Question about Canon PIXMA MP470 All-in-One Printer

1 Answer

Error Code I had a paper jam, I have sorted that out but since then have had error code B200 showing, and no matter what I try the lights will not stop flashing on the printer. Please help!!!! Canon PIXMA MP470 - Keep getting error code B200. Everytime I try to print from my camera disk my printer completely shuts down. When I power back up the error code B200 appears. I have tried unplugging the main power. I have tried to reset. Nothing seems to work.

Posted by on

  • Anonymous Nov 09, 2008

    I tried to print out a pic it came out with white streaks then my printer said I had service error B200, what is it?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer was out of ink I put new ink in and now it say printer error unplug an contact service center b 200. any way I can trouble shoot it myself I really need to print these important papers now


How to Fix Canon Pixma Support Code B200 Error Message

? 3:06
https://www.youtube.com/watch?v=jxhkgrozauY
Mar 5, 2014 - Uploaded by Refresh Cartridges
The Canon Pixma "Support Code B200" error message may also be accompanied by text stating "Contact ..

Nov 17, 2015 | Printers & Copiers

1 Answer

Canon MP276 show a error number B200. how i solve it?


FIXED: Canon Printer Error B200 With 5 Different Solutions ...

? 3:33
www.youtube.com/watch?v=LZELHKjVZAY Mar 18, 2014 - Uploaded by ITJungles Five different solutions you can try to fix the Canon printer error B200. Is your printer playing up and not doing ..

Jul 22, 2015 | Canon Printers & Copiers

2 Answers

4TH LIGHT FROM THE TOP KEEPS COMING ON LEXMARK E232


What this light sequence means that the printer has a paper jam.

When a paper jam occurs, the printer stops and the operator panel's Paper Jam light and Continue button lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence.


How to clear Paper Jam

Press Continue button twice quickly to see the secondary error code.


To get the secondary error codes

When the Error light (!) and Continue button lights are both on, a secondary error has occurred.

When the Paper Jam light (4th light) and Continue button lights are both on, a paper jam secondary error has occurred.

Press and release Continue button twice quickly to display the secondary error code light sequence.


Press Continue button to resume printing once all the jammed pages are cleared from the paper path.

We recommend that you clear the entire paper path when a paper jam occurs.


To clear a paper jam:


1 If you are feeding paper from a tray, remove the tray, and then remove any jams.

2 Open the front cover and remove the print cartridge assembly.

NOTE: Do not leave the print cartridge assembly exposed to direct light for an Extended period of time. Extended light exposure can cause print quality problems.

3 Remove any jams in the area behind the print cartridge assembly.

4 Lift the flap at the front of the printer and remove any jams beneath the flap.

5 Open the rear exit and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue button to resume printing.

NOTE: The printer reprints the pages that caused the paper jam.

Jun 30, 2011 | Lexmark E232 Laser Printer

1 Answer

Error code 391 paper jam - no paper jam though. Open front cover and close and that resets machine but when you try to print error code 391 again!


Check the area where its showing the paper jam to see if there are bits of paper there. Most of these issues are caused by tiny pieces of paper blocking the sensors.

May 04, 2011 | Oki Electric Industry C6150N Laser Printer

2 Answers

My is not working & shows an error code B200.


FLASHING ORANGE LIGHT ERROR MESSAGES


Try counting the number of orange flashes.
* two flashes means you’re out of paper or the paper is not feeding correctly.
* three flashes means there is a paper Jam or the output tray is closed.
* four flashes means the ink tank is empty
* five flashes means the print head is not installed correctly or not installed or is defective (before buying a new print head always try the cleaning instructions at the end of this post first.)
* six flashes means the inner cover is open or not closed properly.
* seven flashes means you counted wrong.....
* eight flashes means the waste ink absorber is almost full or full.
* nine flashes mean that a digital camera or video that is connected is not compatible with the printer. If a specific amount of time lapses without getting a response from the digital camera or video camcorder this will happen.
* ten flashes means it can not print to both sides of the page
* eleven flashes means the automatic print head alignment failed. (this can be caused by low ink levels, ink tanks not being installed correctly, the print heads being clogged. It can also be caused by the paper output slot being exposed to a strong light source (Press the resume /cancel button and move the printer to a darker location and try to align the print head again.
* check to make sure the lock lever is correctly positioned (down)
If the above does not work, align the print head manually by opening the printer properties dialog box and clicking the maintenance tab and then select the print heal alignment button on the left side, second row down.

Mar 25, 2010 | Canon Printers & Copiers

1 Answer

Canon pixma MP480 printer error code B200. What is B200?


Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Apr 07, 2009 | Canon PIXMA MP460 All-In-One InkJet...

2 Answers

Error Code B200


Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Nov 17, 2008 | Canon PIXMA MX850 Multifunction Printer

1 Answer

I have just re-started my Canon PIXMA MP610 after it has been in storage for 2 months. It is around 1yr old. It seemed to work OK. When i went to print the 1st page, the paper jammed because of some...


I would suggest removing the printhead, make sure there are no more dead roach's under the printhead, also make sure all lights on the ink tanks are lite up, the first error code you mentioned has to do with the ink tanks, the second one has to do with the printhead. I would suggest un-installing the printhead, then reinstalling it doing the alignment, and that should clear the error code.

Sep 28, 2008 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Error Code B200 on Canon Pixma IP4300


Just restart the system and turn off the printer and turn on the printer it will work.

Check did you correctly placed your cartidges.

Mar 03, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Error Code


B200 is a print head error and seems to be a common issue with these printers.

Read this post

If you just bought your printer and are receiving this error I would take it back.

Feb 26, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP470 All-in-One Printer Logo

1,152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...