Question about Lexmark Office Equipment & Supplies

1 Answer

Trying to re-install software for X1100 series printer. Continually get the message, 'The printer cannot be installed successfully, unless it it connected correctly. 1. Check all the printer cables.....' etc. Obviously done that a million times!! Any ideas? Thanks.

Posted by on

  • John Kinlay May 28, 2008

    Templarius...thanks for your response. Now resolved initial problem, via Lexmark Support. For any other 'numpty' like me, here's the gist of their remedy:

    " Lexmark Support (LS) May I know the operating system on your computer?
    Me: Microsoft Windows XP
    LS: Okay, do you get any error message when you are trying to install the software?
    Me: No, just telling me printer not connected properly. Obviously checked all that
    LS: How did you try installing the software and is the software installed on the computer now?
    Me Tried installing via software that came with printer
    LS: Please insert the software disk in the computer and cancel the initial screen that might pop up. Then 1. Go to "Start", and right click on "My Computer".
    2. Click on "Properties".
    3. Click on "Hardware".
    4. Click on "Device Manager".
    5. Do you find any devices that show a "?", "!", or "X" against them? If so, please let me know which devices have those marks.

    Me: 'Other devices' and 'X1100 series'
    LS: Right click on it and left click on Update drivers. Then click on Install Software automatically and click Next.
    Me: Telling me software has not passed logo testing?
    LS: Click on Continue Anyway."
    And that was about it! Printer all fired up now, except pages are blank - another problem!
    Thanks again for your interest

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 83 Answers

Check did the cables goies on the right place........... let me know

Posted on May 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install my lexmark x1100 all in one printer without cd


First thing you need to do is uninstall the current software and printer.

Then go to: X1100 Series Driver

Select your operating system...Vista...from the drop down menu.

The next page has the link to download the driver. (It should be cjrX1100EN.exe. Click on "Download Now".

When you begin the download and the download window appears, select "Save" and direct the download to save to your desktop.

After the download is complete, close all the windows, or other programs.

Make sure your printer is ON but also that the USB cable is DISCONNECTED. Double-click the file on your desktop that you downloaded. When prompted by the software, connect your USB cable.

That should do it. If you run into any problems, just comment back.

Thanks for using Fixya.






Apr 04, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Printer installation


Try disconnecting the printer from the USP Port and re-install the software for the printer. When the software calls for the printer to be connected to the USB, then do so. I have found that most software programs haveto be installed with the printer not connected till told to do so. You may even have to uninstall the printer befor you reinstall the software program. Its worth a try. Bud

Jan 04, 2009 | Office Equipment & Supplies

1 Answer

Lexmark all in one printer don't install on vista. is there a patch


You may want to see if the Printer is actually compatible with Windows Vista first before you try anything else.

If your Printer is Listed Below, then unfortunately it will not run on your system unless you format the machine and downgrade to Windows XP. (Or obviously you can wait until the device is supported, but to be honest that could be months, years).

exmark
  • Lexmark Z11, Z12, Z22 & Z32, Z31, Z42, Z51, Z52 - work with pre-installed drivers
  • Lexmark Color Jet 3200, 5700 - work with pre-installed drivers
  • Lexmark X5400, X4200, X1200, Z645, Z840, Z730, X2400, X3400, P350, X7300, X8300, X9300
  • Lexmark X1100, Z500 & Z600 (combined), P4300, X3300, X2300, X7100, Z810, Z700, X5200, P6300, P910, P6200, X6100, X5100, X2200
  • Lexmark 1100, 1200, 2400, 3400, 4200, 5400 Series, Lexmark X7350, X8350, X9350, P350, Lexmark 640 Series, Lexmark 730 Series, Lexmark Z845[4]

Dec 04, 2008 | Laplink Software PCmover for PC

1 Answer

Lexmark x1100 series printer


you can get it here http://www.radarsync.com/software/s205764-lexmark_x1100_series just click on the download latest version box ( green with blue arrow ) on the right hand top

electech

Nov 27, 2008 | Office Equipment & Supplies

1 Answer

The Lexmart X1100 Series Printer drivers not installed please re install your printer driver or Missing or damaged Reinstall printer software?


sure..go to www.lexmark.com

get the new drivers by model number and operating system

remove the old ones first(add/remove programs)

install

try it


Also, more printer resources are here

Aug 21, 2008 | Lexmark Office Equipment & Supplies

3 Answers

Lexmark x1100 series all in one printer


Get on the internet, go to Lemark site they have a area for support, and download drivers place on a cd or down load to your desktop. When finished run the drivers and your printer should work. If you can find on lexmark site there are many other sites that have them. Just type Lexmark x1100 drivers and pick a site in your search engine. You should not have to buy them.. Good luck.

Jul 09, 2008 | Office Equipment & Supplies

1 Answer

FAX with my Lexmark X1150


you can find a complete .pdf guide thats easy to understand by clicking the link below !

Lexmark X1100 series User Guide.pdf

Worry not , the X1100 series should match your x1150 model installation procedure!

Whatever O/S you use , you can get the Lexmark drivers to match from the Lexmark downloads section for X1100 series below ( also links to other models as well !)

Lexmark X1150 drivers & downloads / Choose your O/S

Jun 02, 2008 | Lexmark X1150 All-In-One InkJet Printer

1 Answer

Printer installation


Hi Roger22

you can find a complete .pdf guide thats easy to understand by clicking the link below !

Lexmark X1100 series User Guide.pdf

Worry not , the X1100 series should match your x1150 model installation procedure!

Whatever O/S you use , you can get the Lexmark drivers to match from the Lexmark downloads section for X1100 series below ( also links to other models as well !)

Lexmark X1150 drivers & downloads / Choose your O/S

May 22, 2008 | Lexmark X1150 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...