Question about Everex Computers & Internet

1 Answer

I have forgotten my password and username for my computer. I haven't used it in a long time. Is there any other way to log in other than through enlighten or to recover the username and password?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 128 Answers

It would be very difficult but there is still a way to resolve it try these steps:

1. Place your Windows XP CD in your cd-rom and start your computer (it's assumed here that your XP CD is bootable - as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like "If one of the following Windows XP installations is damaged, Setup can try to repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically - you will see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you've made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i find my user name


Can you specify what username you'r looking for?

Nov 20, 2014 | Computers & Internet

1 Answer

I've forgotten my username and password to sign into my ny times account is there another step I can take in order to recover my account and log back in?


You'll need to contact NY Times support to have your password reset. Go online and try to sign in. There should be an option that says "forgot password" and/or "forgot username". Going this route should send a new password to the Email address you used when you created the account.

Aug 15, 2014 | Computers & Internet

1 Answer

Flirtomatic forgotten username.how do i retrive my username


On the Flirtomatic login page, click the "Forgotten your password?" link.

Jun 22, 2013 | Computers & Internet

2 Answers

My labtop is locked


Unlock Windows password with Windows built-in Administrator account.

Here's how this admin unlocks forgotten Windows password:
Start your computer and wait for the Windows Login or Welcome Screen. Once it shows, press Ctrl+Alt+Delete twice and then type Administrator in the pop-up username box, but leave the password column blank. Next you could successfully log onto system. The following steps for resetting the forgotten password are quite easy. You can make it from "Start->Control Panel->Users Accounts".

Besides, Windows Password Reset is a great choice .

Jun 20, 2012 | Acer Aspire One Netbook 8.9" Notebook

2 Answers

I lost my net gear n150 cd and i want to change my password..


How to View or Change Your Wireless Network Password Symptoms:
  • You have lost or forgotten the password to your wireless network
  • You have lost or forgotten the password for the router, access point or other network device
  • You left the default password or used a weak password and someone has hijacked your network

Depending on the router, you can either view or reset the wireless network password (also referred to as the passphrase or security key) if you can log into the router. Some routers mask the wireless network password, so while you cannot recover it, you can enter and save a new password.

If you cannot log into your router because you have forgotten the router password or your network has been hijacked, please refer to "Lost or forgotten password for router or other device" below.

To view or reset a wireless network password:

  1. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  2. From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.
  3. From the center screen, select your encryption type from under the Security Options heading.
    • If the wireless network passphrase is visible, review it and use it to log devices onto your network.
    • If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
If you cannot log into your router:

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!

Sep 10, 2011 | NetGear WNA1100 WirelessN 150 USB Adapter...

1 Answer

I can sign in on yahoo messeger at home but on another computer i get account locked messege, whats wrong?


Hi

Your account is unlikely to be locked. If it were, you would not be able access it even at home.

On your home computer you probably have your username and password saved and the website therefore recognizes your computer and accepts you as the authorized user.

On other computers you have to log in with your correct username and password or, if the forgotten username or password option is chosen, answer a series of securirty questions to regain access.

If you make too many attempts with the wrong username, password or answers to security questions, then the website will lock access to the specific computer being used.

I hope this helps.

Aug 26, 2011 | Computers & Internet

1 Answer

Forgot the password


If you have forgotten the password and haven't set it, try using no password. The default password is blank and the default username is Admin. If this does not work and you have no way of guessing your password, you will need to reset your router. This should only be done if you know your broadband username and password as it will wipe to blank if you reset and you will need to type them in again.

Aug 09, 2011 | D-Link DIR-615 Wireless Router

8 Answers

I need a reset password for my laptop acer travelMate 2423wxci


Hello, If you have a windows 7 password reset disk, you can follow the instructions below to recover the forgotten password.

1. If you enter the wrong password when you attempt to log on, Windows displays a message that the password is incorrect. Click OK to close the message.

2. Click Reset password, and then insert your windows password reset disk (or other removable media).

3. Follow the steps in the Password Reset Wizard to create a new password.

4. Log on with the new password. If you forget your password again, you can use the same password reset disk. You don't need to make a new one.


If you haven't created a windows 7 password reset disk before, you can use Spower Windows Password Reset (SWPR) to recover your forgotten password in few steps:



Step 1: Download and install Spower Windows Password Reset.

Step 2: Create a CD/DVD or USB password reset boot disk with SWPR.

Step 3: Boot your computer from password reset boot disk.

Step 4: Recover the forgotten password for administrator account.

For more information, please visit our site: Window password reset

I hope my answer can help you.

http://www.windowspasswordsreset.com/



1_18_2012_1_28_56_pm.jpg

Apr 23, 2011 | Computers & Internet

1 Answer

Forgotten password unable to log on


if u r using window xp,

so just press ctrl+alt+delete(press delete 2 time) ur login screen change to black and its ask u username and password,just clean everything and in username type
"administrator" then press enter u r login in administrator.

now goto control panel then user account and delete ur old account password.logout and now open ur account

Mar 06, 2010 | Computers & Internet

1 Answer

Internet


is it tmnet123 ? if you have changed it then go to streamyx counter to reset your password.

Aug 09, 2008 | Norton Password Manager 2004 (10109252)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Everex Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Jerry Umali

Level 3 Expert

979 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you an Everex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...