Question about Daewoo DSA-122L Air Conditioner
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can get the parts from the below sites:
If you need anymore help let me know.Please don't forget to rate or accept the previous premium solution.
Posted on Jun 22, 2008
They make a few different 12,000btu models.
Click HERE for the manufacturer's web page to select and download your specific manual.
These error codes are not available in the manual.
Please contact them Monday through Friday, between 8:30 am - 4:30 pm PST,
Toll Free 1-800-405-2943 Inside the US
1-310-827-8615 Outside the US
Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.
Posted on Jul 28, 2009
This alarm state is a CH 06 alarm.
Indication for the Indoor unit pipe temperature sensor (thermister) not plugged in or out of calibration.
This alarm will also occur when the unit gas charge is to low and the indoor unit temperature reached a temperature of -5°C for longer that 30 sec. It will switch the machine off.
Posted on Mar 22, 2010
Tips for a great answer:
Feb 02, 2016 | LG LS-L1210HL 12000 BTU Heat and Cool Mini...
Oct 13, 2015 | Whynter ARC-12S ECO-FRIENDLY 12000 BTU...
Jul 23, 2015 | Norpole 12000 BTU Window Air Conditioner...
Jul 20, 2015 | Sunpentown Spt Tn-12e Technitrend...
Jun 07, 2011 | Heating & Cooling
Apr 17, 2011 | DeLonghi PAC C120 12000 BTU Portable Air...
I am not an expert but I have two of the remote controlled 8000 BTU units and one of the 12000 BTU units like this one.
I have found that the remote controlled Whirlpool units that used this type of electronics sometime had a problem with cold solder joints on the motor control board. This is the board that has the relays that control the fan speed and compressor. Check for cold solder joints on all connections that have large diameter wire. These connections apparently did not get hot enough to properly flow the solder on the large diameter wire.
Aug 21, 2010 | Whirlpool Heating & Cooling
Mar 08, 2010 | LG LS-L1210CL Mini Split Air Conditioner
Jul 10, 2009 | Heating & Cooling
Dec 31, 2013 | Daewoo DSA-122L Air Conditioner
330 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: