Question about Motorola Mobility Moto Q

2 Answers

Motor Q My MotoQ have a black screen and said Motorola Flash Mode Bootloader Version: Boot_C_03,09,00R_MPAP and don't work.

Posted by on

  • Anonymous Jun 27, 2008

    Yes I do...I can't turn this phone on and it says: Bootloader Version:

    BOOT_C_03.05.00R_MPAP



    Can anyone help me? mblumen456@aol.com

  • Anonymous Jun 27, 2008

    My Q phone has completely stopped workini. I'm not sure if this is an error message but is says Bootloader Version: BOOT_C-03.05.00R_MPAP. I have had other issues with this phone, but this is the 1st time it completely shut down. Please advise me what to do.



    mblumen456@aol.com

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with mine. Question is how to remove any recently installed software if its stuck in flash mode? I tried removing the battery for a couple hours, hard reset same condition no matter what I do.

Posted on Jun 23, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 260 Answers

I recommend removing any programs you recently added and then try loading them again. Also, whenever you have a program that is not working, try removing the battery and reinstalling it to reset the phone. Third, consider a master reset of the phone. Unfortunately, you will lose all of your information. Then reinstall all of your person stuff. Start, System Tools, Master Reset. It helps to think of your Q like a windows based operating system on your computer. Good luck.

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My moto q classic is stuck in a flash mode it says. its a black screen that pops up saying, motorola flash mode bootloader version BOOT_C_03.08.00R_MPAP charger connected please connect the...


Your system software / firmware has become corrupted. You need to download and install replacement firmware for your phone. You need to choose the correct firmware for your exact model and service provider / carrier for it to work.

I wrote fixya tip on how to do this a few months ago, the links are below. But don't use the verizon firmware unless verizon is your carrier - get your carriers firmware from Motorola's MotoQ website.

Or, just take it into your service providers store and get them to do it.

I hope that helps.
________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Aug 30, 2010 | Motorola Mobility Moto Q

1 Answer

Motorola flash mode bootloader versionBOOT_C_03.05.00R_MPAP


I can help you with your Motorola MotoQ.

What has happened is that the firmware, or system software, of your phone has become corrupted. When this happens your phone will no longer boot or be recognized by the computer.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech there.)

If you are handy with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jul 09, 2010 | Motorola Mobility Moto Q

1 Answer

Phone is stuck in motorola FLASH MODE then below that it says bootloader.It does that every time i caught the phone on


I can help you with your Motorola Moto Q flash boot screen.

What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence.

This is a very common situation with many phones; also with MP3 players, GPS devices and cameras.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jun 15, 2010 | Motorola Mobility Moto Q

1 Answer

Phone is stuck on weird motorola flash mode screen


I can help you with your Motorola Moto Q flash mode screen problem.

What has happened is that the firmware / system software of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash the firmware for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jun 14, 2010 | Motorola Mobility Moto Q

1 Answer

Blank screen saying Motorola flash mode boot loader version


I can help you with your Motorola Moto Q flash boot screen.

What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jun 13, 2010 | Motorola Mobility Moto Q

1 Answer

Motorola Flash Mode Bootloader Verson: Boot_C_03.08.oor_MPAP


I can help you with your Motorola Moto Q flash boot error screen.

What has happened is that the system software of your phone has become corrupted. When this happens your phone will no longer finish (or start) its boot sequence.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jun 12, 2010 | Motorola Mobility Moto Q

1 Answer

Motorola flash mode bootloader version; BOOT_C_03.00.00r MPAP usb cable connected ------ thats all that appears on my screen please help


I can help you with your Motorola Moto Q.

What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence.

This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware.

The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.)

If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times.

My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone.

I hope that helps.
_________________________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Jun 10, 2010 | Motorola Mobility Moto Q

3 Answers

Motorola flash mode bootloader version BOOT_C_03.08.00R_MPAP


I CANT DO ANY THING WITH MY MOTOROLA Q. IT HAS A BLACK SCREEN THAT SAYS MOTOROLA FLASH MODE BOOTLOADER VERSION:
BOOT_C_03.05.00R_MPAP

Nov 09, 2008 | Motorola Mobility Moto Q

Not finding what you are looking for?

Open Questions:

0 Answers

boot_c_03.08.00r_mpap Paul Sager from FixYa has posted a solution for this problem previousley (as below). I have tried the Motorola and Verizon sites (tried the store as well) and the software is not available to flash the phone. Do you know of a site that would still have it available? Or can this question be sent to Paul to further comment on it? All I want to do is recover the phone numbers, notes and calandar from the phone via Activesync or Windows. Paul Sager 2335 Solutions July 14, 2010 I can help you with your Motorola Moto Q. What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence. This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware. The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.) If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times. My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone. I hope that helps.

Oct 09, 2012 | Motorola Mobility Moto Q

See all Motorola Mobility Moto Q Questions

Motorola Mobility Moto Q Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility PDAs Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

AJMAL KHAN

Level 2 Expert

380 Answers

Abby Carter

Level 3 Expert

268 Answers

Are you a Motorola Mobility PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...