Question about Apple iPhone 3G

1 Answer

My iphone 3g is not synced to my computer and got disabled so how can i enable it?

Posted by on

  • tehreemkhan2 Oct 03, 2010

    i tried before it took 2 hours and at the end it said sumthing like internet connection time out but my internet was working !!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 881 Answers

You need to restore it with a little trick. Read the steps below to learn how:

  1. Plug/connect your device to a computer (PC or Mac)
  2. Turn it OFF
  3. Press and hold the POWER and HOME buttons together for EXACTLY 10seconds
  4. Release the POWER button but keep holding the HOME button until the computer beeps indicating that a USB device is recognized.
  5. Open iTunes and restore your device.

Warning: Restoring will delete all data on your device including the jailbreak and unlock, but this is the only way for you to recover it.


If you don't get it at first, try holding the buttons for lesser time or see the other procedures and some screenshots on my tip (link below):

http://www.fixya.com/support/r5541493-put_iphone_ipod_touch_dfu_mode_restore


For more iPhone / iPod touch tips like jailbreaking and unlocking, CLICK HERE or contact me personally at this email:
sale-47hyk-1863377234@craigslist.org or add me on Skype: ebayseller.ca


...

Posted on Oct 02, 2010

  • tehreemkhan2 Oct 03, 2010

    yup and how much tym does it take?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i unlock my iphone 4 when its disabled


Does this copied and pasted advice help you?

iOS: Forgot passcode or device disabled If you set up a passcode on your iPhone, iPad, or iPod touch, and you or someone else then enters the wrong passcode too many times, your device will disable itself temporarily. Learn what to do if you have forgotten your passcode, or if your device displays a message saying it's disabled.If you enter the wrong passcode six times in a row, you'll be locked out and you'll see this message:
  • iPhone is disabled
  • iPad is disabled
  • iPod touch is disabled
    ht1212_01-ios_7-iphone_disabled-002-en.png
If you can't remember your passcode, you'll need to erase your device using iTunes, Find My iPhone, or recovery mode. Then use a backup to put your data and settings back on your device. Here's how. Use iTunes If you have synced your device with iTunes, you can restore your device.
  1. Connect the device to the computer you normally sync with.
  2. Open iTunes. If iTunes asks you to enter the passcode, try another computer that you've synced with. Or try the steps below to use recovery mode.
  3. iTunes will automatically sync your device and create a backup. If it doesn't, sync the device with iTunes.
  4. After the sync is complete, restore your device.
    ht1212_02-itunes_11-device_summary_tab-002-en.png
  5. When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup."
  6. Select your device in iTunes and choose the most recent backup.
Use Find My iPhone If you enabled Find My iPhone, you can use it to erase your device.
  1. Go to icloud.com/#find to see if you enabled Find My iPhone.
  2. Click All Devices at the top of your browser window.
  3. Select your device and click "Erase [device]" to erase your device and its passcode.
  4. Use the Setup Assistant on your device to restore the most recent backup of your device.
Use restore your device as new or from a backup.
  1. Disconnect all cables from your device.
  2. Turn off your device.
  3. Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
  4. Continue holding the Home button until you see the Connect to iTunes screen.
  5. iTunes will alert you that it has detected a device in recovery mode.
  6. Click OK, then restore the device.
Last Modified: Jul 8, 2014

Aug 04, 2014 | Apple iPhone 4 Black Smartphone

1 Answer

Why can"t I sync my iphone 5s wirelessly anymore ?


First of all make sure your system and your iPhone connected to same wifi network. Try to disable and enable network adaptor of your PC using Device Manager, also disable and enable wi-fi connection after doing that Make sure you have enabled Wireless sync in your iPhone then restart the itunes.. Wait few seconds it will surely find out your iPhone.

If problem still persist let me know.

Looking forward to hear from you.

Thanks & Regards,
Chandrashekhar.

May 31, 2014 | Apple iTunes

1 Answer

Ipad forgotten password


From the apple support site:

iOS: Forgotten passcode or device disabled after entering wrong passcode When you set up a passcode to secure the use of your iPhone, iPad, or iPod touch and then enter the wrong passcode, you may see a a message saying your device is "disabled". Learn what to do if you have forgotten or can't remember your passcode, or if your device displays a message saying it is disabled.If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
  • iPhone is disabled
  • iPad is disabled
  • iPod touch is disabled

  1. Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
  2. If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
  3. When the backup and sync is complete, restore your device.
  4. When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
  5. Select your device in iTunes and choose the most recent backup of your device.
Hope this helps!

http://support.apple.com/kb/ht1212

Feb 05, 2014 | Apple iPhone 3G

1 Answer

Iphone disabled


must be enabled to work!

Jun 07, 2012 | Apple iPhone 3G

6 Answers

Can you sync iphone to your ipad?


iPubsoft iPad iPhone iPod to Computer Transfer is the best choice to backup the data betweent th apple devices, including iphone 3gs/ 4/ 4s/ 5s, ipad, ipod etc. iPubsoft iPad iPhone iPod to Computer Transfer

Apr 07, 2011 | Computers & Internet

1 Answer

OVERSIZED DISPLAY


You can use iTunes to enable or disable any accessibility feature, including Zoom:
  1. Connect your device to a computer and open iTunes.
  2. Locate and click on the device under Devices:
    ts3129_01-itunes-source_list--en.png
  3. In the Summary pane, click Configure Universal Access:

    ts3129_02-itunes-configure--en.png
  4. Select Neither to disable Zoom:
    ts3129_03-itunes-universal_access--en.png
  5. Click OK and then click Sync to save the changes to your device.
If you do not have access to a computer or iTunes, use the following steps to disable Zoom on the device.
  1. On the Home screen, double-tap with three fingers to exit zoom.
  2. Locate and tap on Settings > General > Accessibility:
    ts3129_04-itunes-accessibility--en.png
  3. Tap Zoom and turn off using the slider:

Jan 29, 2011 | Apple iPhone 3G

1 Answer

How to set the gprs?


The GPRS (or EDGE which is enhanced GPRS) is activated when there is no 3G coverage in the area. To activate it would mean turning the 3G off.

This can be done by Settings > General > Network > and set Enable 3G to OFF.

http://www.tipb.com/2008/07/12/how-to-disable-3g-on-the-iphone-3g-for-more-talk-but-less-speed/

Sep 16, 2010 | Apple iPhone 3G

1 Answer

I accidently enabled the voiceover on by IPhone and need to disable it. The home screen says "slide or tap twice to unlock". I slide it by tapping twice (voiceover on) and then get the 4 boxes to enter my...


If you have your phone synced with itunes you can hook your phone to your computer by opening itunes on your computer and connecting your phone. Then click on your IPhone when it appears in the column on the left. Choose the option to restore to last backup or reset to factory defaults.

Hope this helps

Aug 17, 2010 | Apple iPhone 3G

1 Answer

Iphone is disabled i forgot the password


plug it into the computer you sync it with, (MUST BE THE COMPUTER YOU SYNC WITH!!!!!) and it will reenable, with a small risk that the enable time will change to 2452 min (random bug)

Dec 13, 2009 | Apple iPhone Smartphone

1 Answer

IPhone 3g activesync


Your iphone can not be synced with activesync, it must be synced with itunes! I've tired and can not get it to work! only itunes!

Jul 27, 2008 | Apple iPhone 3G

Not finding what you are looking for?
Apple iPhone 3G Logo

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

371 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...