Question about Projection Televisions

1 Answer

Need code for digital tv --make daenyx-- - Projection Televisions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I HAS A DAENYX TV I LOCT THE REMOTE I GOT A UNIVSAL BUT ITS NOT WORKING

Posted on Mar 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need codes for universal remote


Hello
Three digit universal remote codes for Jvc TV are:
013/ 054/ 055/ 060/ 065/ 067/ 089
Four digit codes are:
0060 0026 0197 0069 0247 0923 0012 0065 0067 0141
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Jul 24, 2011 | JVC AV48P776 48" CRT TV

2 Answers

NEED CODE FOR ULTRAVISION DIGITAL tv


You'll have to get that code from your service provider.

Apr 16, 2010 | Hitachi 51F500 51" Rear Projection...

2 Answers

I want to find the Sky remote code for this Tv.


Just got an LG 42LH2000 and code 0206 works

May 16, 2009 | LG Projection Televisions

2 Answers

Ive lost my code book to my tv remote. so i havent had tv for a couple of days lol. the remote mak is Total Control URC-11-2840 and my tv is a sony i need the 4 digit code can you please help. much...


Sony 4 Digital Codes 0000 this is the only code showing in my book for sony RCA uses 000 for theres You can go to dollar store buy remote handunit for 5.00 with codes to TVs.

Jan 02, 2009 | Projection Televisions

2 Answers

I have a Daenyx tv then bought a philips universal remote (SRU3003/27) but the tv brand is not on the code list


i also own a 3003/27 and use a t.v that does not have a code. you can program your t.v by following these steps.
1: Manually turn on ur tv
2:hold setup untill red indicator stays on and release button
3: press and quickly release what you wanna program (i.e tv,vcr,ect.)
4:press channel up repeatedly untill your t.v changes channels(up to 300 times) if you over shoot the channel change press down til it changes again.
5: press and release MUTE to install the code.

Hope this helps you as it did me.

Sep 21, 2008 | Projection Televisions

2 Answers

Just purchased an Audiosonic KGR1 and I am unable to tune it in to my NEC TV. I have used all the codes in the manual but to no avail. The instructions state: 1. Manually turn TV on and select code for...


once you have input the code and the tv light stays off, try pressing the Standby button to see if your tv responds. if not then try the next code for your brand.

Aug 20, 2008 | Projection Televisions

1 Answer

I need the code for the remote control, so that i can use a universal remote. this is for a daenyx tv


If the instructions do not have your brand listed, there should be a Search function built in to the remote. It literally allows you to try every possible code in the remote's library.

Aug 18, 2008 | Projection Televisions

1 Answer

Need set up instructions and codes for one for all remote urc-3220


SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH+, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code procedure
as above, you may need to find out which four-digit code is operating
your equipment. For example, to find out which code is operating your
TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 0.The LED will blink twice.
4. To view the code for the first digit, press 1 once.Wait 3
seconds, count the LED blinks (e.g., three blinks = 3) and
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is “0”, the LED will not blink.
5. Repeat step 4 (on the previous page) three more times for
remaining digits.Use 2 for the second digit, 3 for the third
digit, and 4 for the fourth digit.Write down the code digits
in the remaining TV code boxes on page 8.
6. To check for codes of other devices, repeat steps 1
through 5 (starting on the previous page), but substitute
the appropriate device key for each device you are checking.
Write down the device’s code digits in the appropriate
code boxes on page 8.
I could not find the codes but you can follow these instruction to program without codes

Jun 19, 2008 | Projection Televisions

1 Answer

Well mr. fixya, i am up here in the central canada province of manitoba, in the small city of selkirk. my request is not new for many on this one, THE ORIGINAL IR SENSOR PRODUCT CODE SHIPPED WITH A...


My Solution to this changhong performance board inside this product is an older model and most are now in the recycaling campains accross the counrty. So I imagine that my pocket book is not as deep and convieniant as some.

Solution to this, My found DVDVCR model was a RECYCLABLE, so I cleaned the lens Dried out the water it had been rained on replaced a fiber cable that the baord had missing, and presto it returned to screen and a split proscan image which I then configured the IR control remotes on a manual seek and then locked in the code and turned off procan features. Now I am enjoying today's movies and VHS casettesto boot. Thank you for allowing me to explore the untapped potential of this knowledge base that hadf triggered my craze of configurated guides. Lauren

May 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...