Question about Hampton Bay 04379 Madison Avenue Ceiling Fan

1 Answer

Pull cord is stuck on a hampton bay ceiling fan model ac-552

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 116 Answers

Most likely broken. Sometimes you can wiggle and work it loose. If not you can replace the pull chain switch. You will have to (remove power first of course) get to the actual switch. most fans this is relatively easy. Often it is just under the glass light cover. There will be a retaining nut and the switch should come loose. Home depot, lowes, and most hardware stores should have a generic replacement that should fit. you may or may not have to cut the wires to remove the old one, but a couple wire nuts to install the new one and you should be good to go. Hope this helps. If you need further assistance post a reply in the comments, and don't hesitate to leave good thumb rating if you found this helpful. Thanks, and good Luck!

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ceiling fan (mar 1997 "YL") Model AC-552(TA52BB6LK)"BB" motor does not have enough power to turn blades. Is there a Replacement motor available? What Brand is original?


The Hampton Bay fans are inexpensive, yet very good. However, there are not many places that sell replacement parts (other than fan blades, Irons, etc.) motors are hard to find. You might try
http://www.ceilingfanparts.com/index.htm to see if they can help you. Most motors are interchangeable.

Jul 03, 2011 | Hampton Bay Heating & Cooling

1 Answer

I have a Hampton Bay ceil fan model # AC-552 "NN" and the serial # 000371. We had lost power in our neiborhood a while back and was use the generator and when the power came back on our fan didn't work....


Hampton Bay is an exclusive brand of Home Depot. They would be the ones to help you with that. BUT .. from my experience I would say that the cost and trouble of getting and replacing the motor in that fan would be easilly rivalled by the cost and ease of buying and installing a new fan all together.

Please Vote !!

Jun 02, 2010 | Hampton Bay 52 In. White Redington...

1 Answer

I HAVE A HAMPTON BAY MODEL AC-418 CEILING FAN. IT


Your issue is most likely a faulty speed control. The part is integral to the remote receiver in the fan housing. You can purchase spare parts for this fan through Home Depot (Hampton Bay) Service at 800-654-0688.

The fan unit itself is manufactured by AirCool 800-896-4908

May 10, 2010 | Hampton Bay AC418-OBB 60'' Brookedale Oil...

1 Answer

Hampton Bay Ceiling fan will not come on


greetings home electrition
it's most likely the switch has failed
but on rare ocation the switch comes un wired
also somtimes the switches stick they stick in the on or off position
try pulling the chain and listen for the usual click if it aint there then the switch is pooch if click is there start look at the wires failing that replace the switch
there cheep 2-5.00

Jul 29, 2009 | Hampton Bay AC414-LRU 52'' Kemper...

2 Answers

My Hampton Bay Windward II


I need a fan chain pull switch for my Hampton Bay 5 Blade Model 552 od--
SKU # 409-952----
MFG # 5A00007
SER # 720275940415653B
The switch controls High,Medium,Low Speed and Off.
4 Wires--Black,Brown Purple and Gray are connected to awitch, they come from a Block Capacitor (4.5mf,6mf and 5mf)
This fan was purchased around 1995 and is in good condition but needs this replacement switch---
Where can I get the replacement for this model?

Apr 19, 2009 | Hampton Bay 24002 Ceiling Fan

Not finding what you are looking for?
Hampton Bay 04379 Madison Avenue Ceiling Fan Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Dryers Experts

Steve

Level 3 Expert

3287 Answers

Donald Klecher
Donald Klecher

Level 1 Expert

2 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...