Question about Acer AL1706AB LCD Monitor

1 Answer

When I turn the computer on the screen comes on then goes right back off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turned it on, it goes to the screen that has start windows


sounds like your boot record on hard drive is bad or hard drive turn on computer and hit like f10 or f12 it will tell you right after asus screen what key to hit for restore, if this doesn,t work hard drive is bad. hope this was helpful

Apr 15, 2010 | ASUS Eee PC 1000H Laptop

1 Answer

Optiquest q20wb goes to black screen after 2 secondsthen turn it off and back on stays on for about 2 seconds again goes black and if you leave it on the video will come back and then turn off almost right...


First to check will be the power supply, look for bad caps with bulging tops first then report back so we can guide you further, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums

Feb 04, 2010 | Computers & Internet

1 Answer

I have a new DELLS2209W Monitor. On occasion my


Hi there,

I want you to try something next time this happens, instead of rebooting the computer, just cut power to the monitor. Then switch it back on.

Does the screen come back up?

Comment back and let me know

Mike

Dec 19, 2009 | Dell Computers & Internet

1 Answer

The screen goes blank after 5 seconds


Make sure you have the correct drivers install for you video card. Also, check to make sure your resolution is not set to high for you video card. To get to resolution; right click on Desktop > click Properties > press Settings Tab, from there you can move the slider to change your screen resolution (try different resolutions until it doesn't shut off anymore).

Let me know.

Jul 09, 2009 | ViewSonic VG900b 19" LCD Monitor

2 Answers

Blank Screen


Could be a bad lcd controller board inside that is heating up on the element thus making a bad connection or your set you video mode beyond the scope of you lcd and thus its not displaying.

May 25, 2009 | Sony VAIO® VGC-LS25E All-in-one Desktop PC...

1 Answer

I have a shap lcd computer monitor and when i plug it into my computer and turn the power on, the little green power light comes on, screens back. and after 5-10 seconds the light turns orange and blinks...


It could be your monitor is fine. It simply goes to a cycle when its turned on and does not detect any signal coming from your CPU, it simply goes on standby mode (hence the darker image and orange/blinking light.) have you checked the computer (CPU) part?

Dec 04, 2008 | Computers & Internet

1 Answer

Mag innovision LT716s monitor


When I turn on my computer the monitor takes a long time to warm up and colors change and vertical lines flash across the screen from right to left before the screen becomes normal again. Now the power light even goes out upon turning on my computer and I have to unplug the video cord and plug it back in to start the screen back up which even takes longer.

Feb 19, 2008 | Mag Innovision LT782S 17" Flat Panel LCD...

1 Answer

Monitor remains in standby


turn the monitor off and the computer off. unplug it from the wall. let set for 10 sec. make sure you have it in the right place and in all the way. turn computer back on, then the monitor.

Dec 18, 2007 | X2Gen MG15VT 15" LCD Monitor

Not finding what you are looking for?
Acer AL1706AB LCD Monitor Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...