Question about Raypak HEATER HEADER GASKETS (SET OF 9)

Open Question

Can,t find head gasket set for husqvarna smc 125

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gilera vx 125 head gaskets gone


If you decide to go to a garage they will charge you a little fortune if you need help with this let me know i have done these engines before few hours of work. Who told you the gasket has gone? some times the head cracks and oil mixes with water. Thanks

Sep 07, 2012 | 2005 Gilera Runner VX 125

2 Answers

I have a 1987 kx 125 just put topend gasket set in with piston and rings and coolent is getting in the case bottom end anyone know why plz help me


It sounds as if you have rebuilt the engine without torqueing the head bolts. Although, it could be that the cylinder base gasket has been torn during the rebuild. Try to re-tighten the head bolts to the correct settings first. Good luck.

May 23, 2012 | 2003 kawasaki KX 125

1 Answer

Deristrict kymco Stryker 125


there are different methods of restricting, hear we 1. gasket between the carb and inlet. ". gasket between the exhaust and head, 3. washer in the output sprocket to drive to wheal in the centrifugal clutch Re: Jeff

Apr 12, 2012 | 2001 Kymco Stryker 125

1 Answer

Husqvarna Hand held blower. Model # 125-B No Spark


husqvarna model 125b weed trimmer what spark plug do i use manual says rcj-6y in technical data and rcj-8y in monthly maint. ????

Jul 21, 2011 | Husqvarna 125bvx Hand Held Blower Vac

1 Answer

I have a TM 125 and the radiator water leaks into the motor oil what do i need to fix this


That is a classic symptom of a leaky head gasket. You will need to change this asap to prevent further damage to your engine. You would be as well do ing a piston and base gasket change while your at it. And remember to get a new set of cylinder head bolts, for when you put it all back together again.

Cheers,

Andy....

Nov 08, 2010 | 2002 TM Racing MX 125

1 Answer

Aprilia rs 125 top end torque settings


Hi, Tom_ass23 I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD 2006 Aprilia Rs 125

Jun 19, 2010 | 2006 Aprilia RS 125

1 Answer

Torque settings for the head bolts on a 1984 xc 125 husky


The stud is 8mm with 1.25 thread. the torque, according to the service manual, is 19.6 to 21.6 Nm or 2.0 to 2.2 Kgm or 14.5 to 15.9 lb/ft.. It all depends on your favorite language.

Please take a moment to rate this answer. Thanks silverfernwe!

Apr 15, 2009 | 2001 Husqvarna SM 610 S

1 Answer

Lots of smoke


When you rebuilt it, I would assume that you replaced the piston rings. Were they installed correctly? Assuming they were, were the valves cleaned and the valve seals replaced? You obviously are getting oil into the cylinder(s) somehow, and these are usually the main culprits. Unless the head gasket has developed a leak.

Jan 17, 2009 | 2008 Husqvarna CR 125

1 Answer

Presure in raidiator


I know you said you did the head gasket, but it really sounds like a head gasket issue and pressure getting from the cylinder into the colling system. If you've had recurring overheating that necessitated another gasket replacement you'll likely have a warped head, which could explain the recurring t symptoms despite changing the gasket.

I'd do a compression test with the radiator cap off and see if you're losing compression. You'll likely need to have the head machined to remove the warping. Once machined and replaced with a good Yamaha brand gasket and a high temp sealant to help it, you should be okay. Be sure to torque the head bolts exactly in the order required and to the exact level required by the factory.

Hope this helps.

Dec 28, 2008 | 2006 Yamaha DT 125 X

Not finding what you are looking for?
Raypak HEATER HEADER GASKETS (SET OF 9) Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raypak Pool & Spa Experts

Bill Jordan

Level 2 Expert

372 Answers

paulcarew

Level 3 Expert

2458 Answers

Brad Brown

Level 3 Expert

15451 Answers

Are you a Raypak Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...