Question about Xerox WorkCentre XD125F All-In-One Laser Printer

1 Answer

H4 message call service

H4 message

from captain

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.

  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Clearing service man on 5320 sharp copier


Hello, NICOLAS

Let me give you, a url when you can find sharp error codes and fix by youself, if you have any other cuestion, please write a comment, im here for help you.

How to solve the h4 subcode 00 error message on sharp AL-2030 copiers

http://www.en.rellenadodecartuchos.com/2014/05/how-to-solve-h4-subcode-00-error-message-on-sharp-al-2030-copiers.html

thanks for comment if need more help

clearing-service-man-5320-sharp-copier-me3cdhsxedgbgwufhmxd4s52-1-0.png

Nov 16, 2015 | Sharp Printers & Copiers

1 Answer

What does Olivetti d-copia 120 error message H4 mean?


  1. H4 00 means Heat roller abnormally low temperature

Jan 26, 2013 | Printers & Copiers

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

SHARP AR C150 COPIER-ERROR MESSAGE H4-01


H means heat, you have a bad fuser.

Jan 28, 2010 | Sharp AR-C150 Copier

1 Answer

System error H4-00


H4 indicates a heating problem in the fuser. The roller never reached a specific temp. Make sure the fuser is free of any left over paper pieces (maybe from a paper jam). Check to make sure its clean.
Try reseting the the error in service mode.
To enter the test command mode, press the keys as
follows one after the other :
[#] key [*] key [C] key [*] key then enter 14 and press start/copy key. this clear error counter. make sure to restart copier afterwards.

May 19, 2009 | Sharp AR-168S Copier

1 Answer

Error Message H4


It is a fuser problem, sometimes it can be reset by technician or you should replace the fuser lamp

Apr 02, 2009 | Sharp AL-1530CS All-In-One Laser Printer

1 Answer

Sharp H4 Error message


Hello sir; The code need to reset;
1, press "#", "interrupt", "c", "interrupt" keys.
2, enter 14 then press start.
3, if machine work, please don't forget to give me a good rating.
THANK YOU !!!

Feb 09, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Code: H4-00, H4-0Q


H4-0 The fusing unit doesn't heat up.

You have to reset fuser errors with simulation 14.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.

Jan 25, 2009 | Sharp AR-M350N Copier

2 Answers

Eror code on sharp copier AR-M276


UNRELATED PROBLEMS.
H4 = MAIN HEATER LAMP ABNORMAL LOW TEMP. THE FINAL UNIT BEFORE PAPER EXITS. HAS TO BE HOT. LAMP OR THERMO-FUSE? CHECK CONTINUITY LAMP WIRE IN THROUGH WHOLE PATH TO OTHER LAMP WIRE OUT.
E1-15 = IMC board Page Memory error/SRAM
error. MEMORY FULL? Mfr. says "Print Buffer Page Memory or Work SRAM abnormality"
SORRY NO MORE.

Jun 24, 2008 | Printers & Copiers

3 Answers

Cant get rid of blinking error message, nothing works


The correct buttons to push in order to get into the service mode on a 162D are [#] key, [*] key, [C] key and [*] key. Then you key in 14 - 00 and press the Start key. If that fails to bring your machine back on, you'll have to replace the fusing assembly.

Apr 12, 2007 | Toshiba e-Studio162D Copier

Not finding what you are looking for?
Xerox WorkCentre XD125F All-In-One Laser Printer Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...