Question about Dishwashers

1 Answer

I have a Whirlpool adp 5656 and the green light on the front is flashing and it wont go into a wash cycle. The common answer to this is to switch the machine from cycle to heat mode and it will reset however this machine doesnt have those facilities, can you help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 17,130 Answers

You seem to have the question and the answer but I think this is more than a reset. you will have to observe when the fault happens to arrive at the solution.
Check if the inlet flow is good there is no dirt inthe filter, the water levvel pressure sensor is working, then the motor starts the wash cycle to later go to drain. now in this process if there is any input error, even the door switch being faulty and opening in vibration the board can hang up.
It can also be the faultt of the board itself . so take a check on these tips.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Duet Gas Dryer, runs about 2 seconds then shuts down. Time remaining display flashes


raoul answered just now
come fare il reset della scheda della lavastoviglie whirlpool ADP 5555 per cancellare un errore dovuto a sensore sporco? non vorrei chiamare l assistenza solo per questo.
Grazie

Feb 06, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool adp 9411


If this is the machine with just a knob for the wash cycles, and one button to start the wash cycle, you will have to replace the timer. There is no reset that I know of.

Dec 16, 2013 | Dishwashers

2 Answers

Whirlpool adp 6600 will not function start light is just flashing


Whirlpool adp 6600 will not function start light is just flashing. Waht di I do?

Sep 17, 2009 | Whirlpool 24 in. ADP6940 Dishwasher

3 Answers

Dishwasher (Whirlpool ADP 952) not working


I have a whirlpool ADP 952 and the start button is flashing and it won't work

May 25, 2009 | Dishwashers

1 Answer

Whirlpool Dishwasher ADP 4601 , Light flashing constantly.


There is a switch attached to the door latch that may need to be replaced. (the switch is inside the door).

Feb 08, 2009 | Kitchen and Much More Dishwashers

1 Answer

My dishwasher model adp 941 won't start - start led flashes


exactly the same problem today with an AD9520

Don't know the cause but from reading other posts re dishwasher problems I tried holding start but on for 5 - 10 seconds and it seemed to clear the symptoms at least. It ran for a short while and stopped but the flashing had stopped and I could start a wash cycle which is now running!

Dec 14, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Washing machine


bottom right corner behind the little door

Sep 27, 2008 | Whirlpool AWM5125/1 Front Load Washer

1 Answer

WHIRLPOOL ADP 8540 dishwasher has blinking light on all the time (blinking in cycles of 4). When you turn it on (by holding the button down for around 4 seconds) it wont complete the cycle and you need to...


WHIRLPOOL ADP 8540 dishwasher has blinking light on all the time (blinking in cycles of 4). When you turn it on (by holding the button down for around 4 seconds) it wont complete the cycle and you need to keep restarting it. can anyone let us know what the problem may be. Thank you

Jul 17, 2008 | Whirlpool Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Brad Brown

Level 3 Expert

16010 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...