I turned off the phone to charge when I tried to turn it on, nothing, now the next day it tried to turn on and Critical error flashed. All I have done is taken the battery out and put it back in.
i had my phone in the computer putting music onto it, and then it had a spaz and came up with all these critical errors, and now my phone wont turn on at all
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a message that the phone is needing help as there is errors in the hardware or software.
soit will be good to have the phone checked for error codes so as to get the remedy from the Sony ericsson service centre.
If your device gets covered in water, act fast and rationally, and you may be able to save your device. 1. DO NOT TRY TO TURN IT ON 2. Pull out the battery. 3. Please your device and battery into a bowl of uncooked rice to absorb any moisture. 4. Please it in a warm, dry place where it can receive direct sunlight. 5. Be patient. It is recommended that you leave it in there for at least 48 hours. 6. After 48 hours, put the battery back in and power on.
The problem with the phone is in the firmware. There are a few websites who will flash the phone for you for a fee or you can take the phone to a repair shop to be flashed. The water damaged one will need to be taken apart and cleaned first. If you have any questions i provide these services my self and i would be glad to help!
I had exactly the same problem. After unsucessfully looking for a solution on the net I removed the simm chip and set it aside. The next day, I put it on PC usb charge and left it overnight. The next day, I powered it up and it worked. I turned it off and replaced the simm and it is now working fine. Go figure...