Question about Tippmann 98 Custom Act Paintball Gun

1 Answer

I attempted to put a car stock on my Tippmann 98 custom and took apart the gun but the stock didnt fit, now when i put it back together and shot it with my tank connected the gun wont stay cocked and little CO2 is coming out with each shot the sound is very low as opposed to my other Tipmann 98 custom where its loud and stays cocked. What do i do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Check the O rings on the big metal striker, make sure that you have the spring on the back (where the stock would have went) in the right hole on the back plate. Make sure that your velocity is set to a reasonable level.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Rear Bolt wont **** fully


it sounds like your bolt is upside down try rotateing it 180 degrees

Dec 31, 2012 | Tippmann 98 Custom Act Paintball Gun

1 Answer

I have a tippmann custom pro with a cyclone feeder. I recently got the SAW stock to put on it and encountered some problems many times after I reassembled the gun. I took it apart at least 5 times before...


Hi there. Tippmann markers are super tough to make sure that they are put back together properly. The stupid clamshell design plus all the little, under engineered parts make it difficult to get it back together properly, especially after installing a stock. I was in the paintball industry for 10 years but have been out of it for a little bit, but i was one of the founding members of Uprising Nation and was a gunsmith/ salesman for PaintballOnline.com / Xtremes. Now with that said...I even had trouble with the tippmann 98's...and I can rebuild an autococker with my eyes closed but can sometimes be stumped by the tippy's bad design. It is really tough to diagnose an issue on these guns without looking at it. You may have the ball detent backwards,l missing a pin, sometimes the after market stocks on those are a little too large on the outside diameter preventing the internals from properly seating. The cycloce system may be off due to the valves not meing properly aligned or the connecting rod not being in all the way. Many times though it is incorrect installation of the detent or the deternt gets damages. That little orange peice of **** flap is a mance. I would start there.

It may seem like i am bashing your gun. Im not... Once they are put together properly they work great. Just DONT TAKE THEM APART. lol. If you buy the parts at a local gun shop they will install them for free.

lol I have 6 guns for sale :)


Have a good day

Apr 10, 2011 | Tippmann 98 Custom Pro Act Paintball Gun

1 Answer

My 98 custom is not semi-automatic like it should be. I have to re-**** it after every shot, i have tried oiling everything really good, replaced o-rings and many others. Any ideas??


Hello
I had the same problem with an old one and i took the gun apart and the driver spring was an inch shorter than a new spring so i carefully streched it out so it was the same length as a new one.
it works great now.

Jan 28, 2011 | Tippmann 98 Custom Act Paintball Gun

1 Answer

When I try to **** my gun, the valve makes a cracking noise, and doesn't move.


Sounds like it is put together wrong. Take it apart and follow the diagram to put it back together
or head to your local shop and have them help you. Make sure to oil the internals.
Here is your manual.
http://www.tippmann.com/pdfs/products/A5/a5manual.pdf

Jan 06, 2011 | Tippmann 98 Custom Act Paintball Gun

1 Answer

Can you give me information on how to put back togather my tippmann 98 custom.


Kind of a loaded question there josh.

There should've been a user guide with your marker and if not, you can find one online at Tippmann's website that will give you a picture of how it all fits together. It's a very simple and reliable marker that you'll find dependable with the proper maintenance.

Good luck!

Play hard, play safe, play with honor!

8^)

Sep 03, 2010 | Tippmann A 5 Standard Paintball Gun

1 Answer

Took it apart and don't know how to reassemble


How To reassemble an Army alpha black paintball gun.

Apr 23, 2010 | Tippmann 98 Custom Act Paintball Gun

1 Answer

Model 98 rap 4 stock issue


yes . take your time and sand to fit,

Jan 09, 2010 | Tippmann 98 Custom Act Paintball Gun

Not finding what you are looking for?
Tippmann 98 Custom Act Paintball Gun Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tippmann Sport & Outdoor - Others Experts

spank61

Level 2 Expert

97 Answers

Brad Brown

Level 3 Expert

15557 Answers

Vickie Miller
Vickie Miller

Level 1 Expert

6 Answers

Are you a Tippmann Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...