Question about Printers & Copiers

1 Answer

Brother HL-240 Printer. All LED light are flashing, wont print

Posted by on

  • claire967 May 27, 2008

    Thanks fr the suggestion. Have checked cartridge, cleaned all I an and powered on and off but still all LED's continue to flash. I think it's dying!!

  • claire967 May 27, 2008

    Tried changing cable and checked all internally for stuck paper. Stilll no luck, thanks for trying

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Hi buddy!

check the cartillage if they have and also clean ok then try again.

PS:
pls rate me if my solution solve the issue and you need more further information. but if is invaluable solution rate me fixya.

Posted on May 27, 2008

  • Richard Yngente
    Richard Yngente May 27, 2008

    but if you try to print not print check the usb cable connected to the printer and try to change a new one. and look the motor for paper if they take inside.ok



    PS:
    pls rate me if my solution solve the issue and you need more further information. but if is invaluable solution rate me fixya.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I needed to print a page off my laptop and put the usb from the HL-1240 Laser Brother printer and it refuses to print, even though it is set as the default printer. Does the printer have to plugged into...


Hello,

When you plug the printer in to your computer it will either install automatically (using the HL-1435 drivers) or if it is already installed it should come online.

If the printer is not doing this then you need to look on the printer to see if any of the LED lights are on or flashing. The toner cartridge might be empty or you might need to replace the drum unit.

Check the lights and you can see what they each mean on the Brother website using the link below.

http://welcome.solutions.brother.com/BSC/public/us/ca/en/faq/faq/000000/000100/000070/faq000170_012.html?reg=us&c=ca&lang=en&prod=hl1230_all&Cat=11

Thanks,

Pat

Nov 09, 2010 | Brother HL 1240 Printer

2 Answers

I've recently installed a new Brother toner, but the drum light is flashing and the Brother hl 5140 printer won't print


DRUM UNIT "spent"
It can be reset if the printing quality is good
To reset the drum follow the instructions below:
Press the cover release button and then open the front cover of the printer.

Press and hold down Go button until all 4 LEDs are lit. Once all 4 LEDs are lit, release the Go button.

Close the front cover.
Make sure that the Drum LED is now off.
Caution: Reset the drum counter only when you replaced the drum unit with a new one.

Oct 09, 2009 | Brother HL 5140 Laser Printer

1 Answer

Red Priner LED Wont stop flashing


it is problem paper jum.please chack it then solve your problem

Jul 24, 2009 | Brother HL-2040 Laser Printer

1 Answer

Paper led light wont stop flashing


Pull the tray out and make sure the back guide is pushed against the paper. The back guide tends to move easily on these models

Jul 15, 2009 | Brother HL-2040 Laser Printer

2 Answers

All 3 Error lights are flashing (4 if you count the GO button)!!


When all lights flash it's a service problem. You press and hold the go button and see what lights are on then.error light means main PCB failure, Toner light means fuser failure, drum light means laser failure. Toner and error light means main motor error, drum plus error light means its a fan failure.

Jun 26, 2009 | Brother HL-2170W Laser Printer

1 Answer

All lights on solid, not flashing, wont print


Recommendation: See HL-5240/HL-5250DN USER'S GUIDE: Section (4), Control Panel: LEDs, (light emitting diodes) starting on pg. 44.

Apr 14, 2009 | Brother HL 5250DN Laser Printer

1 Answer

Won't print. blinking red paper light flashing


This usually means your printer is out of paper or there is a paper jam somewhere.

Mar 25, 2009 | Brother HL-2040 Laser Printer

1 Answer

Brother HL 5250 red light flashing


I found this solution on the web-- Hope it helps.

The HL-2070N gets stuck in a toner end-of-life error condition. Perform the following to clear :
With paper loaded, new toner in,

Open front door
Turn off printer
While holding down the GO button, turn printer back on
When all four LEDs light up release GO button. All LEDs will turn off
Press the GO button 2 times. The 3 LEDs (toner, drum, paper) will light up solid
Press the GO button 5 times
Paper light will be blinking
At this point the toner end-of-life condition has been reset. Close front door.
BTW, I got this from Brother Support. Also, just a reminder, timing is important here so don't pause between button presses.

Jan 28, 2009 | Brother HL-2070N Laser Printer

1 Answer

Printing mailing list


Sounds to me like the word doc's page size is not set to the same as your printers tray.

In word, file , page set up. page size/paper size is set to "letter" in US I think is standard, it's A4 in Oz

On printer driver check page size setting too

Contral panel, printers and faxs, RIgHT click on brother printer icon, properties, printing preferences, page size

post back

Nov 17, 2007 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

1,523 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...