Question about Bose Lifestyle 20 System

Open Question

PCM 2.0 My Bose 321 System shows PCM 2.0 when I watch TV (DirecTV). I have a friend that has the same system and his display reads "Dolby Digital 5.1". He says that it has better surround sound than mine when watching TV. How do I change mine from PCM 2.0 to Dolby Digital 5.1? I have a Bose V20 system and the display shows PCM 2.0. Is this different or better than Dolby 5.1? My Bose V20 Lifestyle system shows PCM 2.0 on the display module when I watch TV (AT&T U-Verse) but when I watch a DVD is reads "Dolby Digital 5.1" on the display. How do I change the setting from PCM 2.0 to Dolby Digital 5.1? I have an HDMI cable from the U-Verse DVR to the Bose system and another HDMI cable from the Bose to the HD TV.

Posted by on

  • 3 more comments 
  • Anonymous Jun 17, 2008

    I had to use optical for the audio

  • krentler Oct 17, 2008

    I have the same problem with UVerse. I am not sure if it's a problem or not. It certainly sounds good...

  • gstyle003 Dec 18, 2008

    Same Prob here. When on TV (dish network) it reads Dolby Digital on certain channels, but when connected to the blu-ray via HDMI it reads PCM. Sucks. Have all settings correct as far as I know. When i go through component cables from the blu ray it does show Dobly Digital so it must be something to do with the HDMI carrying video/audio

  • Anonymous Jan 01, 2009

    I have had the same problem, but I can get it to reset by turning the power off then on. Last night however I lost all digital readings and I get no sound at all. The display simply says cbl-sat and won't display pcm, 2.0 or 5.1. I have looked at evry setting in the Bose system and TV and see nothing amiss. Of course, it's New Year's Day and Bose tech support is closed. I've owned this system for 14 months and find it to be very fickle. Wouldn't buy the system again.

  • nik_3ps Jan 01, 2009

    I have just purchased a v20 system, and the system sounds great when connected to my cable box ( currently comcast scientific atlantic box changing to cisco). When my sony blu ray player is on, the v20 display shows pcm 2.0 and the sound from the system is reduced by half and not as clear neither.


    Have tried calling bose and sony, but no luck as yet.  
    Thanks for any help.

×

6 Suggested Answers

  • 1 Answer

SOURCE: PCM 2.0

I have the Bose 3-2-1 GS Series II and initially could only get PCM audio. However, I now get Dolby Digital 2.0 and 5.1 audio through the following connections: 1) Connected a coaxial digital audio cable from Digital Audio Out (coaxial) on the HD cable box to CBL-SAT (D) on the Bose Media Center. 2) Connected a coaxial digital
audio cable from Digital Audio Out (coaxial) on my Toshiba DVD Recorder/Player to AUX (D) on the Bose Media Center. All video connections are from the cable box to the TV and from the Toshiba recorder/player to the TV. To receive Dolby Digital audio, I press either CBL-SAT or AUX on the Bose Remote Control. Good luck!

Posted on Jan 04, 2008

  • 1 Answer

SOURCE: System Info from Bose not displayed on Samsung TV

Unplug the power cord and plug it rght back in, I had this same problem and was troubleshooting forever.

Posted on Feb 05, 2009

  • 45 Answers

SOURCE: Faint sound when watching TV with Bose GSX 321 System

I connected my surround sound to the audio output on my samsung tv and it works fine. Of course I don't have an hdmi input on my surround sound system because its an older model, but it works great. Just got to put the surround sound to audio instead of dvd or tuner setting

Posted on May 08, 2009

  • 1 Answer

SOURCE: The remote for Bose lifestyle V20 system does not

I had the same problem, and called Bose tech support. They put me on track to the solution. The code you need is under AUX, Music Player, Apple where you probably looked already. The secret is that you need to "unpair" the apple remote first. If I remeber right, in apple TV you go to settings, general, remotes and unpair your remote. It still works, but is no longer the only remote that works.
Gerry

