Question about Diehl TIME CLOCK- 120V 24 HOUR

1 Answer

How do i wire my diehl 880 ? - Diehl TIME CLOCK- 120V 24 HOUR

Posted by on

1 Answer

1) Here is Diehl 880 instruction manual

2) Diehl 880 is 120V timer
-1/2 HP
-1000 Watt tungsten. Tungsten means incandescent light bulbs.

3) Checklist:
a) Your load does not exceed capacity > Timer is too lightweight to control 1500 toaster oven.
b) You need 120V line coming from breaker box with black Hot wire and white Neutral
c) You need 120V line going to Load that also has black and white wire
d) Test each black wire to ground to see which black wire is HOT

4) Deihl 880 sell sheet pdf says 880 is available SPST (single pole single throw) -or- SPDT (single pole double throw).
-The difference is pole #4 on the timer.
-If you are trying to turn one circuit off just as another circuit turns on, then you need the SPDT
-If you are turning one circuit on-and off, then the following instructions are for you

how do i wire my - 5609d99.jpg

5) Wire clock
-There are 5 poles > look for markings 1-thru-5
-If no marking, then poles 1&2 are probably spaced apart from other poles
-Connect Hot and Neutral wires to poles 1&2 >> this powers clock motor, they go on either pole

-Pole 4 not used

6) Wire timer
-Poles 3&5 are timer circuits
-Connect Hot line to pole 3
-Connect black wire going to Load to pole 5
-Connect white wire from Load to Neutral

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connection diagram for diehl t85 typ 600


1) Copy following links.
http://waterheatertimer.org/images/Deihl-T85-600-wired-for-208-230-Volt.jpg
http://waterheatertimer.org/Countdown-timer-horsepower-ratings.html#T85

2) 3-pin 5 amp service has 2 hot legs (wires) located across from each other on outlet.
Interrupt one hot wire and circuit turns OFF.
However live power potential still exists on remaining hot leg.

3) To turn off both Hot legs, use DPDT spring-wound timer such as Intermatic 60 minute FF460M or FD460M
http://waterheatertimer.org/pdf/039_FF-series-sell-sheet-with-wiring.pdf

Jan 05, 2013 | Diehl Hardware & Accessories

1 Answer

As i saw the timer i wonder what is the use of that adjust around the timer..as i saw the model of the timer


Question doesn't make sense in english.
For foreign translation, you can use google translate.
http://translate.google.com/

Deihl analog timer has segments around edge of timer dial.
Segments can be set in or out.
Use finger to set segments one way or the other way.
The dial rotates a full circle each day.
The segments move small switch.
The switch turns light on and off.
http://waterheatertimer.org/images/Diehl-880-segments-A-.jpg

Open following link.
http://waterheatertimer.org/How-to-set-timers.html

Sep 04, 2011 | Diehl TIME CLOCK- 120V 24 HOUR

1 Answer

Manual for diehl multi-timer typ 181-5


Timer number does not match Diehl timer numbers

1) Diehl timers and manuals appear on following links:
http://www.borggeneral.com/
http://www.borggeneral.com/diehl-control-timers.html

2) Add a comment with in-focus photo of timer posted on flicker for possible identification and more help.

Jul 19, 2011 | Hardware & Accessories

1 Answer

Nedd wiring diagram for near future upgrades


You posted under Deihl time clock.

1) Deihl makes 120V and 240V timers with NO and NC terminals.
These timers usually have 5 terminals. Some have 4 terminals.
Facing the terminals, first two terminals on left are for clock motor. Use multimeter set to read 120V and then 240V to check voltage of your clock motor.
Three terminals on right are NO, COM and NC.
Turn power off, pull wires loose and use multi-meter set to Ohms to check continuity of terminals and figure out which terminal is which.

2) Open following links to help identify your manual.
http://www.borggeneral.com/diehl-control-timers.html
http://www.borggeneral.com/industrial-timers.html

3) Other companies make similar timers, with various wiring, but all can be tested as shown in #1 above.

4) Add a comment and describe your timer and what timer is connected to.
This will give us clearer idea how to answer your question without guessing.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Sample 120V Deihl 880 wiring:
geno_3245_270.jpg

Feb 07, 2011 | Diehl TIME CLOCK- 120V 24 HOUR

1 Answer

Need wiring diagram SPST power to timer timer to light . two screws marked timer 1 nc 1no 1 com


Here are two possible solutions, since timers are made different ways:

1) Diehl timer has 5 terminals
Drawing below shows wiring for Diehl SPST:
geno_3245_259.jpg

2) Your timer might also be wired as follows:
Two screws marked 'timer' are for 120Volt Hot and Neutral that power the clock motor (in drawing above, these are terminals 1 and 2).
Another Hot wire connects to COM. (in drawing above this hot wire shown connecting to terminal 3)
Load wire connects to terminal NO (in drawing above this wire shown connecting to terminal 4)

3) NO is Normally-Open turns ON when tier turns ON
NC is Normally-closed is ON all the time, EXCEPT when timer turns ON. So NC terminal turns OFF when timer turns ON.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Dec 31, 2010 | Diehl TA-4150 24 Hour Electromechanical...

1 Answer

Need to replace a Diehl Typ 880, T85 120V 60Hz 15Amp timer what is its current model to replace?


The Type 880 is the exact replacement. Still available at most pool supply outlets.

Sep 27, 2010 | Hardware & Accessories

Not finding what you are looking for?
Diehl  TIME CLOCK- 120V 24 HOUR Logo

1,931 people viewed this question

Ask a Question

Usually answered in minutes!

Top Diehl Hardware & Accessories Experts

Cameron Dyer
Cameron Dyer

Level 1 Expert

24 Answers

Gene Haynes

Level 3 Expert

5089 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Diehl Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...