Question about D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge

3 Answers

Password i forgot my username and password for the 192.168.0.1 thing how can i get another one

Posted by on

  • 1 more comment 
  • Anonymous Jun 13, 2008

    configure di 604

  • Anonymous Jul 14, 2008

    how do i reset my router?

  • Anonymous Jan 31, 2009

    cant log on saying protected dont no password askin 4 key

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 126 Answers

To expand on Curly's solution: There is a small pinhole on the back of the router near the power connection. To reset the router to all its factory defaults (including resetting the admin password) make sure the router is ON (the power light is on) and, using a paperclip, push the tiny button inside the pinhole for about 10 seconds. Then, when you log into the router, the userid will be admin and there will be NO password. Just hit return. That should do it. I strongly recommend setting a new password immediately.

Posted on Feb 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to make broadband brigde?

Posted on Sep 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

You reset the router but it will erase all of the settings that you have on it.

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to connect aDI-604UP wired router to a DIR-615 wireless router to use as a printer port wirelessly


Hello Richard.

For this, you have two types of connection
1. LAN_LAN (ethernet to ethernet) -->wireless router is acting as a switch
2. LAN_WAN (ethernet to internet)-->wireless router is acting as a wireless router

in this case, you need the LAN_LAN connection

Physical connection:
plug an ethernet cable from the ethernet port on the wired router and connect the other end of that cabl to the ethernet port on the wireless router

Configuration:
log-on to the setup page of the wireless router, do this while the wired router is turned off.
-open your internet browser, type 192.168.0.1 on the address bar. Then type the username & password for the router ( default admin as the username, password : ).
Under the setup tab, click manual configuration. Then click network settings, change the router ip address to 192.168.0.5 & disable the DHCP server. save the settings. Just personalize the wireless network.

Hope this helps.

Sep 15, 2010 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

How to put in bridge mode


Resetting modem to Factory Defaults
Using the tip of a ballpoint pen or unfolded paperclip, press and hold the Reset button located on the bottom of the router. The pwr LED will blink red once, indicating that the reset has begun. Continue depressing the Reset button for four seconds or until the pwr LED begins to blink alternating red-to-green. Release the Reset button.
Set to bridged mode
Should now be on http:\\10.0.0.138 Click “Login” option. The “Username” is admin and the “Password” is admin. Then click “OK”. Click the “Setup” option and then click the “WAN interface” option. If asked for a Username/Password use admin/admin Click under VC heading the “8/35? option. Click “Next>>” The PPPoE option should be selected and then click “Next>>” again. Under the heading “PPPoE Type” select the “Bridge only” option and then click “Next>>”. Click “Finish”
A reboot is required before the new configuration takes effect. Click the word “reboot”. An additional “Reboot” button will be displayed. Click this “Reboot” button”

Aug 29, 2010 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

I was helping a friend who has Earthlink DSL (a ZyXel DSL modem) to get her Linksys WRT160N wireless router working with the Earthlink modem. No luck. Earthlink won't help unless you pay $7.95/mo with a...


Hello mcneel,

The router should use the ZyXEL P600 as it's DHPC Server. And review/update the ZyXEL WAN configuration as follows:

• Log on to the ZyXEL P600 browser configuration interface: 192.168.1.1
• Enter username/password: Default is username:admin - password:1234
• Click '+' by Network in the letf-hand panel
• Click WAN
• In the Internet Connection tab, select the following options:
...
Name - (Any Name)
Mode - (Routing)
Encapsulation - PPPoE
User Name - (ISP login username eg. MyName@isp.com)
Password - (ISP Login password)
Service Name - (Leave Blank)
Multiplexing - (LLC)
Virtual Circuit ID
VPI - (Leave Blank: Issued by ISP)
VCI - (Leave Blank: Issued by ISP)
IP Address
Obtain an IP Address Automatically - ([X] Check this option)
Static IP Address - (Not Selected)
IP AddressI - (Leave Blank)
Connection
Nailed-Up Connection - ([X] Check this option)
Connect on Demand Max Idle Timeout sec
...
• Click 'Apply' button
• Close the browser configuration interface page


Finally, this link to the EarthLink DSL FAQ Setup Installation and Configuration page might offer some useful suggestions:
http://www.dslreports.com/faq/earthlink/30_Setup_Installation_and_Configuration

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Feb 04, 2010 | Zyxel Prestige 645M (AM408405) Bridge

1 Answer

SPEEDSTREAM 4200 MODEM CONNECTED TO WRT54G ROUTER WIRELESS DONT


turn on the wireless option in the router...
plug your computer into the router type in
192.168.1.1
username: admin
Password: public

go to wireless tab
turn it on

END!
P.S.
Also you have to be in range!

Sep 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

No activity on my new speedstream 4200


Ethernet and DSL lights are indicating you have ADSL available on your line, and that you have computers connected to the router.