Posted on Jul 23, 2009

  • 1 Answer

SOURCE: bose lifestyle 38 system, sound problems

Call Bose and get the latest software for your system. This will solve the problem.
Details:
I had the exact same problem with my Lifestyle 48 system connected to a Dish Networks satellite box (Vip622). The sound would continually switch between 'Dolby Digital 2.0', 'Dolby Digital' and 'Dolby Digital 5.1'.
I called Bose Tech Support and they had me reset all of the components. This helped for a short time but it was still happening. They told me that the problem was with the Satellite box, since the Bose system just output what it was receiving and didn't do anything else. We also determined that my system software was quite old. They said that the software wouldn't make any difference, but I got them to send it out anyway.
Well, when the new software update arrived, I installed it on my Bose system and have not had any audio switching problems. So the Bose system software update seemed to fix the problem.

Posted on Aug 20, 2009

  • 2 Answers

SOURCE: Connect lifestyle 48 to plasma and dvr

You need to buy a Bose VS 2, video enhancer. Your cable/sattelite, vcr and aux connect to the VS 2 and the VS2 connects one HDMI cable to the TV. The VS2 then upconverts DVDs played on the lifestyle through the VS2/HDMI.

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change from 2.0 to 5.0


Sounds like your Cable box audio settings are outputting two channels (stereo) instead of five channels (surround). It could be on an automatic setting, meaning whatever the digital audio stream coming from the TV channel is, your Bose system will play audio in that config. Hence why it changed from 5.0 to 2.0.
Go into your Cable box audio settings and change the output to Dolby Digital (or similar). You will also need to be connected via a digital optical cable from your cable box to your Bose 321 to output true digital audio.
If you post the make and model of your cable box I might be able to give you more direct instructions on how to do this if your still having trouble.

Oct 29, 2012 | Bose (321GS) System

1 Answer

Have a Bose 3-2-1 Series III. When I put in a DVD, I get sound through the Bose but no picture on my Pioneer TV. This is the second time it has happened. The first time it, we managed to get it going...


Here are 3 things to try and an if all else fails at the end.

1) Make sure the TV is set to the correct Video Input to see the video from DVDs on the Bose system.
• Make sure a DVD is in the disc tray.
• If the TV is connected to the media center using the HDMI cable:
Switch from one Video Input to another and then back to the original input.

2) Turn everything off, then:
Turn on the TV and set the TV Video Input for the Bose system video.
Turn on the Bose system and press DVD.

3) Turn off both the TV and the Bose system and then:
Unplug the HDMI cable from both ends.
Disconnect the power cables from both your TV and the Bose 321 system.
Re-connect power to the TV and to the Bose 321 system.
When the Bose 321 system startup message disappears from the display,
re-connect the HDMI cable to the TV then Bose 321 system.
Turn on the TV first, then turn on the Bose 321 system.

If all the above fail then disconnect the HDMI cable that connects the TV to the Bose 321 system and reconnect the two using a Component cable, an S-Video cable, or the Composite cable provided with the system.


Please leave feedback

Cheers

Andy

Apr 28, 2011 | Bose 3·2·1 II System

1 Answer

I have a Sharp Aquos with a optical output, i conected it to the tv optical input of the panasonic sc ptx7 but it doesnt have audio via optical,on the contrary via rca works perfectly.


hi,
check the following on ur tv


1. Press MENU to display the MENU screen,
and then press c/d to select "Digital
Setup".
2. Press a/b to select "Audio Setup", and then
press ENTER.
3. Press a/b to select "PCM" or "Dolby
Digital", and then press ENTER.
4. Press MENU to exit.

PCM The optical output terminal output studio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital
The optical output terminal outputs audio signal in Dolby Digital form. it reproduces sound from surround program of digital.

also check the input assignment of ur dvd palyer's tv input. if it is selected as analog then change it to digital.
ok

Dec 20, 2010 | Panasonic SC-PTX7 Home Theater System With...

