I HAVE A HYUNDAI GALLOPER 2.5 TCI POWERED BY D4BH ENGINE. I WANT TO YHAVE IT TUNE UP BUT THE PROBLEM IS I DONT HAVE A MANUAL PERTAINING TO THE TIGHTNESS MEASUREMENT OF THE FILLER GAUGE. cAN YOU PLEASE PROVIDE WITH ONE? THANK YOU

type wiring diagram for ............... into google and click images

for the K2700 II 2.5 TCi 2004 - 07 engine code D4BH it is inlet 0.15mm cold and exhaust is the same 0.15mm cold. for the K2700 II 2.7D 2004 - 08 Engine code J2 it is inlet 0.30mm cold and exhaust is 0.38mm cold.

lash, this engine has solids?
sorry cant help, no year car, or body stated.
try to understand,
the online database ask year first.
and sorry, im not trying them all for you,
Diesel
hard to find d4 spec, here.
i google for you and landed here
http://www.slideshare.net/AndersonRogerioFiora/manual-hyundai-hr-d4-bh-25-tci

see page 21



see my link see if it is good. for yours. i dont know.
for any turbo , engine the FSM is god. read it. it can be different
as you know valves run hotter, (and friends)
it is TCI book.

rusty fuel lines

i am working on a galloper 1997 but cant find the dlc (obd connector)

The fan is connected to the pulley by a clutch system. It can be turned when the car is off. This is set up the way it is as to limit the speed of the fan, when the engine speed is very high. The fan will only turn at a set speed because of the fan clutch. In other words, it's normal.

the only information I could find on that engine is that it is apparently a Mitsubishi product, you might try locating a part number on the water pump, that would be very beneficial, then you could google the part number or even take it to your local parts store and have them locate it.

Maybe the shift valve in the valve body is sticking, or shifter adjustment? Might be wise to contact TCI.

i need hyundia galloper manual front wheel drive

it will be in the owners book but 32-40 psi