Question about Audiovox FPE3000 30 in. HD-Ready LCD Television

1 Answer

No sound no picture

We can hear it power up but there is nothing after that.

Posted by on

  • biemillerbob Jun 08, 2008

    I have the same problem, TV powers on for just a second and shows the audiovox name then goes blank

  • tjott1977 Sep 09, 2008

    Our tv does the same thing... you can tell it turns on because Audiovox flashes for a second but then the screen goes completely black with no sound. And you can't flop between tv and the video inputs either.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That happen to me when i put the tv in the hop i found out it was the power adapter

Posted on Jun 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Picture/Sound


You have some bad caps in power supply going out

Dec 22, 2007 | Sony KP-53HS30 53" Rear Projection...

2 Answers

Repalaced bad capaitor(bulge on top) Now powers up. snowy with sound and picture goes blank. With nothing on screen. Tried to use remote but nothing shows up on screen. Note the snow is from not being...


When the filter caps went bad, the power supply output will be AC and feeding the circuits which can damaged the parts on the board. Check to see if you have the 12 or 18v feeding the back light invereter board. There are surface mounted fuses on the inverter board also. Send me good pictures of the whole back where all the boards are and close up picture of the inverter board, may be I walk you through. budmrtn@aol.com

Dec 10, 2009 | Westinghouse SK-19H210S Television

1 Answer

No picture No audio


Replace the lamp.

Nov 01, 2009 | Televison & Video

1 Answer

Playstation 3 does turn on but no picture or sound at all


hold the power button down for 20 seconds
you will hear a few beeps but keep holding the power button in until you see a picture

Jul 04, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Won't power up


contact the customer care.

Oct 04, 2008 | Sanyo DP32746 32 in. LCD Television

1 Answer

Picture on TV stuck on one picture


Ok fixed it. Just unplugged the box and plugged it back in and it works fine.

Apr 05, 2008 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

No picture, but power light is on


THE POWER SUPPLY OF YOUR TV WAS THE PROBLEM,YOU COLD SOLDER THE MAINBOARD OF YOUR TV,AND THE CRT SOCKET CONNECT TO THE TUBE IS ALSO COLDSOLDER,.

Mar 13, 2008 | RCA 27F530T 27" TV

1 Answer

No sound or picture


Your tv is going into protection mode, it has detected a short in one of tv's circuits. thus, not allowing your tv come on. Can give you more detail if you want to repair it yourself, or call a factory authorized repair shop to assist you.

Sep 04, 2006 | Toshiba 43A10 43" Rear Projection...

Not finding what you are looking for?
Audiovox FPE3000 30 in. HD-Ready LCD Television Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2307 Answers

The Knight
The Knight

Level 3 Expert

73118 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Audiovox Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...