Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

Call drop out after 5mins 30 secs

Hi i have a telstra speedstream 4200 modem and a engin voip when the voip is connected to ss4200 i can talk on the phone forever. i purchased a dlink di524 router to run a computer in another room which works fine except with this all connected in the correct manner my voip drops out after 5mins 32 secs. i notice this is not uncommon looking at complaints on other sites. hope you can help as it is driving me insane and i have tried many fixes. cheers bob white.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi Youradickhead, I have experienced similar problems previously with Telstra and it was not due to the D-link as far as could verify. It seemed to me that Telstra was able to detect that you were using your internet connection for phone conversations and drop your line. Alternatively it may have to do with the filters that they provide. Try it without the filter, i.e. connect your modem cable straight into the socket (cable port).
Cheers.

Posted on Jun 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have siemens gigaset 504 AGU wi-fi modem. I am trying to connect this modem to my new broadband connection but it is not working. Please provide solution for this problem


You have to call your provider and let them know that you are putting on a new modem. they have to put all the new info into the system so the routers on there end let you in. If you have done that already reboot your router. Unplug it for 30 sec and then plug it back in. If still nothing then reset your router to factory default. you may have a conflict with the new modem.

Jun 23, 2011 | Siemens Efficient Networks SpeedStream...

1 Answer

Cd drive not working can't play cd to install thomson tg782t home network gateway from telstra



Try this:

Router setup

If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.


Dec 12, 2010 | Computers & Internet

1 Answer

Cant call out local or long distance.Phone number dialed want ring.WHY!!!


I assume you are talking about using a VOIP device such as vonage to make the calls? There are a fw things that will stop it from working. One is that the setup on the voip unit is wrong. It needs to know the gateway number which is just the ip number of the normal router connected to the cable or dsl modem. It can also be a port setting in your router. To see if this is the problem you can try connecting the voip device directly to the modem. Then try to make a call. If it works then you know it is a port or an ip setting. If it doesn't you could have a faulty voip device or it isn't being authorized by the company.

Oct 10, 2010 | Computers & Internet

1 Answer

At the bottom of my router are two icons, the modem and the internet, which are flashing orange. all other icons are blue. i am unable to get a connection. I also have VOIP connected to my router, if that...


Some routers will not get online if voip is connected while repairing connection. I would unplug your voip and try to connect then. Unplug your modem for about 30-45 seconds and then make sure all wiring is correct. Once you are able to connect the plug your voip back in. Internet light is not supposed to be orange but green or on some routers blue. If your modem aslo has orange light it is possible it is your provider issue. I would also check with them if steps i described above dont work. Good luck.

Apr 28, 2010 | Computers & Internet

2 Answers

I'm having a problem with my NETGEAR WGT624v3 router. I have it connected through a SPEEDSTREAM 4200 modem and have experienced no problem with the internet connection. However, after approx. 3 to 4 hours...


yes set the speedstream modem to log in. it is uner advanced, usually 192.168.0.1 address. It is most likely set to "bridged" mode and using the router to login. set login to ppoe on speedstream on one p.c. only 1st. with login ang password filled in and "smart keep alive" on.

Oct 31, 2009 | NetGear WGT624 Wireless Router

1 Answer

I have a Belkin F5D8636-A and cannot make voip calls


I have same problem. Just spoke to Engin and very helpful techo told me the "N" series modem/router is not compatible with VOIP.
Solution: None apparent except to downgrade.

Aug 31, 2009 | Belkin (F5D8231-4) Wireless Router...

1 Answer

CAN SOMEONE TELL ME WHERE TO GO TO DOWNLOAD A DRIVER FOR THE SPEEDSTREAM SS2604 ROUTER


You do not have to use the cd.
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If you need to set up the SSID and wirless encryption, here is the manual:


http://kb.efficient.com/display/1/kb/article.asp?aid=45334&r=0.8715326

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



Apr 12, 2009 | Siemens SpeedStream 2604 Router (obss2604...

1 Answer

Belkin g+ mimo router can't detect internet


have you tried resetting the network adaptor on the belkin, whictch provider are you using for internet connection?

Jan 25, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Internet connection problem Zhone 6211


After a while the net stops working then when i open the router page for the settings it starts back working

Aug 08, 2008 | Paradyne 6211 ADSL2+ Router (6211I1200)

1 Answer

Drop outs


You may try to open the voice ports on the router usually 5060 or it depend on the ports assigned.

May 24, 2008 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...