Question about Computers & Internet

1 Answer

Hi there, I have a Fujitsu Siemens Amilio laptop with windows 7 which has recently started to display an error message on startup. It says CMOS Checksum error "Check date and time" By pressing "F2" and entering a setup page I can then input the correct date and time and it starts windows normally. This happens on every startup. I have tried leaving the laptop on charge for a day or so to try and charge the Bios battery, this has little effect and only makes it startup normally for a couple of times. Am I right in thinking it is the Bios battery at fault? If so is it easy to replace at home and where can I buy one from? Many thanks for any advice Jake

Posted by on

  • scoobydoo_32 Oct 01, 2010

    Hi, Many thanks for your advice. I shall have a go.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

If you've some experience you can replace it at your home.All of you need is a screw driver for remove the back panal.On the back side you can see the CMOS battery.
you can buy it your nearest Computer pheriperal sales center.

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sd card when I insret not workinkg on fujitsu siemens amilio pro 3205 when I restart it works sometime


Hi Peter, this would depend on the type of card & OS that you are using, if you have a standard sd card with XP then it will only recognise a max of 2gb, if you try to use a SDHC card then it will not work at all, but if you had win 7 on the same unit then any sd card would work as long as there are no compatibility issues, hope this helps.

Feb 01, 2014 | Fujitsu Siemens Computers & Internet

1 Answer

Fujitsu siemens scenicview b19-3


hi you must disable the main screen in properties section of the display panel then when you start up the computer the screen will not activate until windows has loaded and found and installed the screen drivers after that all should be good to go if you need any further help don't hesitate to contact me :)

Feb 07, 2013 | Fujitsu Siemens Premium Line P19-1 19" LCD...

1 Answer

I'm using Fujitsu Siemens Amilio PI 2550 . I forgot my BIOS Password. How can I reset it ?


Generally BIOS passwords can only be reset by sending the computer back to the factory. Talk to whatever store you got it from about how to send your computer in to have it reset.

Mar 16, 2011 | Fujitsu Siemens Computers & Internet

1 Answer

My fujitsu siemens amilo pro v2000 has no display, no beep codes too.. need help. tnx


does it display on startup? i mean before it loads windows. if it doesn'y display on start up, then you could be having a faulty flex or display unit. LCD. replace.regards

Feb 23, 2010 | Fujitsu Siemens AMILO Pro V2000 Notebook

3 Answers

I have recently installed windows 7 to a fujitsu amilo li 2727


I have been through this myself, the software you are missing is called Launch Manager. Browse to Li 2727 on http://ts.fujitsu.com/support/downloads.html and download the drivers for vista, verified working on win7 ultimate. Install launch manager and the wireless + brightness hotkeys will work again without any further setup!

Nov 26, 2009 | Fujitsu Siemens AMILO Pro V7010 Notebook

1 Answer

CMOS settings on startup


If u mean by the internal battery ..the icon battery which placed on the mainboard .. so u just need to prss F2 to adjust the current date and time .. and to get stable Download the bios update from fujitsu.com .

good luck

Nov 10, 2009 | Fujitsu Siemens AMILO D-7830 Notebook

3 Answers

Remove password from my amilo laptop


ple.tell me is it system password or cmos password?

Jul 24, 2008 | ASUS Eee 4G Notebook

1 Answer

Fujitsu siemens amilio pro 2020


http://www.laptop-ersatzteile.de/Notebook-Ersatzteile/Fujitsu-Siemens/Amilo/Pro-Serie/PRO-V2020/Fujitsu-Siemens-Displayscharniere-LR-Amilo-Pro-V-2020::4868.html?XTCsid=5s89h7c402bg85d8eo3l4i7cq33m5g2p

here thay sell them

Jul 02, 2008 | Fujitsu Siemens Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...