Question about Canon PIXMA MP190 All-In-One InkJet Printer

Open Question

I used MP Tool v.0.9.6 to reset my MP198, the resetter recongised my printer but ink level ,Port name and all colour level are unknown, and the whole Operations section are deem in colour and can not be click. And I tried to use the Service Tools but fail to work as well. My printer status is: the Black ink cartridge is new, and the colour cartridge is in low level warning. The front panel has the following buttons: POWER, ALARM LITE, BLACK INK LITE, COLOR INK LITE, SCAN, STOP/RESET, BLACK/COLOR COPY, PAPER SELECT, MAINTAINANCE. PLS, detail procedure and link to download software is important as I am newb in this operation.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: resetting my ink levels

This is not a solution, but i must comment strogly to the guest that submited the solution of holding the stop button...because IT WORKS(even though it doesnt reset the counter, it atleast allows you to continue printing)!!! and no, i am not the same user as the above...i am just someone who gave the solution a try and it definatly does work! so to that user...thank you very much!!!

Posted on Jan 14, 2008

Ad
  • 1 Answer

SOURCE: Canon Pixma 1P1600

printer driver canon PIXMA iP1600

Posted on Jan 26, 2008

  • 6 Answers

SOURCE: reset Ink levels for canon mx310

To Reset the Canon Cartridges Works 100%

Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Relase power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the inicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset
Any problems contact me on charmed_halliwell@hotmail.co.uk

Posted on Feb 23, 2008

  • 1 Answer

SOURCE: Cannon Pixma 160 - How do I reset the ink level indicator

crapt the driver

Posted on Oct 21, 2008

jacklee366
  • 541 Answers

SOURCE: resetter for canon mp 145

if you bgo on the hp website you can chat to them live and they will tell now to reset your ptinter

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Error 5B00


Canon PIXMA MP180 All-In-One InkJet Printer
Error 5B00

Jul 04, 2012 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

The printer is saying ink absorber full. Where do I find this and how to fix the problem.


Hi Good day!!! You need to reset your ink absorber pad
Things need: MP tools download it here: http://pcprinter.blogspot.com/2008/02/mptool-multi-resetter-for-canon-mp.html

1. Download the MP Tool software to your computer. The download file comes in a compressed ZIP file that must be extracted using a ZIP file-extraction program. Once you have downloaded the MP Tool zip file, double-click on the file to extract the "MPtool.exe" executable program.

2. Turn on your printer and double-click the "MPtool.exe" file.

3. Click on the "Reset Main" button listed under "Waste Ink Counter," in the MP Tool program screen.

4. Click on the "Reset Platen" button and exit the program to complete the process.

Thank you for using FixYa

Nov 12, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

What causes error code 6C10


Hi Good day!!!
Thing need: MP tools download it here: http://pcprinter.blogspot.com/2008/02/mptool-multi-resetter-for-canon-mp.html

1. Download the MP Tool software to your computer. The download file comes in a compressed ZIP file that must be extracted using a ZIP file-extraction program. Once you have downloaded the MP Tool zip file, double-click on the file to extract the "MPtool.exe" executable program.

2. Turn on your printer and double-click the "MPtool.exe" file.

3. Click on the "Reset Main" button listed under "Waste Ink Counter," in the MP Tool program screen.

4. Click on the "Reset Platen" button and exit the program to complete the process.

Thank you for using FixYa

Nov 11, 2010 | Canon PIXMA MP620 All-In-One InkJet...

2 Answers

My printer displayed: the ink absorber is full. i then cleaned the absober but its now not displaying anything. so how best do i solve this problem?


For Canon MP190 ONLY it worked that software but I used a software named Resetter Canon MP198. First put the printer in service mode. Press and hold the RESUME button (Is the red one ), then press and hold the POWER button, wich became green.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times. Ast the first press the green power button turns off and a orange led turns on. At the second press the orange led turns off and the power became green. Now the printer is in Service Mode. So with printer conected to PCstart the software and reset the ink absorber level. It worked for me.

Oct 10, 2010 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

Resetter


http://safemanuals.com/annexe_MX310%20series%20Easy%20Setup%20Instructions_CANON_PIXMA%20MX310-_E.htm
The reset method work for canon printers that using PG-40 and CL-41 cartridge. After doing thisreset method canon printer will not display low ink notification anymore and will not show error code “E4′ or “E5′. This method takes from indoreset yahoo group and prepared by Choy.
Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset ink level notification:
  1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again
Enter to service mode for canon MPXXX
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
http://downloadprinterresetter.blogspot.com/
OK, go to website above, and download a "Resetting" tool, this makes resetting easier to do.

Apr 09, 2010 | Canon PIXMA MX310 All-In-One Printer

3 Answers

Canon pixma mp 145 E4 problem


Dear Sir,

Error Code E4 = No ink.
Generally printer doesnt recognise refilled ink.
Try the to reset the ink catridges
by mp tool software,mptool reset the printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460.And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.
Download Mp tool

i think it solves your problem,But the actual procedure and best solution is replace the ink catridges,according to canon new genuine canon ink catridges save your printer life also.
if you find any difficulty leave a feedback,we will glad to assist you


good luck

Sep 08, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

INk LOW DISPLAY DOESNT RESET AFTER RENEWAL


Dear Sir,
Here is the Solution,
By using mp tool software we can resett ink levels,mptool is the popularness software to reset printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460. Excess of software that is the program measure of small and amenity of usage. Ability of the software that is to reset level black and color cartridge at canon pixma mp series. And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.

646affa.jpg

Download Mp tool

this solution deffinately solves your problem

Aug 27, 2009 | Canon PIXMA MP180 All-In-One InkJet...

2 Answers

What is a chip resetter?


The resetter actually resets the Reset Ink Counter not a chip. It resets the ink level (ink metrer) . You can use the resetter tool.
Download the mptool from this site:

http://printer1.blogspot.com/2008/03/resetter-printer-canon-mp-series-mptool.html

You may have to copy and paste the link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Oct 26, 2008 | Canon MP610 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA MP190 All-In-One InkJet Printer Logo

1,090 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1983 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...