Question about KitchenAid KUDR01TJ Dishwasher

1 Answer

There is water sitting in the bottom after all the cycles finish I tried to cancel and rinse to no effect.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

9 times out of 10 there will be debris stuck in the pump impeller... access from the bottom of dishwasher by tilting to side or back... common fault...

Posted on Oct 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Operation of machine wash, rinse, spin


at the end of the wash does it empty ok it needs to before it can move on to take on water for the rinses if it doesn't check the pump is not blocked if it does empty the issue may be water valve for cold water also on the wash cycle does the machine heat up if not it will just sit there washing forever

Mar 04, 2014 | Indesit Washing Machines

1 Answer

No agitation on extra rinse cycle on Maytag Washing Machine MAV8557AWW


The manufacturer may have found there was little or no advantage to having agitation in the second rinse cycle so omitted it.

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Machine stopped on the rinse cycle with the display showing "caution high water level", I tried to cancel the program and the display shows "cancelling program" and sound like it's proceeding but it...


Unplug your machine and start a new load. The machine will since that there is enough water in the machine and finish the cycle. If you are still having problems, call the manufacture's phone number listed in your user guide or their web site. They usually have contact information listed. Also, check the troubleshooting guide in your user's manual. You can probably download one from the internet.

Dec 10, 2013 | Dyson Washing Machines

1 Answer

After rinse fill the pump will not start


Hello, is there water in the bottom of your dishwasher? If there is water in bottom. Then try running the dishwasher throught another washing cycle. Now, if there is not water in the bottom of your dishwasher. Then the dishwasher has finished its washing cycle, rinsing the cleaned dishes. GB...stewbison

Sep 17, 2011 | Dishwashers

1 Answer

Washing machine displays an LF error code. Started last week during whitest whites cycle in rinse. I cancelled and just did rinse to finish my load. All other cycles worked and yesterday all started...


LF = Long Fill

LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.
Is water supply connected and turned on?
Are hose screens plugged?
Is water entering the tub? If so check pressure hose connection to machine/motor control.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 07, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Won't finish cycle


The water may not be getting hot enough in the rinse cycle. Usually it needs to heat to 140 to 160 degrees for rinsing. If the heating element is not working the water will not heat. If your DW has a Sanitary setting it will be calling for the water to be 160 degrees. If you have the option to override the Sanitary settin, try that to see if the rinse cycle will finish with cooler water.

Mar 27, 2010 | Dishwashers

1 Answer

Detergent packs are not dissolving


Either:
  1. the water does not get into the dishwasher open the dishwasher 3-4 times during cycle, you should see some water at least once, if not - check water valve, water level float and water pressure.
  2. the pump is clogged - there is water, the motor will run but no water is circulated. Check pump filters, check chopper and impeller.
  3. motor in main pump is not working - could be caused by something stuck on the impeller or chopper or could be a problem with the motor itself or control board. Check if line voltage is coming to the motor during wash/rinse cycle.
Good luck,
Vlad
First Choice Appliance

Apr 21, 2009 | KitchenAid 24 in. KUDS02SRSS Stainless...

1 Answer

Washer stopping mid-cycle with no error


Remove the 3 screws at the bottom of the front panel under the washer door. Your filter door will be light brown. If you find a hose there it is to drain out excess water (water that could not be drained by your pump) After you have drained, unscrew the cap and remove all the junk inside. Have a large plastic bag to catch junk and water. Refit carefully after cleaning out. If not solved, something shd be blocking your pump, check this out. F-21 filter blocked.

How abt a nice rating for the free help?

Jan 04, 2009 | Whirlpool GHW9300 Duet Washer

2 Answers

Kenmore elite washer problem


sounds as if you have a drain issue, most common cause of fault is theres something stuck in the pump housing. remove the lower acess panel(3 screws along the bottom of the forn of unit) youll gain acess to the pump housing, remove the large cover to the "button trap" by uncscrewimg the cover, it will be righthin front of you in the center of machine when cover removed, im sure youll find your blockage within there

Oct 29, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Washer won't finish cycle .


The error FH will stem from the drain pump operation and sometimes from the flow meter itself. The first thing to check is to drop the bottom panel and make sure the drain filter is clean. It sits right in front and just unscrews. Make sure to have enough towels on hand to soak up the water that is left in the tub. After you have checked this make sure both water valves are turned on, clear the error by pressing pause/cancel twice. Check to make sure the drain hose is not kinked and that there is no siphon problem.(Check your pump too now that you've opened up) If the error still returns after checking the above, the next thing to suspect is the flow meter itself. This sits right in line with the water inlet valves. It's just a reed valve that measures the amount of water entering the washer and monitors the pressure switch. You can access it by removing the top and it will be on the left side in line with the inlet valve. Look for holes in this tube, change if any.

Sep 26, 2008 | Hotpoint WMA31 Front Load Washer

Not finding what you are looking for?
KitchenAid KUDR01TJ Dishwasher Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Cindy Wells

Level 3 Expert

5062 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...