Question about Hitachi 43FDX01B TV

1 Answer

43FDX01B convergence convergence module.. I had to replace this two yrs ago which cost 450.. It is going out again! I would like to know what the part number would be so I can order a new module.

Posted by on

  • Freeebeee May 31, 2008

    I replaced both convergence chips and fixed the red but blue will not adjust and wonder what resistors I need to replace as I know they sometimes go out with the chips. Any suggestions? or bourd locations?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 5,568 Answers

Maybe you don't require a new one; take a look at this procedure:

http://zeroization.com/hitachi-43fxd01b-covergence-adjust/

It's worth shot at that price-

Posted on May 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are green and red waves on the top and bottom of my screen and the shapes in the picture are distorted. This is on a Hitachi 43FDX01B


Ur convergence it dead.U know how to solders?Buy a convergence kit at Tv repair World.com,Tvrepairkits.com.Replaced 2 convergence ICS,and all it resistors.Shop will cost u $300 for parts and labors.

Jan 27, 2010 | Hitachi 43FDX01B TV

1 Answer

Convergence issue; red 3D effect. In grid convergence mode blue will converge w/green fixed lines and red horizontal will but the verticle red will not adjust far enough left to converge. has ajustment...


Convergence is dead.Must know how to solders?Must replaced ICS and all of it resistors.Tries Tv repair World.com,Tvrepairkits.com for a convergence kit.The shop will cost u $300 for parts and labors.

Jan 24, 2010 | Hitachi 43FDX01B TV

1 Answer

Sony KP-53HS30 Screen colapsing and the colors are distorted??? I had a guy tell me i needed to replace the convergence and IC's. He said i had 10 and he quoted me a repair of around $600.00. are there...


10 is questionable? However, 450 to 600 bills is common. You cannot do this yourself unless you have a buddy that knows what to do,very delicate work.

Jul 10, 2009 | Hitachi 43FDX01B TV

2 Answers

Convergence on Hitachi 43fdx01B not working


ik04,ik05:stk392-110(replaced with:stk392-150)resistors:rk46,54:1,5ohm.,rk42,50:2,2ohm.,rk58:3,3ohm.,rk62:1,8ohm..try make order in "MCMelectronics".,partstore.,bdent.

Jul 09, 2009 | Hitachi 43FDX01B TV

1 Answer

HITICHI 43FDX01B SEEING DOUBLE


Bob, IK04 & 05 are the board designation numbers for the 2 stk 392-150`s, these are the convergence ic`s in your set and from your description that convergence circuit has failed again. They are high failure ic`s but usually last 5-6 yrs. not 1, if they were generics not originals then it wouldn`t surprise me but only the tech that installed them can answer that, do you have experience soldering & un-soldering ? If you don`t you can`t do this yourself, takes a good tech approx. 1.5 hrs to do, get back to me with more info and I`ll try to help you, video-tek

Jun 05, 2009 | Hitachi 51UWX20B 51" Rear Projection...

1 Answer

Red line on screen


something going on w/ the convergence take to tv shop before it will cost lot more good luck shad

May 03, 2009 | Hitachi 43FDX01B TV

1 Answer

Hitachi 42" TV


This is a problem with the convergence circuit. If you can solder, try resoldering the pins on the convergence ICs. If that fails to resolve the problem, replace the ICs. These ICs are large and black, attached to a heat sink and are marked STKxxx.

Keep us posted on your progress.
Dan

Jun 19, 2008 | Hitachi 43FDX01B TV

2 Answers

Hdtv convergence problem on Hitachi


Needs convergence IC's replaced by qualified technician.
Good set to keep a few more years..................T.

Please rate this solution....................

Oct 24, 2007 | Hitachi 43FDX01B TV

1 Answer

43fdx01 hitachi


possible convergence overdrive from the IC's. This will cause the symptom you describe. ....accordianman

Jul 17, 2006 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...