What has probably happened is that Optus did not set up the new router with your username and password. Go to thw following website for details on how to setup the modem.

http://help.optuszoo.com.au/help/dsl/connected/windows/optus_modems/speedstream_4200



Manual Modem Settings The Optus DSL Broadband self-installation CD configures all the necessary settings for your DSL Broadband service. You do not need to manually configure your modem if you have run the self-installation CD. While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.
The Siemens SpeedStream 4200 ADSL modem can use either USB or Ethernet to connect to your computer.
  • If you are connecting via USB you will need to run the self-installation CD to install the USB driver before you connect your modem. The Siemens SpeedStream 4200 ADSL modem supplied by Optus has been customised for the Optus DSL Broadband service. Only the USB driver supplied on the self-installation CD will work with the Optus service. If you do not have the self-installation CD, you can download the latest drivers from the Siemens website.
  • If you are connecting via Ethernet it is possible to manually configure your modem without the self-installation CD. Only a web browser is required.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service:
  • PC settings - Configure your computer's Ethernet network interface.
  • Configure Your Modem - Set the password in your modem's configuration pages.
top
PC Settings Step by step instructions are provided for each of the supported Windows operating systems:
  • Windows 98/Me
  • Windows 2000
  • Windows XP
  • Windows Vista
top
Configure Your Modem To configure your modem settings you must now access the configuration manager using your web browser. This is done by entering the IP address in the address bar of the browser window as follows:
Note: If you are updating the password in your modem, please complete steps 1 to 3 only.
Step 1 of 5
  • Enter http://10.1.1.1 (Default IP address of the Optus Supplied Siemens SpeedStream 4200) to access the modem Configuration software. You may wish to add this page to your Favorites for easy access later.
  • The following modem System Summary screen will appear.
ss4200_home_disconnected.gif Step 2 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click PPP in the list of options that appeared below the word Setup.
  • The ISP Password page will appear:
ss4200_ppp.gif
  • Replace the default username (john_citizen@optusnet.com.au) with the username provided for you by Optus DSL Broadband.
  • Replace the default password with the password provided by Optus DSL Broadband in the Password field.
  • Note: You will find your Optus DSL Broadband username and password on the letter you received with your self-installation kit.
  • Save these details by clicking the Save Settings button.
Step 3 of 5
  • The next screen will ask you to disconnect and reconnect to the Optus DSL Broadband service.
ss4200_ppp_reconnect.gif
  • Click the link to return to the System Summary page.
ss4200_reboot_3.gif
  • Click the Disconnect button to disconnect the modem from the Optus DSL Broadband service. The text on the button will change to Connect.
ss4200_home_disconnected.gif
  • Click Connect to reconnect the modem to the Optus DSL Broadband service.
Step 4 of 5
  • Click on the word Setup in the green menu of options on the left side of the web page. An expanded set of options will be displayed.
  • Click the word Mode in the green menu of options on the left side of the web page.
ss4200_mode.gif
  • Confirm that Optus Bridge is the selected operation mode.
  • If Optus Bridge is not selected click the radio button next to Optus Bridge to select it.
  • Click the Apply button.
Step 5 of 5 ss4200_reboot_1.gif
  • Click the Reboot button to restart the modem using your saved settings.
ss4200_reboot_2.gif
  • After about a minute the modem will return to an operational state and connect to the Optus DSL Broadband service.
ss4200_reboot_3.gif Once the modem has rebooted and the ADSL connection has been successfully established the DSL LED indicator will light steady green.
Your modem is now connected to the Optus DSL Broadband service.

Jul 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

RAD AIRMUX 200 NO Communication


You didn't say what rev. level you have, but if they were manufactured after 2006, your problem is most likely a lost SNMP read/write community string. The default read/write community string is 'netman', and the read only community string is 'public'. When attempting to connect to the ODU with Airmux Manager, type in the username and password but before clicking OK, click on the Options button which will expand the login dialog window. There you can enter the default read/write community string 'netman' (assuming someone hasn't changed it). If that doesn't work, you can contact RAD tech support who can generate a new community string with the MAC address from your ODUs.

Apr 15, 2009 | RAD Data Communications RAD RIC E3/ETH...

1 Answer

Help me Please


D-Link's default login should be "admin" and the default password "password". Try logging in with that.

May 01, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Lynksys router model befw11s4


You're going to have to reset the router, itself.  There's a reset button found on the back of the router.  Insert something small enough to fit in that hole, push & hold down the button for a few seconds. However, this will clear all the data from your router, including your settings...make sure you have all your settings information before resetting the router.

Sep 19, 2007 | Linksys WRLS BRIDGE |WMB54G MUSIC R

1 Answer

Speedstream modem 4200


put the modem in bridge mode and then connect a DSL/cable router to it...you'll have to configure the PPOE if its DSL... Cable is a little easier because there usually is a MAC authientication not username and password...plug dsl/cable router into cable modem...turn both off for about aminute then turn modem on first then router... Be careful most routers with wireless have it enable with no security by default...turn it off or set securty (wirelss that is)

Aug 27, 2007 | Siemens SpeedStream 4200 (13A4200001)...

Not finding what you are looking for?

Open Questions:

See all D-Link DI-604 4-Port Cable/DSL Router (DI-604) Questions

D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...