Question about Canon PIXMA iP2200 InkJet Photo Printer

1 Answer

My canon ip2200 does not recognize my CL 41 ink. The resume button is constantly flashing yellow. How do i fix the problem? i have already replaced my ink twice with new ink. The most recent time it worked was when i refilled the ink until it suddenly stopped.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

This is a direct result of refilling the cartridge. What has happened is yuo extended the life of the cartridge by refilling it, but the ink counter is still counting the first cartridge cycle, whick has reached its limit. Try this: remove the cartridge, close the printer and power down. Turn it back on, insert the cartridge, and you should see a dialog box on your computer screen that says something like " a used ink cartridge has been installed". Press ok on that window. Another window should pop up in a minuter that will say "This is a used cartridge, and canon is not responsible for any damage...blah blah." Do NOT press ok on this window. Instead, now press the resume button on the printer. This will Clear the ink counter, and disable it until that cartridge is removed. You should follow this procedure every tim you refill one of these carts. It is just something Canon has done to discourage refilling their carts, as they lose money. Let me know if you need any further assistance.

Posted on Sep 30, 2010

  • regan_huang Sep 30, 2010

    I have already followed those processess when I first installed the refilled ink. The message was prompted and I followed the instructions that were given. I now have a issue that any CL 41 I bought is not working. I have not bought the Canon brand 41 ink and will consider that option.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon Pixma MP210 will not recognize high yield PG-50 & CL-51 cartridges.


The canon pixma mp 210 uses PG-30, CL-31, PG-40, CL-41
It will not recognized the PG-50 & CL- 51
See if you can return it and exchange it for the PG-40 & CL-41.
If not, the only other way is to transfer the ink into the other ink cartridges.
The cartridge cap can be removed by a sharp tap at the back end of the cover.
You can glue back the cover.
If there is an E 1,6 Error code, Ink has run out after you install your ink cartridges
Press and hold the stop/reset button for about 10 seconds to clear the error code.

Dec 24, 2010 | Canon Office Equipment & Supplies

2 Answers

Is MP210 and MP240 the same? can i use the same cartridge?


no both are different
Here are the list of cartridges u can use
MP210
PG-30 Pigment Black
PG-30 Pigment Black Ink Cartridge
PG-40 BLACK
CL-31 Color FINE Ink Cartridge
CL-41 Color
MP240
PG-210 Black Cartridge
CL-211XL Color Cartridge
CL-211 Color Cartridge
PG-210 XL Black Cartridge

Nov 28, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

I have pixma iP2200, what do I do to reset


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

Oct 08, 2009 | Canon PIXMA iP2200 InkJet Photo Printer

1 Answer

I have to get a printout... When I went to my IP2200, I found several pages jammed. I simply pulled them out and rebundled the paper and set them in the feed tray. I then pushed the resume button, which...


Hi. In such situations it is best to reset the printer.
This procedure resets canon iP1200 /iP1600 / iP2200 printers.

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

Jul 29, 2009 | Canon Office Equipment & Supplies

1 Answer

Canon ip1800 printer not working


Hi,

when the yellow led flashes is never a good signal... you should check the manual's printer to find out the error code meaning "4 yellow flashes and 1 green)
Usally it's the waste tank that is full, in this case you need to:

  1. Push “resume” for 5 seconds for canon IPXXXX.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again

Jul 18, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Price of catridge of cannon ip1300


these are the cartridges used in 1300

CL-41 FINE Colour Cartridge
PG-40 FINE Black Cartridge
click here for cl 41 prices
http://www.google.com/products?q=cl-41

Click here for pg-40 prices
http://www.google.com/products?q=pg-40



Let me know if you need anything else.
Thanks,
Ekse

Mar 05, 2009 | Canon PIXMA iP1300 Printer

1 Answer

Refurb. Ink cartridge problems


Make certain that the labels on the cartridges are in the right postion. For instance the PG40 label should be near the two lugs at the top and NOT near the curved lug. It seems that the chip is near the curved lug maybe in the circular indent.

Feb 18, 2009 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Mp145 ink


Canon PG-40 Black
High Capacity Canon PG-40 Black Ink Cartridge
Pixma Series: iP1600/ iP1700/ iP1800/ iP1180/ iP1200/ iP1300/ iP1880/ iP2200/ iP2500/ iP2580/ iP2600/ MP150/ MP160/ MP170/ MP180/ MP450/ MP460/ MP470/ MP470SE/ MP140/ >>>>MP145<<<<
MP210/ MX300/ MX308/ MX310/ MX318/ iP6310D

Canon CL-41 Color
High Capacity Canon CL-41 COLOR Ink Cartridge
Pixma Series:
iP1600/ iP1700/ iP1800/ iP1180/ iP1200/ iP1300/ iP1880/ iP2200/ iP2500/ iP2580/ iP2600/ MP150/ MP160/ MP170/ MP180/ MP450/ MP460/ MP470/ MP470SE/ MP140/ >>>>MP145<<<<
MP210/ MX300/ MX308/ MX310/ MX318/ iP6310D

Jan 08, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Cl-41 to cl-51


You have ordered incompatible cartridges. You need CL38 (colour) and PG37 (black). They do not fit your machine. Send them back for a refund.

Aug 07, 2017 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Canon pixma ip2200


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. – I would greatly appreciate a FixYa! rating if the solution I provided fixed or helped you resolve your problem.

Thank you for using FIXYA!

Cheers!
IrishDruid

Nov 03, 2008 | Canon PIXMA iP2200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP2200 InkJet Photo Printer Logo

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...