Question about Computers & Internet

2 Answers

I ran chkdsk but it came back with errors. I am unable to run disk defragmenter because it said that I had a scheduled chkdsk /f scheduled to run.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 748 Answers

Restart the machine. It will run checkdisk during boot (long) and afterwards when it boots to \Windows you'll be able to run defrag.

Posted on Oct 02, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Restart Windows by removing extra's hardware devices connected then you will find the option with start wilth last known good configuration. If not working then use windows cd to restore windows priviously.

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Disk fragment


You need to run chkdsk...

How to run Chkdsk

Notes

Chkdsk requires exclusive access to a volume when it runs. Therefore, if one or more of the files are open on the disk that you want to check, Chkdsk displays a prompt asking if you want schedule the disk check for the next time that you restart your computer.
Chkdsk might take a long time to run, depending on the number of files and folders, the size of the volume, disk performance, and available system resources, such as processor and memory.
Chkdsk might not accurately report information in read-only mode.

How to run Chkdsk at the command prompt

Click Start, and then click Run.
In Open, type cmd, and then press ENTER.
Use one of the following procedures:
To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

How to run Chkdsk from My Computer or from Windows Explorer

Double-click My Computer, and then right-click the hard disk that you want to check.
Click Properties, and then click Tools.
Under Error-checking, click Check Now. A dialog box that shows the Check disk options is displayed,
Use one of the following procedures:
To run Chkdsk in read-only mode, click Start.
To repair errors without scanning the volume for bad sectors, select the Automatically fix file system errors check box, and then click Start.
To repair errors, locate bad sectors, and recover readable information, select the Scan for and attempt recovery of bad sectors check box, and then click Start.
Note If one or more of the files on the hard disk are open, you will receive the following message:
The disk check could not be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files can be accessed by restarting Windows. Do you want to schedule the disk check to occur the next time you restart the computer?
Click Yes to schedule the disk check, and then restart your computer to start the disk check.

The following table lists the exit codes that Chkdsk reports after it has finished:
Exit code Description
0 No errors were found.
1 Errors were found and fixed.
2 Disk cleanup, such as garbage collection, was performed, or cleanup was not performed because /f was not specified.
3 Could not check the disk, errors could not be fixed, or errors were not fixed because /f was not specified.

Aug 19, 2012 | Computers & Internet

1 Answer

Bad sector issue


You need to run chkdsk...

How to run Chkdsk

Notes

Chkdsk requires exclusive access to a volume when it runs. Therefore, if one or more of the files are open on the disk that you want to check, Chkdsk displays a prompt asking if you want schedule the disk check for the next time that you restart your computer.
Chkdsk might take a long time to run, depending on the number of files and folders, the size of the volume, disk performance, and available system resources, such as processor and memory.
Chkdsk might not accurately report information in read-only mode.

How to run Chkdsk at the command prompt

Click Start, and then click Run.
In Open, type cmd, and then press ENTER.
Use one of the following procedures:
To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

How to run Chkdsk from My Computer or from Windows Explorer

Double-click My Computer, and then right-click the hard disk that you want to check.
Click Properties, and then click Tools.
Under Error-checking, click Check Now. A dialog box that shows the Check disk options is displayed,
Use one of the following procedures:
To run Chkdsk in read-only mode, click Start.
To repair errors without scanning the volume for bad sectors, select the Automatically fix file system errors check box, and then click Start.
To repair errors, locate bad sectors, and recover readable information, select the Scan for and attempt recovery of bad sectors check box, and then click Start.
Note If one or more of the files on the hard disk are open, you will receive the following message:
The disk check could not be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files can be accessed by restarting Windows. Do you want to schedule the disk check to occur the next time you restart the computer?
Click Yes to schedule the disk check, and then restart your computer to start the disk check.

The following table lists the exit codes that Chkdsk reports after it has finished:
Exit code Description
0 No errors were found.
1 Errors were found and fixed.
2 Disk cleanup, such as garbage collection, was performed, or cleanup was not performed because /f was not specified.
3 Could not check the disk, errors could not be fixed, or errors were not fixed because /f was not specified.

