Question about Sony VAIO RB30C (VGCRB30) PC Desktop

1 Answer

Won't boot cancelled in the middle of DLing a file -computer did not respond. Turned off comp by on/off switch. Tried to push button and turn back on and it boots up to the windows XP screen and gave a black screen asking to choose startup mode. After choosing one, it just repeats everything and I end up on that screen again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Try pressing F8 as your machine gets ready to start windows. Keep tapping it until you get a menu. You can try "most recent settings that worked" or failing that try starting Windows in safe mode. If it will start in safe mode regress it to a point before your failed download using System Restore. If it won't start at all, you may need to reinstall Windows.

Posted on May 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a new program on my laptop and forced cancelled in the middle because of the long time now my laptop is not loading it stuck in the welcome screen by the way I've forgot my password an


Try reformatting your computer 'coz maybe your operating system is corrupted. If your afraid to lose your files, use different hard disk to install your new Operating System, then after installation,, copy all the files from the old hard disk to your new one by connecting it both to your computer and selecting your new OS in boot menu to start.

Jan 24, 2015 | Packard Bell Computers & Internet

1 Answer

My Acer Aspire M1201 won't turn on.


More than likely your power supply got fried from a power surge during that storm anyway. You'd be surprised at how worthless most surge suppressors are these days.

Jul 25, 2012 | Computers & Internet

1 Answer

My son put a load of laundry in and forgot the hot water heater was broke when he turned the machine on. It wouldn't run and the door is still locked. We tried unplugging it, holding the cancel butt


Remove the lower panel by taking out the screws at the bottom. Unplug washer. Then reach up inside to the bottom of the door switch and pull down on lever to unlatch the door. Try running machine again after plugging back in.

Nov 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a acer (aspire) notebook. And a couple of months ago i was playing on it and it had a blue screen. I got scared and didn't go on it for like a week. A week later i went back on it said acer on...


No bootable device means your computer is trying to boot from a storage device and it's unable to find the operating system. Check the your system BIOS to see if your computer is still detecting your harddrive. To do this:

1. Reboot your comp. While it's coming up, keep hitting "Delete". This will bring up the Set Up.

2. Using the navigation keys of your keyboard, navigate to the tab that says "Boot Preferences" and hit enter.

3. Switch the boot device to your harddrive and save your settings then reboot.

4. If your harddrive is not being detected, it's either loose or has gone bad. In which case it would be best to have a tech take a look at your notebook.

May 22, 2011 | Computers & Internet

1 Answer

My 3g iPhone is has clear all recents / Cancel stuck on the screen and wont respond. it will not respond to touch, I tried to turn it off but I cant slide to turn it off. when I touch clear all or cancel...


try a soft reset hold power button and middle button at the same time until you see the apple logo...if that doesn't work you could always plug it into itunes and click restore factory settings

May 04, 2011 | Cell Phones

1 Answer

I have had a jvc GZ-MG130U for a while. The kids have recorded a whole bunch of things and I finally downloaded it to the PC in order to empty the camcorder. But when I started deleting all the files,...


That's a bummer. I have the same camcorder and yesterday 10-3-2010 mine did the same thing. I deleted some files from the file folder located on my camcorder from my computer (which I learned not to do), went to the disconnect device on the computer and it said "safe to disconnect" so I did. The screen on the camcorder said "connecting to device" the whole time I was transferring files to my computer and after my computer said it was safe to disconnect. After it was safe to remove my camcorder, I unplugged the usb cable and tried to turn off the camcorder and nothing happened. I removed the wall charger and battery which finally turned off the camcorder. I then tried to turn the camera on and same thing as you, Everio sign came on and then the screen went blank. Nothing was accessible after turning the power on. One time an error sign appeared saying something like disc broken, need to restore disc to record video. I tried everything, turning on with wall charger and no battery, pushing buttons while it was turning on, holding down buttons, etc. Finally I tried something that made it work. Don't know exactly what I did, but it started working.
Solution: With the power in off position and the battery removed, as well as the wall charger cable removed, I flipped open the screen, opened the lens, connected the wall charger, turned switch to on position and let it run its coarse. It was on for 5 mins or less then shut itself off. I then flipped the switch to off, let it sit for a few minutes and turned it back on, while it was booting up (this part has no logic behind it) I pushed the "plastic" lock buttons for the battery and a screen appeared asking me if I wanted to restore the hard drive. I quickly clicked yes and all is well. The camcorder is back to factory settings but it at least works. Luckily I copied everything before it crashed. The key for the future is to not delete files from the camcorder while it's connected to your computer.
Sorry for the long post, but hopefully it helps.
Eric

Sep 03, 2010 | JVC GZ-MG130U Camcorder

1 Answer

Won't turn on but will come on when plugged into comp...


push the reset button on your zen .
it should be on th e outside in the edge part .
push it , then try to turn it backk on .

Jul 15, 2009 | SanDisk Sansa Clip MP3 Player

2 Answers

UNABLE TO BOOT htc touch pro


Yes. i solved the problem in my one
press:
vol down + restart + and the middle button = good :)

Dec 03, 2008 | HTC S710 Smartphone

Not finding what you are looking for?
Sony VAIO RB30C (VGCRB30) PC Desktop Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...