Question about Belling XOU252 Electric Single Oven

2 Answers

MAIN HOUSE FUSES TRIPPED, RESET, OVEN AND GRILL WILL NOT HEAT UP

House fuses tripped, set off by kettle. On resetting the fuse box the oven and grill which were in use would not produce heat, yet the orange power lights on the dials and the fan still operate. Cooker is the said Belling XOU252.

Thanks.

Posted by on

  • 1 more comment 
  • CliveM May 26, 2008

    Thank you. I will get an engineer chap to fix it. Getting it out alone is a job since its fitted.

  • CliveM May 26, 2008

    OK, thanks. I think I will get an engineer in to fix it.

  • Anonymous Mar 25, 2014

    oven fused house then light and fan only working

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 359 Answers

Sounds like the fan element this link will help http://www.ransomspares.co.uk/elements.asp?search_fd6=XOU252

Posted on May 26, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

It would appear that the tripping of the switch has caused some kind of short within the cooker. I would look for the continuity of the heating element.

Most likely the wires leading to the heating element have burnt and will need replacement. If you are comfortable with attempting a DIY, well and good. You will have to open the back panel to access the said wires. It should be easy enough to identify..it will be the wire leadingto the heating coil.

If , however, you are not familiar with these kind of things, I would recommend getting a repair guy to do it for you.

Cheers and good luck with the repair!
IrishDruid.

Posted on May 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The control panel on my oven doesn't seem to be working. I pressing COOKING MODE for 5 seconds and nothing happens. The display just blinks once in a while.


In the power panel on your house. There are two circuit breakers with their handles joined.One of these breakers has tripped internally which will stop the heating elements but not the control panel or oven light since they work on 120 volts. Reset the breaker or replace it.

Feb 02, 2016 | Bosch Ovens

1 Answer

Free fuse box diagrams


Parts #: W10317343
Substitution: WPW10317343 $145.98 at sears
Parts #: W10354052
Substitution: WPW10354052 $125.92 at sears
Part #: W10317347 front LED board $230 at sears
Many ovens have a bi-metal thermal fuse-also called a thermal limit switch-that protects the oven from overheating. The oven thermal fuse trips when the temperature in the oven gets too hot. After the thermal fuse trips, the oven won't heat. If the thermal fuse trips after the self-cleaning cycle, try resetting the fuse by turning off electricity to the oven, removing the exterior back panel, and pushing the reset button. If the fuse tripped during normal operation, replace it. If the problem persists, the electronic oven control board might require replacement. Reset the thermal fuse after replacing the control board.

Jul 15, 2014 | KitchenAid Ovens

1 Answer

Tried removing element from bottom oven, with the bottom oven selector on to provide some light. As I pulled the element out one of the terminals touched the casing and caused the light to go out, the...


More than likely you have tripped the house circuit breaker or fuse. If you know where the house fuse box or circuit breaker panel is check to see if either one side of the two 240 fuses is blown or one of the two tied together circuit breakers is tripped. If it is a breaker then shut off both breakers completely and then snap them both on completely or they won't reset. It is rare that an oven has a fuse internally. There can be thermal fuses but they will trip when the temperature is out of range.

Feb 25, 2014 | AEG U7101-4 Electric Double Oven

1 Answer

Oven not producing any heat


just the oven? then more than likely the element. if the stove eyes are not working as well, then your looking more at a sensor, thermostat, fuse, breaker, etc. almost always an element though

Mar 20, 2012 | Electrolux Ovens

1 Answer

When using the oven the electicity tripped; after resetting the breaker the oven does not appear to get hot; however the grill works, the light works and the fan works what could be the problem?


Sounds like the oven element has gone. When these elements go they often short against the outside casing of the element which is earthed (or should be). This trips the main trip switch in the house. Having tripped and cooled down, the element is now broken inside & won't heat up. Usually 2 screws to remove, either inside oven or outside at back. Element usually taken out thro oven. Take it & cooker info to your dealer & ask for replacement. Shouldn't cost much.

Jun 13, 2011 | New World Ovens

1 Answer

I have a hotpoint ew91 oven that stopped working after tripping house fuse. after resetting fuse fan works but no heat.


It is most likely that the oven heating element has failed which caused the house fuse to trip.

The replace the heating element will mean taking the back off the oven and removing the old heat element by undoing the fixing screws and the electrical connectors( normally this surrounds the fan assembly).

Fitting the new heat element should then be straight forward.

Remember to disconnect the power to the oven before removing the back.

Dec 09, 2010 | Ovens

1 Answer

Oven not heating


blue waffle is nice and i like to pop fish up my **** go to google and type in lol fish and then click im feeling lucky and do the same with blue waffle xx good look it could help your oven.

Mar 31, 2010 | Neff B1421 Electric Single Oven

2 Answers

Oven not working - rest of appliance fine


It is most likely that the oven heating element has failed and will need to be replaced.

This not an overly expensive part to have replaced and should be much less than the cost of buying a new oven although you would need to compare actual costs in your area.

Jan 17, 2010 | Ovens

Not finding what you are looking for?
Belling XOU252 Electric Single Oven Logo

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belling Ovens Experts

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

78257 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Belling Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...