Question about Qca Spas Jewel Series Topaz Plus Hot Tub

1 Answer

I have a Jacuzzi Z110 hot tub. the top control is broke (pn 51422). Can i use a digital top control PN 33334.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 310 Answers

When dealing with a big manufacturer like Jaccuzzi, it is unwise to swap top side controls. They make theirs proprietary on purpose so that swapping is more difficult (especially jacuzzi).
If you use the wrong one, the buttons on the controls will be misleading (such as temp up button cycling jets, or the ozone button cycling the lights, etc)
I would use manufacturer part.

Posted on Oct 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to find a service man in the Seattle area to get my tub working. It has power but won't come on.


then look in a phone book for a plumber . I am sure there are more than 1

Feb 11, 2016 | Home

1 Answer

I have a jacuzzi whirlpool modelz145, h240000 it keeps running on low never shuts off this just happened never did this before? Bad control board?


Is this an outdoor hot tub?

If it is an outdoor hot tub...is it heating up or just running all the time?

Sep 21, 2014 | Jacuzzi Home

1 Answer

Why is hot tub over-heating past max temperature?


Sounds like a problem with the thermostat.

Aug 05, 2014 | Jacuzzi Home

1 Answer

What top control will replace balboa p/n 33334


make sure recirculation pump is working

Jul 27, 2014 | Jacuzzi Pool & Spa

1 Answer

Replace belt genesis upright


Turn vacuum upside down on flat surface, remove the 6-7 screws from the bottom of the power nozzle, lay it on it's side and pry on the two accessible internal tabs to pop top cap of the nozzle off to access the pn motor assembly. Lay flat on it's back again and remove the screws that hold the roller brush in, remove the roller brush, remove old belt, install new belt on brush roll and pn motor geared spindle, push brush roll back in place, replace screws and pn top and VOILA!..you're back in bidness! Hop that helps!

Jun 25, 2014 | Electrolux Vacuums

1 Answer

Jacuzzi hot tub, Water is too hot. Heats until it trips the system. I have replaced the analog temperature control,


1) Safety question first
Why hasn't the GFCI tripped.
If your spa is not protected by ground fault., then you are at serious personal risk.
http://waterheatertimer.org/How-to-wire-GFCI.html#arc-fault

2) Replace the element.
http://waterheatertimer.org/How-to-test-water-heater-element.html

3) If element is cracked, it can continue heating to ground wire, causing runaway heating.
This applies to spas, and water heaters of all type.

Dec 08, 2012 | Jacuzzi Pool & Spa

1 Answer

My hot tub top control is flashing SPA6,and hot tub is not heating up.


Here is a link for you to resource that error code.
click that link and scroll through them until you find your error code.

Rod
US Parts Center

Aug 19, 2012 | Jacuzzi Pool & Spa

2 Answers

Can't unlock jacuzzi hot tub control panel


control panel not working, cannot control or work control buttons, stays in econ mode all the time. Nothing else works.

Nov 27, 2010 | Jacuzzi Pool & Spa

1 Answer

Need a users manual


Kathy,

I think what you're looking at are the part numbers for the heater and control systems used in some Jacuzzi hot tubs rather than the Jacuzzi model number. I ran into the same issue and discovered through some cross-referencing on the web (jacuzzi parts suppliers) that this is the part number control unit made by Balboa. Odds are they were used in multiple Jacuzzi models.

My suggestion: Look here http://clearcreekspas.com/model_id.html to identify the control panel for your Jacuzzi and then follow the link to the correct manual. Some cover multiple models so you will need to know the electrical requirements of yours (120 V or 240 V?) and then check the layout of each tub shell to determine which model is yours.

I figured out mine is a Jacuzzi Essence Model 350 this way.

Good luck!

Nov 11, 2008 | Balboa Instruments Garden

Not finding what you are looking for?
Qca Spas Jewel Series Topaz Plus Hot Tub Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Qca Spas Pool & Spa Experts

Ian Kime
Ian Kime

Level 2 Expert

77 Answers

byrdhaus188

Level 1 Expert

18 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Qca Spas Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...