Question about Palm Tungsten E2 (Multilingual) Handheld

1 Answer

Connection to my DSL wireless router

I have had my wireless router for a couple of years, but I never used the wireless part of it. (DSL on the sbcglobal.net domain) When we installed the DSL, we password protected (locked out, I thought) the wireless part because we had nothing that would use that feature. Then I got this E2. I tried to connect to my router, and I can see it on the selection screen, but I cannot access it. I can connect to a couple of others in the neighborhood, from time to time, because they do not have the little padlock on the right side. By the way, we just got a laptop with wi-fi, and I can connect to the router with it just fine. It appears that I do not understand the questions that the Palm is asking me, and I am giving it the wrong answers. Thank you so much.

Posted by on

  • jctotten Jan 10, 2009

    i also have a palm tungsten e2 and i cannot get the web. what do i need to do?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

What type of router do you have (e.g. Netgear, BT, Orange)
Some routers like orange need a disc to be inserted into the device to be used as the security key is either not what it says it is or a whole page long!

Posted on Mar 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to connect to internet via a notebook's wireless for HTC G1?


If you are looking for your laptop to do web via the phone, this is what you are looking for...

http://graha.ms/androidproxy/

IF you are trying to do Terminal Services or mail clients or non web TCP/IP, there should be some apps coming out soon for general IP stuff...

Ray

Jan 03, 2009 | HTC G1

1 Answer

I CANT CONNECT TO MY WIFI NETWORK


Here is the information I found for you on how to connect to wireless:

The well-connected JAQ3 has both WiFi 802.11b/g and Bluetooth 1.2. You'll manage these using i-mate's Wireless Manager (accessible by tapping the strength meter on the Today Screen taskbar). WiFi supports the faster g standard and the device will connect to routers running in "g only" mode. Unfortunately, in our speed tests the JAQ3 got slow results when browsing over an 802.11g connection and DSL Reports speed tests showed an average of 340k which isn't as good as 3G and EVDO in many areas. In contrast, we get up to 1250kbit/s with the T-Mobile Dash and 1500kbit/s with the HTC TyTN over WiFi using the same router and speed test. I-mate includes a WLAN monitoring application that provides current connection information including SSID, channel, Tx rate, MAC address, signal strength and it allows you to set power savings as well as WiFi radio timeout.
The JAQ3's Bluetooth 1.2 radio uses Microsoft's basic Bluetooth software and stack. It supports a wide range of profiles including A2DP (stereo audio), AVRC (AV Remote Control, using for controls on Bluetooth stereo headsets), hands-free, HID (keyboards and mice), BIP (printing over Bluetooth), SAP, serial port, object push, DUN and ActiveSync. Nice! We tested DUN and it worked well. Headsets were another matter, with relatively poor range with our selection of headsets including the Scala-700 and Samsung WEP200. Audio quality wasn't the best either with minor drops in audio and echo on the caller's end.

Dec 22, 2008 | i-mate JAQ3 Smartphone

1 Answer

I M USING I-MATE JAQ3...I CANT CONNECT IT TO MY WIRELESS NETWORK.. HELP ME WITH THIS..AND ALSO I AM NEW TO THIS POCKET PC.. SO GIVE THE SOLUTION IN DETAIL


Here is the information I found for you concerning how to get wireless on your I-Mate