Jun 30, 2012 | Western Digital Caviar Computers &...

1 Answer

Windows can't recognize


You need to run chkdsk......

How to run Chkdsk

Notes

Chkdsk requires exclusive access to a volume when it runs. Therefore, if one or more of the files are open on the disk that you want to check, Chkdsk displays a prompt asking if you want schedule the disk check for the next time that you restart your computer.
Chkdsk might take a long time to run, depending on the number of files and folders, the size of the volume, disk performance, and available system resources, such as processor and memory.
Chkdsk might not accurately report information in read-only mode.

How to run Chkdsk at the command prompt

Click Start, and then click Run.
In Open, type cmd, and then press ENTER.
Use one of the following procedures:
To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.

Note If one or more of the files on the hard disk are open, you will receive the following message:
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

How to run Chkdsk from My Computer or from Windows Explorer

Double-click My Computer, and then right-click the hard disk that you want to check.
Click Properties, and then click Tools.
Under Error-checking, click Check Now. A dialog box that shows the Check disk options is displayed,
Use one of the following procedures:
To run Chkdsk in read-only mode, click Start.
To repair errors without scanning the volume for bad sectors, select the Automatically fix file system errors check box, and then click Start.
To repair errors, locate bad sectors, and recover readable information, select the Scan for and attempt recovery of bad sectors check box, and then click Start.
Note If one or more of the files on the hard disk are open, you will receive the following message:
The disk check could not be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files can be accessed by restarting Windows. Do you want to schedule the disk check to occur the next time you restart the computer?
Click Yes to schedule the disk check, and then restart your computer to start the disk check.

The following table lists the exit codes that Chkdsk reports after it has finished:
Exit code Description
0 No errors were found.
1 Errors were found and fixed.
2 Disk cleanup, such as garbage collection, was performed, or cleanup was not performed because /f was not specified.
3 Could not check the disk, errors could not be fixed, or errors were not fixed because /f was not specified.

Jun 30, 2012 | Western Digital Caviar Computers &...

3 Answers

When I try to defrag my pc I get a message that says "Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume (C:). Please run CHKDSK/f. Don't know how to do this


above statements are right you may also run disc defrag to your system
click start/controlpanel/Administrative Tools/computer management/storage/disk defragmenter
then select or highlight the drive where your operating system is installed
click defragment

Sep 10, 2011 | E-Machines eMachines Desktop PC

1 Answer

My computer crashes a lot. How do I fix?


You may run or perform Disk Error Checking(This is for Windows XP SP3):
* Chkdsk (Chkdsk.exe) is a command-line tool that checks volumes for problems. The tool then tries to repair any that it finds. For example, Chkdsk can repair problems related to bad sectors, lost clusters, cross-linked files, and directory errors.

** How to run CHKDSK at the command prompt:
  1. Click Start, and then click Run.
  2. In Open, type cmd, and then press ENTER.
  3. Use one of the following procedures:
  • To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
  • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.

    Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)

  • Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.
  • Once done with chkdsk r, run FIXBOOT and press ENTER.

    Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
  • Sep 08, 2011 | Dell Dimension 4600 PC Desktop

    1 Answer

    Hello my acer laptop is giving a message disk error hit alt ctr del for start up i do that but the screen stays black with a with small white blink - in the left hand upper corner


    How to run Chkdsk loadTOCNode(2, 'moreinformation'); Notes
    • Chkdsk requires exclusive access to a volume when it runs. Therefore, if one or more of the files are open on the disk that you want to check, Chkdsk displays a prompt asking if you want schedule the disk check for the next time that you restart your computer.
    • Chkdsk might take a long time to run, depending on the number of files and folders, the size of the volume, disk performance, and available system resources, such as processor and memory.
    • Chkdsk might not accurately report information in read-only mode.
    How to run Chkdsk at the command prompt loadTOCNode(3, 'moreinformation');
    1. Click Start, and then click Run.
    2. In Open, type cmd, and then press ENTER.
    3. Use one of the following procedures:
      • To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
      • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.

        Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
      • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.

        Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
    How to run Chkdsk from My Computer or from Windows Explorer loadTOCNode(3, 'moreinformation');
    1. Double-click My Computer, and then right-click the hard disk that you want to check.
    2. Click Properties, and then click Tools.
    3. Under Error-checking, click Check Now. A dialog box that shows the Check disk options is displayed,
    4. Use one of the following procedures:
      • To run Chkdsk in read-only mode, click Start.
      • To repair errors without scanning the volume for bad sectors, select the Automatically fix file system errors check box, and then click Start.
      • To repair errors, locate bad sectors, and recover readable information, select the Scan for and attempt recovery of bad sectors check box, and then click Start.
      Note If one or more of the files on the hard disk are open, you will receive the following message: The disk check could not be performed because the disk check utility needs exclusive access to some Windows files on the disk. These files can be accessed by restarting Windows. Do you want to schedule the disk check to occur the next time you restart the computer?Click Yes to schedule the disk check, and then restart your computer to start the disk check.
    The following table lists the exit codes that Chkdsk reports after it has finished:
    Collapse this tableExpand this table Exit code Description 0 No errors were found. 1 Errors were found and fixed. 2 Disk cleanup, such as garbage collection, was performed, or cleanup was not performed because /f was not specified. 3 Could not check the disk, errors could not be fixed, or errors were not fixed because /f was not specified.
    courtesy of Microsoft.com

    Oct 14, 2010 | Acer Aspire 5315 Notebook

    1 Answer

    Disk defragmenter has detected that chkdsk is scheduled to run on volume : (c:) Please run chkdsk/f.


    If you want to do Disk defragmentation Plus Check Disk, " PerfectDisk 10 Professional" is what I recommend.

    Here is the download page

    Please fill the rewuired form with your E-mail address and your country.

    Press download.

    That's it.

    Dec 27, 2009 | HP Compaq Presario V3016US Notebook

    2 Answers

    Can not use defragmenter on computer. Windows XP system, when I try to defrag I get a message disk defrag has detected that chkdsk is scheduled to run on the volumn:(c:) Please run chkdsk/f. When I try...


    Hello,
    Manual steps to run Chkdsk at the command prompt
    Click Start, and then Run.
    In Open, type cmd, and then press ENTER.
    Use one of the following procedures:
    To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
    To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.
    Note If one or more of the files on the hard disk are open, you will receive the following message:
    Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
    To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.
    Note If one or more of the files on the hard disk are open, you will receive the following message:
    Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check
    check additonal instructions on:
    http://support.microsoft.com/kb/315265

    This will help you to solve the problem

    Aug 30, 2009 | Computers & Internet

    2 Answers

    Unable to run disk fragmenter


    It seems the chkdsk is not completing hence the problem. What version of Windows are you running? Do u have the installation cd with u?

    Mar 11, 2009 | Dell Pentium 4, 2.26 GHz (1W391)

    4 Answers

    Can't get to disk defragment my laptop



    How To: Fix Windows Built in Defragmenter
    Had the same problem, turns out that in SP2 you have to have "DCOM Server Process Launcher" enabled in administrative tools> services for the


    · First open up a Command Prompt, this can be found at:
    Start -> All Programs -> Accessories -> Command Prompt

    · Change into your windows\system32 directory. Your windows directory will be either windows or winnt. Type:
    cd \windows\system32

    Register the defrag components, by typing:
    regsvr32 dfrgsnap.dll
    regsvr32 dfrgui.dll



    At this stage, you may find the defragmenter works. If not, there is one more step you can do.

    Using Windows Explorer browse to your windows\inf folder.
    In there you will find a file called
    dfrg.inf right click this file, and select Install.

    If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
    Thanks, Joe

    Nov 19, 2008 | Dell Latitude D600 Notebook

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    26 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...