Question about Canon PIXMA MP510 All-In-One InkJet Printer

2 Answers

What is service error B200? - Canon PIXMA MP510 All-In-One InkJet Printer

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Well every advice is the same except a little altered (use a warm cotton swab to clean inside machine and on print head channels) but then it says if possible replace print head but honestly this has become a primitive Machine for turning humans into corpses - buy a new one.

Posted on Nov 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 7,733 Answers

Try this Link from Cannon.

Post back!

Posted on Oct 03, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: What is service error B200?

ITS A HARDWARE ISSUE....DO NOT OPEN OR REPAIR

Posted on Jun 10, 2010

  • 37 Answers

SOURCE: service error B200. camcel printing and turn

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer was out of ink I put new ink in and now it say printer error unplug an contact service center b 200. any way I can trouble shoot it myself I really need to print these important papers now


How to Fix Canon Pixma Support Code B200 Error Message

? 3:06
https://www.youtube.com/watch?v=jxhkgrozauY
Mar 5, 2014 - Uploaded by Refresh Cartridges
The Canon Pixma "Support Code B200" error message may also be accompanied by text stating "Contact ..

Nov 17, 2015 | Office Equipment & Supplies

1 Answer

Canon MP276 show a error number B200. how i solve it?


FIXED: Canon Printer Error B200 With 5 Different Solutions ...

? 3:33
www.youtube.com/watch?v=LZELHKjVZAY Mar 18, 2014 - Uploaded by ITJungles Five different solutions you can try to fix the Canon printer error B200. Is your printer playing up and not doing ..

Jul 22, 2015 | Canon Office Equipment & Supplies

2 Answers

Error code B200 PIXMA MX452


Error B200 is a print head overheat error. Just need a new printhead. You should see the power and alarm lights flash on and off 10 times then repeat the cycle. That's confirms the fault more than the error code. Its very simple to fit a head, just be careful putting the new one in as it's easy to break the pins in the carriage. No force is needed when fitting the head. Just let it drop in and lock the lever. Try taking out the old head first and gently clean the contacts at the back as they can rarely make poor contact with the carriage pins.
Good luck

Sep 22, 2014 | Canon Pixma MX452

1 Answer

Cannon pixma mg5220 printer, b200 error msg. how do you remove the printhead ?


Error B200: A service error has occurred.
  1. Turn off the printer.
  2. Disconnect the power cable.
  3. Open the printer cover.
  4. Check for any orange protective tape or white polystyrene and remove if necessary.
  5. Check that there are no foreign objects in the printer (such as a paper clip) and remove if necessary.
  6. Close the cover.
  7. Reconnect and turn on.
If the above solution has not resolved your error, the device needs to be send to service for repair.
It can be that only the print head has malfunctions, but mostly it is another defect in the printer which causes also a defective print head. Changing the print head can solve the issue for a couple of weeks, but then the error will occur again.

May 06, 2014 | Canon PIXMA MG5220 Wireless Photo...

1 Answer

Error b200


A service error has occurred.
  1. Turn off the printer.
  2. Disconnect the power cable.
  3. Open the printer cover.
  4. Check for any orange protective tape or white polystyrene and remove if necessary.
  5. Check that there are no foreign objects in the printer (such as a paper clip) and remove if necessary.
  6. Close the cover.
  7. Reconnect and turn on.
If the above solution has not resolved your error, the device needs to be send to service for repair.

Mar 26, 2014 | Canon Pixma iX6520 Inkjet Printer 4895b002

3 Answers

Canon Printer Pixma MP540 with error code B200 - what can I do? Thank you for your support. Arthur


Try to press down on the sponge to get it to work again. It may be a waste toner issue, which generally is repaired at an authorized service center for canon by contacting 1-800-OK CANON or logging on to canonusa.com.

Good luck on this.

Feb 12, 2011 | Canon PIXMA MP540 All-In-One InkJet...

3 Answers

What is service error B200? The printer doesnt work and it says it has a "service error B200"


According to Canon's documentation, this is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board; a physical hardware malfunction.
This is Canon's official stance on the error:

Turn off the machine, and unplug the power cord of the machine from the power supply. If the problem is not resolved, contact your Canon service representative.

After looking a bit more, I discovered that the B200 error is a Voltage High Error on the iP4500 chip. Try calling Canon tech support at 1-800-828-4040. If your printer is still under warranty, they will probably send you a new printhead or a new printer.

May 26, 2010 | Canon PIXMA iP3300 InkJet Photo Printer

4 Answers

Error code B200 on a MX850, what do i do?


Best solution for B200 error code:

http://www.youtube.com/watch?v=AyHaxjFg8aI

May 12, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA  MP510 All-In-One InkJet Printer Logo

1,197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...