Question about Maytag Washing Machines

1 Answer

I have a maytag EpicZ, model # MHW2600TW00 with an error code of F01. Do you know how to clear this code?

Posted by on

  • ride967 Sep 22, 2008

    F01 CODE IS FLASHING ON MY EPIC-Z WASHER. I TRIED UNPLUGGING THE UNIT FROM THE WALL OUTLET BUT IT WILL NOT RESET. .. . . SUGGESTIONS ANYONE, PLEASE ? ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I just had this problem and I kept the washing machine on and flashing f01 and I pulled the power cord out of the outlet while it was still on and it reset it and I could start washing immediately.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore elite he5t washer model 11047789701 flashing F01 fault code- does this mean ccu must be replaced?


Do not take this as definitive answer! I am not an expert. A F01 error is indicative that the Central Control Unit cannot get instructions from the EEPROM. If you have not already done so, unplug the washer for a full 2 minutes to clear any instructions in memory, then plug it back in. If you still have a F01 error I suspicion that it is a bad CCU board. You can try to run the diagnostic on page 8 of the service manual but I do not think it will run if it is a bad CCU board.

Mar 08, 2015 | Kenmore Elite HE5t Washer

1 Answer

Front load washer displays f 24


Here is a link to the owner's manual for that device.

http://www.searspartsdirect.com/partsdirect/user-manuals/mhwz600tw01-maytag-residential+washer-manual

Mar 19, 2014 | Washing Machines

1 Answer

Error code F01 E02


For how long did you unplug the power cord? If it was under 5 minutes, unplug it for longer. Check if that clears the error code. If it doesn't, the motor control unit needs to be replaced.

Please double check your model number to get the correct part. Most of the Whirlpool washers have model numbers that start with 3 letters.

I hope this helps.

Cindy Wells

Dec 20, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Need manual for Maytag EpicZ Washer and Dryer


Try in this link: maytag.com/webapp/wcs/stores/OCManualsLiterature

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 16, 2011 | Maytag Washing Machines

1 Answer

I have a Maytag EpicZ. It is giving me error code F20. What do I do?


its a reaction code try unplugging the washer for ten minutes then try it again let me know how it goes



merry christmas

Dec 21, 2010 | Maytag Washing Machines

4 Answers

Maytag epic z washer flashes f-01 error code


I had the same problem and the code f01 would flash, I could select the wash and make selections with all the other buttons but once I pushed start it would flash f01. I fixed the problem by not turning the machine off and pulling the power cord out of the wall and it seemed to reset it. I could immediately turn the machine on and it stared working.

May 22, 2008 | Washing Machines

1 Answer

Getting F01 error message on my maytag epicz


control bd problem remove top ..3 screws on rear.. control right front corner ck all wires first and pressure switch right rear corner

May 02, 2008 | Washing Machines

1 Answer

Maytag EpicZ has a F01 code. The machine will not start!


I have had the same problem and I just fixed it. The f01 code was flashing and I left the machine on and pulled the cord out of the outlet and it restarted. Mine would not start, it would power on and you could select the type of wash and make any selection, but once you pressed start it would start flashing f01. I left if flashing and pulled the plug and it started working immediately.

Apr 15, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...