Question about Office Equipment & Supplies

3 Answers

How do I change my password on my Linksys WRT54g

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 45 Answers

Hold the reset button on the back of your router for 30 seconds. Then your password will be restored to its default. (user: Admin/ password: admin).

Posted on Oct 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 385 Answers

Open a browser window and then type http://192.168.1.0 or http://192.168.1.1 and enter your router settings. change settings including password. unless you've set it up differently and actually have a username and password, leave the username space blank and use "admin" as the password. that's often the default password on a linksys. linksys has a great support page. they have the drivers, manuals, the works.
your specific page for the drivers and the manual for your router which includes specific info including password, setup procedures, explanation of the various settings, how to do a hard factory reset, etc. is here http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G - click on the download button below the picture

Posted on Oct 03, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 78 Answers

Go to your internet explorer
type 192.168.1.1 on the Address Bar
Enter your CURRENT password default is
Username: admin
Password: leave it blank
go to Administration
you should be able to see Password and Re-Enter Password
Type in the Password you want then hit Save Settings.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I wand to change the password


Open the setup page of the router.
Go to Administration tab.
There you will find the place to change the router password.
Change the password, confirm it and click save settings.
It will log you out. Re-login with the new password.

See Linksys router password

Mar 02, 2012 | Linksys Wireless-G WRT54G Router

1 Answer

How to secure linksys


Login to your router and configure your settings. Change your router password by using 20 character password alpha number caps and lowercase combination password. that will secure your linksys.

Feb 23, 2012 | Linksys Wireless-G WRT54G Router

1 Answer

Im trying to find my password for my router but i cant.


Reset Button

Note:

Resetting the router to the factory defaults will delete any changes you have made to the router, including any security settings. This should be used as a last resort.
The first method involves simply pressing a button located on the back of the router. The image below (courtesy of Linksys) shows where the button is located.
linksys-reset.png

Linksys WRT54G Reset Button Location
To reset your router, use the following steps:

  1. Press the reset button for 30 seconds.
  2. The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted.
  3. Open up your Web browser and enter "192.168.1.1′ in the address bar.
  4. For the login, leave a blank ID and enter "admin" as the password.
The router has now been reset. Follow the steps in Securing Linksys WRT54G Wireless-G Router to secure your router and create a good wireless network security.
Through the Web Administration PagesThe second method involves logging into the Web administration pages of the router. Use the following steps to reset the router using this method:
  1. Open your Web browser and enter the IP address of your router. By default, the address is "192.168.1.1′.
  2. Enter your user ID And password when prompted. Hopefully this has been changed, but if it hasn't, the default is no ID and "admin" as the password.
  3. At the top of the Web page, click "Administration" and then "Factory Defaults".
  4. Beside "Restore Factory Defaults", click "Yes".
  5. Now click the "Save Settings" button at the bottom of the Web page.
Your WRT54G wireless router should now be reset to the factory defaults. Ensure you follow the steps outlined in Securing Linksys WRT54G Wireless-G Router to secure your router and maintain your wireless network security.
SummaryThis post has provided two methods you can use to reset your Linksys WRT54G Wireless-G router. If you are having problems with your router, try resetting the router to the factory defaults, and then make the changes again and see if the router starts working again.

Sep 24, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

How to make a password for my Linksys WRT54G Router


To make a password, do this. On your browser, type in 192.168.1.1.. Once in there enter admin for the default password with username as blank if it asks for it.
Open the administrative page and you will find the place to change the password.
Hope this helps. Thank you for using fixya! May you have a great day!

Mar 31, 2011 | Linksys Wireless-G WRT54G Router

3 Answers

I need to change the Router password


Here is a video for you if you'd like:

http://www.youtube.com/watch?v=5eSvYPw8yug

it will tell yuo the current login and password, if you use it or reset using button

Nov 27, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

How can i make password my linksys?


You can change the default password on the Linksys wireless router by connecting a LAN cable from the Linksys to the LAN port on the computer. Then open a browser and type the Linksys configuration URL http://192.168.1.1
The default login = admin
the default PW = admin
You can now change the password in the password setting.

To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Nov 12, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I have a WRT54G -V5 which works great with all my home PC's. Have purchased itouch and it does see my Linksys device and I do know the password but when I put that in itouch it does not connect. The...


You are looking for a Wireless Security key, this is not the Linksys password for the admin portion, look on the bottom it maybe there if not changed. Else goto the router home page and check it there something like 192.168.0.1. or 192.168.1.1 etc etc

Sep 05, 2010 | Linksys WRT54G Wireless-G Broadband Router...

1 Answer

I have a Linksys Router WRT54G. I'm typing


Are you typing that IP address into your web browser? 192.168.1.1 is the default address that the WRT54G uses, so if that's not the right address, then it got changed somewhere along the lines. You can reset your router to set it back to its default settings, which would be 192.168.1.1.

Once you pull up the configuration software in your browser, you may need to log in with the username and password you chose -- otherwise the default username and password are "admin" and "admin".

Aug 08, 2010 | Linksys Wireless-G WRT54G Router...

1 Answer

How to cennecting Aztech modem DSL600E with Router linksys WRT54G


First!
Do you have a connection in your modem?
if you do, you need to set up the linksys router in DHCP internet set up.
To have access to the linksys you need to go to:
http://192.168.1.1
The password it's admin
and the username in blank (no password)
change the internet setup to DHCP

Make sure you don't have the Same address for 192.168.1.1 or you modem cause if you do you'll need to change the ip address on the linksys router...
:)

Apr 25, 2010 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...