Question about Annovi Reverberi RMV2.5G27D Pressure Washer Pump

1 Answer

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this general pump oil

Posted on Nov 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am I finding oil in my air cleaner cover and filter? thx


Hi, Jim oil leaking from your air cleaner is caused by oil carryover from the engine. For whatever reason the breather system is not separating enough oil mist and air from the piston downstroke. There are cheap and quick easy fixes and there are more expensive ones. Start by trying the following:
1. Run your oil level half way between the add and full mark when hot.
2. Run oil breather lines from the head into a TEE fitting below carb/induction module then a single line into a mini filter under the frame.
3. Purchase Arlen Ness Super Sucker.
4. Replace umbrella valves and realign oil pump.
5. Upgrade oil pump and cam plate.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below, and for specific information or questions please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
Harley Davidson Manuals Mark Workshop
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Owner Manuals Harley Davidson USA
Instant Tech Relief A must have !!! only $6 a month "CHEAP"

Apr 29, 2016 | 2015 Harley Davidson Dyna Low Rider

1 Answer

Oil enters air box at high rpm on my ttr600 belgarda


Hi, Anonymous oil leaking from your air cleaner is caused by oil carryover from the engine. For whatever reason, the breather system is not separating enough oil mist and air from the piston downstroke. There are cheap and quick easy fixes and there are more expensive ones. First, make sure your breather hoses are not dry and cracked if they are ok you can start by trying the following:
1. Run your oil level half way between the add and full mark when hot.
2. Run oil breather lines from the head into a TEE fitting below carb/induction module then a single line into a mini filter under the frame.
3. Purchase Arlen Ness Super Sucker.
4. Replace umbrella valves and realign oil pump.
5. Upgrade oil pump and cam plate.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Oil spraying into airbox from crankcase breather Horizons Unlimited The...
Yamaha TT600RE few questions
YAMAHA TT600R Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-tt-owners-manuals

Sep 26, 2013 | 2000 Yamaha TT 600 R

1 Answer

I have a kawasaki vn 2000 and oil is come out of the breather in the air filter. I have changed the oil and filter but still pouring out


Hi Fdave376, oil leaking from your air cleaner is caused by oil carryover from the engine. For what ever reason the breather system is not separating enough oil mist and air from the piston downstroke. There are cheap and quick easy fixes and there are more expensive ones. Start by trying the following:
1. Run your oil level half way between the add and full mark when hot.
2. Run oil breather lines from the head into a TEE fitting below carb/induction module then a single line into a mini filter under the frame.
3. Purchase Arlen Ness Super Sucker.
4. Replace umbrella valves and realign oil pump
5. Upgrade oil pump and cam plate
For more information about your question please visit the website below. Good luck and have a nice day.

Mar 03, 2012 | kawasaki VN 2000 Motorcycles

1 Answer

I have a VR508 VCR. The VCR is attached to a satellite dish. The question is: They are asking for a code number to program the remote to control a VCR. Thank you


Sounds like this is a "universal" remote you've bought to replace an original one?
An info leaflet or booklet that should have come with it will list the right code for the VCR - unless it's too old.
If you don't have this booklet go to the maker's website where easy to follow steps should soon make the booklet viewable and/or available to download and print.

Sep 20, 2011 | RCA VR508 VCR

1 Answer

Where can I get new Oil Pump


Hi Loukit18,
#1) You can purchase or order the oil pump you need from the manufacturer or any small engine repair shop.
#2) I recommend that you support your local small engine repair shop and get to know them personally.

#3) Make sure you clean your oil reserve tank and orpheus with lite oil. always wear safety glasses when working on this project.

Notes (*Most oil pumps are easy to install. If you need help with this proceedure, please ask your questions @ FIXYA.COM)

( Advanced Mechanic note: Clean the oil tank and oiling Orpheus with a mix of 50/50 gas and oil. Drain and air dry for 30 minutes before using)

Thank You for using FIXYA.COM
Floman

Feb 19, 2011 | Garden

1 Answer

Mixture 0f gas and oil


Go to your supply store and purchase one small bottle or plastic container of 50 to 1 oil. 40 to 1 is ok too - then purchase one gallon plastic can - put the bottle into the one gallon gas can and add the gas - shake and use.

This is the easy way.

Gary @ Fix Ya

Sep 09, 2010 | Craftsman Garden

1 Answer

I have a NorthStar M157471A. What weight oil goes in the pump?


I just answered that question on another thread... will repeat:

Oil used in engine is SAE30, I would suggest adding bit of Nulon or similiar Teflon based before even first run as it will extend life of the engine, This is air cooled Honda and therefore overheat easy.

Oil used in pump is Universal Tractor Transmission Oil.

Except two, all pumps are equiped with sight glass, fill as indicated on sight glass or dipstick.

To extend life of your equipment, change oil in both, engine and pump after 50hrs.

If you live in colder climates, where freezing is possible, do not forget to drain pump and high pressure hose from water to avoid winter damage.

Hope this will help keep your equipment in top notch for years to come:-)

Jul 11, 2010 | Northstar Pressure Washer 3000 PSI

4 Answers

I have a PHILIPS SRU3004/27 Universal 4in1 remot


005,014,015,018,019,036,041,044,053,075,076,077,087,103,114,212,216,223,228,229,233,231,235,236,236

Mar 14, 2010 | Televison & Video

1 Answer

I found a haier tv. problem is no remote. if i bought a universal remote wat r the codes to program the universal remote to the tv or is there a way to select video 1 or video 2 with out it?


I own a One-for-All universal remote (model URC-4220) which works with Haier TVs. The remote comes with a booklet with a list of setup codes.
In order to determine if you can change things manually, you would need to push any buttons on the TV, and see if VIDEO 1 or VIDEO 2 appears on the screen. If nothing like this happens, then you need to buy a universal remote.
I purchased my remote at Walmart, for less than 10 dollars.















Jul 09, 2008 | Televison & Video

1 Answer

Universal Remote Control


Try these codes 000,008,009,011,012,027,038,068,086,089,091

Dec 09, 2007 | RCA Universal Remote 3 Device Remote...

Not finding what you are looking for?
Annovi Reverberi RMV2.5G27D Pressure Washer Pump Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Annovi Reverberi Garden Experts

Bill Boyd

Level 3 Expert

42818 Answers

jeff chenault
jeff chenault

Level 2 Expert

195 Answers

Keith Poitier

Level 2 Expert

106 Answers

Are you an Annovi Reverberi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...