1 Answer

I have a friend with a 321 system. He says it


Unfortunatley no, its not software that reads dual layer discs, its hardware. I sold Bose for 2 years and do not know of any Bose items that will read dual-alyer discs. Dr. Bose has a hard time keeping up with technology sometimes. Other than that, the 321 is a great system!

Oct 02, 2009 | Bose 3 2 1 GSX System

1 Answer

Pretty much the same problem


I have the same system. I have a Lifestyle and a Sony TV with a Samsung Blueray player. I also have an X-box 360, plus my pc with all my CDs (I-tunes) plays through my bose. Do this:

1. Use the optical cable for the blueray player to the Bose (AUX).
2. Use a digital audio cable from the cable box (either black or orange output) to the Bose CBL-SAT digital input. (it's a single audio cable)
3. For my PC, I'm using a digital cable from the pc to the Bose. I'm using the TV output because it's empty.
4. For my x-box (which I'm not too happy about) I'm using regular red-white audio cables from Bose TV input directly to the TV audio out. (You can play all of the above through this channel, but don't).

I figured the most important high quality sound should come from the blueray player and from watching regular cable tv. For picture, you should be using all HDMI connections.

Hope this helps.
MC

Jun 26, 2009 | Bose Lifestyle 38 DVD Home Entertainment...

1 Answer

Bose PS 3-2-1 II speaker exspansion


Unfortunately this is impossible on the 321 series II systems. There also is no audio output on the media center to send to another amp either. As you may know, the 2 speakers are actually 4 speakers. Each small speaker array has 2 drivers. The 2 on the outside will project rear-channel audio to the sides, so placement of these speakers is important. Honestly, adding speakers would not make this sound very good. If the sound isn't too great as is, make sure you're using digital audio cables (optical or coax) from any external sources like a cable box or Blu-ray player. (if you don't see a Dolby Digital 5.1, DTS 5.1 or PCM 2.0 read-out on front of the media center, you'll know it's not digital. DVDs the exception)

Jun 18, 2009 | Bose 3·2·1 II System

1 Answer

Bose 321 is unable to read 6Channel AC3 Audio. Any way it can read the same?


This is true. The 321GSX will decode Dolby Digital 5.1, DTS 5.1 or PCM 2.0 digital signals from external sources (like most receivers) but will not decode any 6.1 content. AC3, mp3, mp4, wav, aiff all should work from a properly formated CD or DVD (must be -R or -RW format, or commercial), but not multi-channel AC3 content.

Jun 10, 2009 | Bose 3 2 1 GSX System

3 Answers

VOLUME ISSUE


I had my older bose 321 hooked up through vcr and sounded great. Then hooked it up through directv receiver and sounded better. then switched from direct to comcast and hooked the bose up throught the comcast hd receiver and the volume is aweful. same deal, have to crank it up high. Since the stereo built into the tv sounds so much better I disconnected the bose and am going to sell it.

Dec 28, 2007 | Bose 3 2 1 GSX System

2 Answers

PCM 2.0


I had the same problem with my 321 system. The fix is in the cable box settings. You want to change the Digital Out on the cable box..my choices were HDMI....Dolby Digital..and None. Choose Dolby Digital and it will show up on your Bose 321 display. I also have my cable box connected to my bose system via optical digital cable...and a digital coaxel cable from my dvr to my bose. Change that output setting on my cable box took care of the PCM 2.0 problem for me.

Dec 19, 2007 | Home Theater Systems

1 Answer

Bose 321


PCM means it thinks you have a digital cable hooked between the TV and Bose (most TV's don't have digital audio outs...). You will have to use the menus to change the TV input to use the ANALOG cables (assuming thats what you're using...).

Sep 09, 2007 | Bose 3 2 1 GSX System

Not finding what you are looking for?
Bose Lifestyle 20 System Logo

Related Topics:

1,821 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Home Theater Systems Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Bose Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...