IPLs here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week
Please post back (below) with what happens at the dealer. Take your buddy and his saw with you! Good Luck. HTH
Lou
If Husky starts modifying all these with 350 oilers I want compensation...LOL

Feb 17, 2010 | Husqvarna 450 e-series 18" Chain Saw

2 Answers

Manual for 350 chain saw


Hello. Try this link to Ebay,I saw lots of them there. If the link don't work just go to Ebay.com and do a search for the manual. http://shop.ebay.com/?_from=R40&_trksid=p3984.m38.l1313&_nkw=husqvarna+350+manual&_sacat=See-All-Categoriests

Jan 12, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

How do you remove a drive sprocket from behind the clutch on a 350


Use this as a guide, yours is similar.
R² Drive Link Outboard Clutch by Drivelink.blogspot.com
http://www.youtube.com/watch?v=cdqkIuVNUQc
  1. Check the IPL for your saw to see if any special tools are needed.
  2. There are metal piston stops available, when square (almost never) with the piston top these work well, if not square they have been known to punch through the piston. I suggest a length of starter cord or nylon rope be used instead of the piston stop (retain 6" ± so you can remove it). Make sure the piston is near the top of the cylinder before feeding the cord or it can fall through the exhaust port and damage the piston as it rises.
  3. Everyone I have ever removed had a left handed thread (tighten it to loosen it).
    Let us know how it worked for you.
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week
HTH
Lou

Dec 20, 2009 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

I need to replace the chain sproket on my Hsuqvarna 345e chain sa


It has an out board clutch, please view this it is essentially the same.
R² Drive Link Outboard Clutch by Drivelink.blogspot.com
http://www.youtube.com/watch?v=cdqkIuVNUQc
  1. Check the IPL for your saw to see if any special tools are needed.
  2. There are metal piston stops available, when square (almost never) with the piston top these work well, if not square they have been known to punch through the piston. I suggest a length of starter cord or nylon rope be used instead of the piston stop (retain 6" ± so you can remove it). Make sure the piston is near the top of the cylinder before feeding the cord or it can fall through the exhaust port and damage the piston as it rises.
  3. Everyone I have ever removed had a left handed thread (tighten it to loosen it).
    Let us know how it worked for you.
IPL and operator's manual download
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week

You may find detail B beneficial. HTH
Lou

Dec 17, 2009 | Husqvarna Forest & Garden No.967012396 345...

1 Answer

I have a Husqvarna 445 chain saw and it does not get enough oil to the bar and chain. I have to stop saw after about 10 minutes of cutting because it freezes the chain so I remove bar and chain clean out...


Your Manual nor IPL mention an oiler adjustment..
445 IPL (may not be your saw)
Is this the original bar? A longer bar requires more oil and your saw is not equipped to supply it.
http://weborder.husqvarna.com/order_static/doc/USA/2007/I07000/I0701086.pdf
Detail B (Clutch/Drum/Oiler)
We are seeing many of these does not oil/oils to much problems with these no adjustment models. I recommend you contact Husqvarna, there may be an unannounced recall/repair. If they aren't willing to help you consider contacting your Atourney General and the BBB.
Contact Husqvarna here:
http://www.husqvarna.com/us/homeowner/support/customer-support/
It has an outboard clutch, the oil pump is behind it. If you attempt a repair this will be helpful.
R² Drive Link Outboard Clutch by Drivelink.blogspot.com
http://www.youtube.com/watch?v=cdqkIuVNUQc
  1. Check the IPL for your saw to see if any special tools are needed.
  2. There are metal piston stops available, when square (almost never) with the piston top these work well, if not square they have been known to punch through the piston. I suggest a length of starter cord or nylon rope be used instead of the piston stop (retain 6" ± so you can remove it). Make sure the piston is near the top of the cylinder before feeding the cord or it can fall through the exhaust port and damage the piston as it rises.
  3. Everyone I’ve ever removed had a left handed thread (tighten it to loosen it).
    Let us know how it worked for you.
Source for Manual and IPL:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – for use with IPL
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week

Nov 24, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

Cant figure out what year my saw is?


I think you have the model number. The first digit of the serial number is the year. If that is indeed the sn then it was made in 89 or 99.
sn 04 1800265 (04 - year) (18 - week) (00265 - 265th saw that week) pretty clever these Swedes.
Lou

Apr 19, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

Can't get it to start


what shop did you take it to.if you took it back to where you bought it from it could be anywhere.make sure the saw has comperssion.easyist way to tell if you have good compression you need to take the muffler off and look to see if the piston is scored.Call husqvarna hot line and they will give you the nearest husqvarna dealer to repair it correctly.

Oct 29, 2008 | Husqvarna Chain Saw 20" Bar

Not finding what you are looking for?
Husqvarna Chain Saw 20" Bar Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...