The well-connected JAQ3 has both WiFi 802.11b/g and Bluetooth 1.2. You'll manage these using i-mate's Wireless Manager (accessible by tapping the strength meter on the Today Screen taskbar). WiFi supports the faster g standard and the device will connect to routers running in "g only" mode. Unfortunately, in our speed tests the JAQ3 got slow results when browsing over an 802.11g connection and DSL Reports speed tests showed an average of 340k which isn't as good as 3G and EVDO in many areas. In contrast, we get up to 1250kbit/s with the T-Mobile Dash and 1500kbit/s with the HTC TyTN over WiFi using the same router and speed test. I-mate includes a WLAN monitoring application that provides current connection information including SSID, channel, Tx rate, MAC address, signal strength and it allows you to set power savings as well as WiFi radio timeout.
The JAQ3's Bluetooth 1.2 radio uses Microsoft's basic Bluetooth software and stack. It supports a wide range of profiles including A2DP (stereo audio), AVRC (AV Remote Control, using for controls on Bluetooth stereo headsets), hands-free, HID (keyboards and mice), BIP (printing over Bluetooth), SAP, serial port, object push, DUN and ActiveSync. Nice! We tested DUN and it worked well. Headsets were another matter, with relatively poor range with our selection of headsets including the Scala-700 and Samsung WEP200. Audio quality wasn't the best either with minor drops in audio and echo on the caller's end.

Dec 22, 2008 | i-mate JAQ3 Smartphone

7 Answers

Wireless internet


Basicly the wireless router needs to be connected into the internet, then you will be able to connect to it. You need to install the card and make sure it works in your device, then connect into the router and it should work fine.

Oct 27, 2008 | NEC MobilePro 900 Handheld

1 Answer

Connecting a Ipaq RX3715 to a wireless router


First, you have to be sure your ipaq has wi-fi feature is on and you can check on network connectivity option for any wrong setup there. According to your information, your ipaq is not recognized by your router and I agreed that your router is working normally. Try to reboot your ipaq and be sure to get wi-fi to turn on and try to connect it again. I have my Dell Axim also used Windows Mobile like Ipaq and it connected easily with no issue. The message in your to show me that you need first to identify your ipaq before you you can get it to connect to your network. I hope this help.

Mar 05, 2007 | HP iPAQ RX3715 Pocket PC

3 Answers

Wireless router


No, but if you hook up a computer connecting to the internet through that phone line to the router, i think you can share that internet connection with the pocketpc. Reply With Quote

Sep 11, 2005 | Toshiba e400 Pocket PC

1 Answer

Internet connection at my e830


To configure the Wireless connection you can use the Wifi connection wizard or setup the connection manually. I hope that you have checked your workgroup too. Also you should check if your IP settings are the same at the router and PDA (dynamic and static IP)! If you have some another device connected to the router remember them when you setup the PDA connection! In the end the MAC address of the PDA WLAN card must be saved in the router!

Sep 08, 2005 | Toshiba e830 Pocket PC

1 Answer

Wi-Fi


You will not believe me but I have a similar problem. I have also Belkin router at home and wireless connection with my e800 works perfect. A few days ago I have tried to connect my PDA to wireless router of my best friend. His wireless network is protected like mine and after configuration of all settings I had no success. The funny thing is that PDA show me the status CONNECTED but I can not use the internet explorer. Like I said, at home with my Belkin it works properly. I can really not explain what the problem is.

Sep 08, 2005 | Toshiba e740 Pocket PC

2 Answers

Hx2410 general wi-fi questions


Have you been able to connect through your router at home? I'd get that set up and running first. Then doing it on the road will merely be variations on a familiar theme. If you've tried at home but it hasn't worked, let us know something about your home network (what kind of router? using security/encryption?), and about what you've already tried so we can try to help.

Sep 08, 2005 | HP iPAQ hx2410 Pocket PC

1 Answer

Wireless connections to Desktop


If you have a Windows 2000 or XP machine you use the Remote Desktop feature to display the desktop on the P/PC. I think you need to download this from Microsoft. http://www.microsoft.com/mobile/han...alserver/ts.asp The link is hidden in "licence requirments." I use this feature over my network on my desktops. Tough I'm looking for a P/PC to use myself, instead of getting a new laptop. Don't think about playing games or videos, though :)

Sep 06, 2005 | Casio Cassiopeia E-200 Pocket PC

Not finding what you are looking for?
Palm Tungsten E2 (Multilingual) Handheld Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm PDAs Experts

MUSTAFA BULENT...
MUSTAFA BULENT...

Level 2 Expert

166 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Are you a Palm PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...