I CANT GET MY GIGAWARE WIRELESS CONTROLLER FOR PS3 TO WORK.

Try plugging it into another computer USB to see if it recognizes a device. If not, its dead. If yes you may want to see if there is a software update for your PS3.

if u can connect a usb cable to the controller and ur ps3 it should work thats what i d id with mine good luck.

If your PS3 version is 3.5 or higher, it will not work. I just recently replied to a similar post about this problem. If you have upgraded to version 3.5 or higher, it overwrites third-party firmware that gigaware controllers use. Making the controller useless. I prefer to get controllers that are actually made by Sony themselves, not ones from gigaware etc.

I'm guessing you haven't paired the controller to the system yet. If you look under section 04 in the little black book that came with the PS3 it tells you how to pair them so every time you turn the PS3 on it will pick up the signal of the sixaxis assigned to that slot. I had some of the same problems you did until I read up on it. If you have already done this I apologize but that's all I can think of.
hope this helps.

If you have updated your PS3 to version 3.50, it overwrites a third-party firmware the gigaware controller uses. Therefor, making it impossible to connect. This just happened to me not long ago, very dissapointed in it. There is no way to roll-back your PS3 version, unless you can get Sony to give you a roll-back code.

Try connecting it with the usb cable. if it works it might be a fault with the ps3 bluetooth module

I can not locate a Remote For PS3 By Gigaware now if its a controller Follow these steps

Connect to PS3
1. Turn on your console and plug the receiver into the first port on the console. The RX indicator on the receiver flashes.
2. Slide POWER ON/OFF to ON to turn on the controller. The controller’s POWER indicator lights and the 4 port indicators flash.
3. The controller connects with the receiver automatically after about 3 seconds. If successful, the RX indicator on the receiver lights.
4. Press the PS button to assign a controller number. The corresponding port indicator lights.
Manual Search
If you are unable to automatically connect, try manual adjustment.
1. Repeat steps 1 and 2 under “Connect to PS3.”
2. Press CONNECT on the receiver. The RX indicator flashes.
6
3. Press and hold SELECT and L3 (left analog stick) on the controller simultaneously for at least 3 seconds. When the RX indicator stays lit, release SELECT and L3.
4. Press the PS button to assign a controller number. The corresponding port indicator lights.
n Notes:
• Repeat “Connect to PS3“ or “Manual Search“ if the connection fails again.
• If you purchase a new receiver for the controller, but have previously been using it with the supplied receiver, you will have to follow connection steps again.
Reassigning a controller number
1. Press and hold the PS button for one second. The functional screen displays. Select “Controller Settings”, then “Reassign the controller.” Press X to confirm.
2. Use the D-pad to select the number that matches the controller’s port.
3. Press X again to confirm. The corresponding port indicator lights up.
7
Connect to PC
1. Plug the recevier into a PC’s USB port. The receiver’s RX indicator flashes.
2. Slide POWER ON/OFF to ON to turn on the controller. If connection is successful, the RX indicator on the receiver lights and the 4 port indicators on the controller turn off.
Test the controller
1. Open the control panel on your PC, and double-click “Game Controllers.” Then click “Properties“ and the testing screen appears.
2. Press the buttons of the controller. After testing, press OK to exit. You are now ready to play games.
Troubleshooting
If the controller stops working at any time, or will not connect to PS3 or PC, follow “Manual Search“ steps on pages 5-6.

should be able to simply plug in usb receiver(sensor) put batteries in mouse press connect on receiver then press connect on mouse, maybe unplug your existing mouse

If they work wired and not wirelessly then you might have a problem with your wireless access module. Can you access the internet through your PS3?

Yes the gigaware will work with the PS3.