Question about Printers & Copiers

1 Answer

My canon mp500 is displaying error code 6400. the alarm, and copy light are flashing. the usb cables are connected.the manual has no error code 6400 listed. please help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 183 Answers

That error indicates a problem with the sheet feed unit. Unfortunately this is not user fixable and will require you send the printer to Canon's Authorized Repair Center (for your local area, you will find it easiest to locate this via Canon's website).

Posted on May 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a canon MP550 which has thrown up the error 6C10. I have tried the solutions suggested at FixYa, but to no avail. My printer's only 6 months old. Any suggestions? Regards Jan


It is my pleasure to guide you.


I have done some extensive research on your 'error 6C10'.


I have looked at the following:


QUOTE

PIXMA MP500 Printer
Canon Pixma MP500 Service Manual
http://www.printermanualguide.com/canon-printer/canon-pixma-mp500-service-manual.html

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (ON/OFF button), or Alarm LED Lit in Orange)

Cycles of blinking in orange (Alarm LED) and green (ON/OFF button) 16 times

Error [Error code] Valve sensor error [6C00]

Conditions An error occurred in the valve sensor during cleaning.

Solution(Replacement of listed parts, which are likely to be faulty) - Logic board ***'y (QM2-3078)
UNQUOTE


I realize that the '6C00' error is not exactly your but the manual does not have the 6C10. You can download that at the above link.


I also look at the http://www.retrevo.com/support/Canon-MP500-Multifunction-Printers-manual/id/259bh640/t/2/ Canon Pixma MP500 Users Guide Manual. There are several codes but not the 6C10. You can download this above as well.
Good luck and please post back that you are successful, giving thumbs up, or if I can be more helpful.

Jun 12, 2011 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Have a Canon MP830. in the middle of printing, it came up with error code 6A00, and now all it does is flash the alarm light and copy light. how to fix?


http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp830#BrochuresAndManuals

I would download the manual for windows 7 and see if the 'alarm and copy light flash' error is listed. I could not find it referred to in the support area of the canonusa.com website. Also, you could call 1-800-OK CANON and talk to a rep. about this problem.

Good luck on this repair.

Feb 06, 2011 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Error 6500 on a Canon MP500


choy ada yg tahu printer canon pixma mp500 error code 6500 g y? please help me

May 12, 2010 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

All of a sudden my MP500 gives an error code


If the carriage will come out of the right corner, you need to look inside and see if there's a paper scrap or anything blocking the purge assembly. The purge is the unit that cleans the printhead, and that error says it's not moving properly. If nothing is stuck in there, you will need to have the purge assembly replaced.

Dec 28, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Canon Multipass F80 printer. "Check printer press resume key"


On the f80 you need a shop to go to service mode and get the error code and tell you what the problem is. Could be purge assembly, waste ink full, feeder error, printhead error, any number of possible problems.

Aug 05, 2009 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Error msg 6A00. Cant find anything on this code. Any solutions


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 05, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Receiving error message on display screen of mp500 code "6A00"


Hi
I think it the same code
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 05, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Error 6A00


The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

May 30, 2008 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

Waste ink absorber -mp500


Service mode operation procedures 1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons. The COPY LED lights in green to indicate that a function is selectable.) 2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.) 3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange and COPY in green, starting with Alarm LED.) 4) When the COPY button lights in green, press the Stop/Reset button 4 times. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange and COPY in green, starting with Alarm LED.) 5) Press the ON/OFF button 2 times. You're good to go! Bear in mind that if the ink absorber is full then you risk getting ink everywhere! Please update the question & let us know if the information given was useful to you - Good Luck!

Aug 31, 2007 | Canon Pixma MP500 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...