Question about Hotpoint Ultima WD72 Front Load Washer/Dryer

1 Answer

How do i set a 'spin only programme on my hotpoint ultima extra washing machine

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 19,396 Answers

Hi.

This machine does not allow setting spin without using drying programme or without being in a full cycle.
You can use the cycle G pressing the button 6, 7 and 8 times, please see page 12 in the manual below.

Instead of the spin only program you can als use the independent dry program, as shown at page 11 and 15 of the manual.

Manual available here.



If you repute this solution helpful, then please do not forget to accept the solution.

Many thanks.

Ginko.

Posted on Oct 02, 2010

  • Ginko
    Ginko Oct 02, 2010

    Hi.

    Thanks for the feedback.

    Have a good day.

    Ginko.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint ultima washing machine wma74 drum not turning


If the machine wasn't excessively noisy before and when you select spin only you can't hear the motor running its likely to be the carbon brushes in the motor worn down till they no longer contact stick a new set in if the carbon length sticking out the brass holder is less than around half an inch long

Dec 08, 2013 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

F-04 on hotpoint ultima can you tell what this means please


"F04" on the display panel before the programme ends. Have you cleaned the filter out on the pump

Apr 06, 2013 | Hotpoint Washing Machines

3 Answers

My Hotpoint Ultima WMD 960 displays "F04" on the display panel before the programme ends. Have cleaned the filter and it worked OK in spin mode and finished normally but now have put in a washing load, it...


Error code F04 means pressure switch jammed on empty.
Do the following.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside the hose.
Remove the hose on to the pump, and check for blockage or obstruction here as well.
Please rate my solution.
Thankyou.

Jan 25, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

F8 flashing as about to spin on every programme


F08 is a heater fault so although you may feel the machine has washed it probably has'nt.Check the heater, pressure switch and module for lose or brocken wires.

Jun 25, 2009 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

Will not spin.


could be a couple of causes.First take off panel at back of machine and check that belt is in place.
Has it been noisy on spin lately?

Jan 29, 2009 | Hotpoint WMA64 Front Load Washer

1 Answer

WASHING MACHINE


Turn machine off and unplug for at least ten seconds

Then plug in and retry - according to Hotpoint that should solve problem

Mar 10, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

"Test" displays no washing done!


Your test mode is on, maybe accidently. Press "start", "cancel", "on" & "off" together for 10 secs, you will see d/off come on the display. Do the same & the test mode comes on again.

Rate pl.

Dec 02, 2007 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WD72 Front Load Washer/Dryer Logo

Related Topics:

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5159 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...